Loading...
Search for: torabi--fariba
0.121 seconds

    Fabrication and Optimization of Organic Inorganic Perovskite Solar Cells Using Vapor Phase Deposition

    , Ph.D. Dissertation Sharif University of Technology Sedighi, Rahime (Author) ; Taghavinia, Nima (Supervisor) ; Tajabadi, Fariba (Supervisor)
    Abstract
    In this research, we focus on study and fabrication of organic inorganic solar cells. We use and optimize various methods such as one-step spin-coating, two-step sequential deposition and vapor-assisted solution process (VASP), to prepare high quality perovskite films. One-step deposition is simplest method for deposition of perovskite films. Although perovskite deposition by this method is very simple, the control of uniformity and surface film morphology is difficult. Chlorine inclusion, optimization of annealing conditions, and a sequential solution-based deposition method have been demonstrated to increase film coverage and uniformity. Hence, we use sequential deposition method for... 

    Investigation of Quantum States of Light (Generation and Utilization Their Special Properties) in Quantum Information Science and Precision Measurements

    , M.Sc. Thesis Sharif University of Technology Hosseinynejad Khaledy, Fariba Sadat (Author) ; Karimipour, Vahid (Supervisor)
    Abstract
    Quantum entanglement and superposition are wonderful and mysterious phenomena of quantum mechanics. By means of quantum entanglement, two or more systems become partner in state of each other . As a result, measurements on each of these systems affect the status of other systems. Quantum superposition allows a system inhabits several of its possible quantum states simultaneously. These two features are applicable in many technologies in present age. Photons, as an quantum unit of light, are appropriate candidate for utilization these properties. Because they are robust to decoherence and for their preparation exist various methods. Hence, we interested to generation of quantum states of... 

    A Study on Action Selection Deficits in Schizophrenic Patients Using Computational Modeling in Reniforcement Learning Framework

    , M.Sc. Thesis Sharif University of Technology Aghajari, Sara (Author) ; Vosoughi Vahdat, Bijan (Supervisor) ; Bahrami, Fariba (Supervisor)
    Abstract
    Schizophrenia is a devastating disorder that steals the opportunity of having a normal life from the sufferers. Drugs used in treating this disorder usually target psychotic symptoms and do not affect negative symptoms effectively. One of the deficits falling into this category is the impaired reversal learning. These patients usually learn the rules but do not renounce them after the contingencies of reward have been reversed. To investigate the reasons of this impairment, first a hypothesis of how different parts of the brain communicate during reversal learning is proposed using the physiological evidence. Then considering the known relation between the actor-critic model of the... 

    Improvment of Perovskite Layer and Perovskite/Hole Transport Layer Interface to Inhance Perovskite Solar Cell Performance

    , Ph.D. Dissertation Sharif University of Technology Taherianfard, Hossein (Author) ; Taghavinia, Nima (Supervisor) ; Tajabadi, Fariba (Supervisor)
    Abstract
    The use of renewable energy sources has received much attention due to the increasing need for energy, limited energy resources and the pollution of fossil fuels. Among all types of solar energy conversion technology, photovoltaics has the highest technical potential and Iran’s geographical location is very suitable for benefiting from this energy. So, in this thesis, the fabrication and characterization of nanostructured solar cells based on organic-inorganic perovskites have been investigated. Many research goups have tried to increase the efficiency of perovskite solar cells. The efficiency of this kind of solar cells depends mainly on the light-absorbing layer (perovskite) and its... 

    Physical Modeling of Effect of Liquefaction-Induced Lateral Spreading on Single Piles

    , M.Sc. Thesis Sharif University of Technology Torabi, Hooman (Author) ; Haeri, Mohsen (Supervisor)
    Abstract
    Pile foundations suffered severe damages during the past earthquakes in all around the world. These damages were more severe in laterally spreading grounds and they mostly have been observed in gently sloping grounds and coastal areas. In these cases, Pile foundations not only are subjected to structures inertial loads and kinematic loads of liquefied soil but also lateral spreading intensifies damages. Thus, in the recent decade, several researches have been conducted to investigate the behavior of pile foundations in liquefiable and laterally spreading grounds, however, some uncertainties still remain in modeling of soil-pile interaction. In this study, the effects of liquefaction- induced... 

    Existence of Global Solution for Two Models of Cancer Invasion

    , M.Sc. Thesis Sharif University of Technology Torabi, Mousa (Author) ; Hesaaraki, Mahmoud (Supervisor)
    Abstract
    In this thesis we investigating two models of cancer invasion .First, a general mathematical model of cancer invasion is presented. In this model there are three factors: tumor cell, extracellular matrix and enzyme. The model consists of a parabolic partial differential equation (PDE) describing the evolution of tumor cell density , an ordinary differential equation modeling of extracellular matrix and a parabolic PDE governing the evolution of the matrix degrading enzyme concentration. This model is investigated in two special versions for existence and uniqueness of global solutions. In the first model we neglect the remodeling term, this model is named the chemotaxis-haptotaxis model.... 

    “Determination of Economic Order and Production Quantity in Inventory System Regarding the Quality of Items”

    , M.Sc. Thesis Sharif University of Technology Torabi, Hassan (Author) ; Haji, Rasoul (Supervisor)
    Abstract
    EOQ and EPQ models have been among the most important and commonly used techniques for about 100 and 60 years respectively .But, they are involved in some assumptions that sometimes prevent them from being implemented in real situation of industry and production. One of these unrealistic assumptions is that all of items received or produced are of perfect quality. In order to overcome this constraint and make the mentioned models closer to the real environmentsome researches have been done. To this end,following the previous attemptsin this project we assumed to have destructive inspections and existence of imperfect and rejected items after rework. In our models, considering 3 circumstances... 

    Analysis and Simulation of Mars Rover Curiosity in the X and UHF Bands

    , M.Sc. Thesis Sharif University of Technology Torabi, Masoud (Author) ; Forouhar, Farzaneh (Supervisor)
    Abstract
    Mars rover Curiosity is a mobile scientific laboratory which it’s mission is to assess the biological potential of the landing site and characterize the geology of the landing region. This rover communicate to a Mars orbiter named MRO satellite in the UHF band which relies the signals to the Earth stations. Also this rover communicate to the Earth stations directly in the X band. In this thesis, we determine the technical characteristics of stations and simulate Earth-Mars radio links. So we calculate :
    1. determine the technical characteristics of Earth stations
    2. determine the technical characteristics of satellite and Curiosity
    3. Earth-Mars orbital position in the... 

    Impedance Control of a Knee Rehabilitation Exoskeleton Using Robust Adaptive Control

    , M.Sc. Thesis Sharif University of Technology Torabi, Mansour (Author) ; Vossoughi, Gholamreza (Supervisor)
    Abstract
    The present study deals with designing controller for Therapeutic Exercise Robots which belongs to larger group namely Rehabilitation robots. Therapeutic exercise robots are often realized in shape of exoskeleton robots. The main line of present research is involved with, designing controller for lower limb therapeutic exercise robots and offering and implementing technical rehabilitation ideas. Firstly, in order to have a reliable position-control, considering practical limitations (e.g. system uncertainties), a robust adaptive control has been designed. Adaptive control can deals with parameters uncertainties and covering unstructured uncertainties (e.g. disturbance and noise) can be... 

    Effect of lateral placement of ceramic and metal grains on thermal stress distribution throughout FGMS

    , Article 28th Congress of the International Council of the Aeronautical Sciences 2012, ICAS 2012 ; Volume 3 , 2012 , Pages 1878-1884 ; 9781622767540 (ISBN) Torabi, A ; Abedian, A ; Sharif University of Technology
    2012
    Abstract
    The properties of Functionally Graded Materials (FGM) are characterized by gradual variation of volume fraction of their constituents or phases over the thickness direction. They are normally ceramic in one side and metal in the other side. This kind of material has been employed as thermal barrier and also as coatings in many applications including turbine blades. Thermal stress behavior of FGMs is normally studied by simulating the material as a composite laminate where the properties ofeach layer are found by averaging the properties and volume fraction of FGM constituents through the thickness of the layer. However, it should be mentioned that the grains of FGM constituents are usually... 

    A kinetic study on the electrodeposition of nickel nanostructure and its electrocatalytic activity for hydrogen evolution reaction

    , Article Journal of Applied Electrochemistry ; Volume 40, Issue 11 , November , 2010 , Pages 1941-1947 ; 0021891X (ISSN) Torabi, M ; Dolati, A ; Sharif University of Technology
    2010
    Abstract
    The electrodeposition of nickel was studied using electrochemical techniques in different electrolytes and various agents. The voltammetry analysis clearly showed that the electrodeposition of nickel was a diffusion-controlled process associated with a typical nucleation process. The current transients represented instantaneous nucleation with a typical three-dimensional (3D) growth mechanism. Scharifker's equations were derived for instantaneous and progressive nucleation of the 3D growth of the spherical centers under diffusion-controlled condition. The number of nucleation sites increased with the increment in overpotential and Ni 2+ concentration. Atomic force microscopy was used to... 

    An Integrated Simulation-DEA Approach to Multi-criteria Ranking of Scenarios for Execution of Operations in a Construction Project

    , M.Sc. Thesis Sharif University of Technology Torabi, Mojtaba (Author) ; Mahlooji, Hashem (Supervisor)
    Abstract
    Before a construction project gets under way an attempt is made to examine different ways and scenarios for its implementation. Through such a process the more appropriate scenarios should be selected based on several criteria that are not necessarily at the same level in terms of importance. The purpose of this study is to examine different scenarios for implementing operations in the pre-construction phase of a project, based on several competing criteria with different importance levels in order to achieve a more efficient execution plan. This paper presents a new framework that integrates discrete event simulation (DES) and data envelopment analysis (DEA) to rank different scenarios for... 

    Studying the Characteristics of 2D Materials for Electronic Circuits Devices Master Thesis

    , M.Sc. Thesis Sharif University of Technology Torabi, Naghmeh (Author) ; Fardmanesh, Mehdi (Supervisor)
    Abstract
    The need for further improving the operation of the electronic and optoelectronic devices to raise the speed of the circuits, and to decrease their power dissipation, has led many researchers to investigate the structure of 2D material, such as graphene, transition metal dichalcogenides (TMDs) as MoS2, and other 2D compounds such as BN, due to their prominent electronic properties. TMDs have the highest significant potential for the next generation transistors due to their salient semiconductor characteristics such as electron mobility, band gap, and conductivity. For instance, Graphene is a favorable candidate for analog devices due to zero bandgap. Regarding the importance of bandgap in... 

    An investigation of the surface morphology of nanostructured nickel thin films prepared by electrodeposition

    , Article International Journal of Surface Science and Engineering ; Volume 10, Issue 5 , 2016 , Pages 444-455 ; 1749785X (ISSN) Torabi, M ; Dolati, A ; Sharif University of Technology
    Inderscience Enterprises Ltd  2016
    Abstract
    Nickel nanostructure thin films were electrodeposited on copper plates to investigate the fractal study. Scharifker's equations were derived for instantaneous and progressive nucleation and 3D growth of hemispherical centres under diffusion-controlled condition to calculate in situ change of fractal dimension of surface. It was assumed that the layer could be formed completely when fractal dimension of surface inclined to 2. Moreover, the fractal analysis of atomic force microscopy (AFM) images has confirmed the presumed model. Also, the power values of power spectral density (PSD) of the AFM images were determined using fast Fourier transform (FFT) algorithms. The PSD plots are approximated... 

    Thesis Submitted in Partial Fulfillment of the Requirements for the Master's Degree in TEFL

    , M.Sc. Thesis Sharif University of Technology Torabi, Fariba (Author) ; Salehi, Mohammad (Supervisor)
    Abstract
    In the last decades, Reaction Time research has been extended to cognitive science and more specifically human information-processing research and has gained momentum (Shim, 1996). The present study examined the reaction time in processing marked and unmarked structures with regard to the four types of conditionals (considered as unmarked, less marked, marked and strongly markedness, respectively) and prepositions (preposition pied piping that is considered as unmarked and preposition stranding as marked). To this end, two softwares were developed for which the items relating to conditionals were chosen from the Bernet’s test (1985) and the ones pertinent to prepositions were taken from... 

    A novel approach for robust control of single-link manipulators with visco-elastic behavior

    , Article 10th International Conference on Computer Modelling and Simulation, EUROSIM/UKSim2008, Cambridge, 1 April 2008 through 3 April 2008 ; 2008 , Pages 685-690 ; 0769531148 (ISBN); 9780769531144 (ISBN) Torabi, M ; Jahed, M ; Sharif University of Technology
    2008
    Abstract
    Overwhelming number of control laws has been studied for control of robot manipulators with rigid links and joints. However controllers designed under this assumption may not accurately control the manipulator link due to visco-elastic properties that appear in the link behavior. In this study, a novel approach for robust control of a single-link manipulator is presented to force the link to have rigid motions, while it has visco-elastic behavior. In this regard, initially robot dynamics is extracted, followed by the design of four appropriate controllers through the loop-shaping approach. The obtained model is first represented in state space, however later converted to transfer function... 

    Impedance analysis of growth and morphology of electropolymerized polypyrrole nanocomposites [electronic resource]

    , Article Journal of New Materials for Electrochemical Systems ; 2014, Volume 17, Number 2 Torabi, M. (Morteza) ; Sadrnezhaad, S. K ; Sharif University of Technology
    Abstract
    Pure polypyrrole (PPy), PPy/Al2O3 and PPy/SiO2 nanocomposites synthesized galvanostatically using different polymerization charges. Electrochemical impedance measurements of pure polypyrrole revealed that the film thickness affected the impedance responses. The characteristic frequencies vs. film thickness that obtained using Cole-Cole plots showed that electrodeposition mechanism changed from 3D to 1D after nuclei overlapping for pure PPy. Analysis of the nanocomposites impedance spectrums revealed no changes during the film growth, i.e. deposition continues 3D even after nuclei overlapping. Scanning electron microscopy (SEM) confirmed the impedance results and showed that the morphology of... 

    Integrated procurement, production, and delivery scheduling in a generalized three stage supply chain [electronic resource]

    , Article International Journal of Industrial and Systems Engineering (JISE)-Iranian Institute of Industrial Engineering ; 2009, Vol. 3, No. 3, pp. 189-212 Nikandish, N. (Nasser) ; Eshghi, Kourosh ; Torabi, S. Ali ; Sharif University of Technology
    Abstract
    In this research, we investigate a three-stage supply chain with one supplier, several manufacturers and multiple retailers where the supplier provides a common raw material to each manufacturer, who in turn uses a single stage production facility to convert it into final products that are delivered at fixed lot sizes to retailers. An integrated economic procurement, production, and delivery model is developed whose objective is to find the common production cycle length, production sequences of final products at manufacturers and delivery frequencies of final products to retailers minimizing the total costs of considered supply chain. We propose an analytical solution procedure and an... 

    An accurate derivation of spatial green's function for finite dielectric structures using characteristic green's function-perfectly matched layer method

    , Article IEEE Transactions on Antennas and Propagation ; Vol. 62, Issue. 6 , 2014 , pp. 3201-3211 ; ISSN: 0018926X Torabi, A ; Shishegar, A. A ; Sharif University of Technology
    2014
    Abstract
    A closed-form spatial Green's function for a truncated dielectric slab is derived by using a combination of the characteristic Green's function (CGF) and perfectly matched layer (PML) method. The original structure is terminated by PML that is backed by perfect electric conductor (PEC) in semi-infinite layer at the top and/or bottom. The eigenmodes of the closed structure by PML construct the continuous spectrum contribution of the original structure efficiently. Derived Green's function is exact for separable finite structure while it is approximate for nonseparable one especially in the corners. Generalized scattering matrix (GSM) of truncating surface which contains possible conversions... 

    An efficient 2D rough surface scattering analysis using strong harmonics extraction and the Kirchhoff approach

    , Article Applied Computational Electromagnetics Society Journal ; Volume 29, Issue 2 , 1 February , 2014 , Pages 163-169 ; ISSN: 10544887 Torabi, A ; Shishegar, A. A ; Sharif University of Technology
    2014
    Abstract
    An efficient method for scattering analysis from slightly rough surfaces is introduced. This method can be used in ray tracing algorithm where the computational efficiency is important due to the complexity and size of problems. In this method, the Kirchhoff approach is used for a periodic extension of the finite surface, which is approximated by strong harmonics of its Fourier series. Typical asphalt surfaces are analyzed by this method in millimeter-wave band and validated with the method of moments. The dominant scattering angles and ray widths of the scattered field can be easily used in ray tracing algorithm. The computation time and accuracy of results show that this method can be used...