Loading...
Search for:
torkaman--maryam
0.146 seconds
Total 111 records
, M.Sc. Thesis Sharif University of Technology ; Borgheei, Mahdi (Supervisor)
Abstract
Removing nitrogen, as one the most surface and ground water contaminant is very important and in order to achieve this aim,nitrification and denitrification are effective and economical methods. In this work, moving bed biofilm reactor (MBBR) with initial denitrification structure, adapted from modified LUDZACK-ETTINGER (MLE) method used in order to industrial wastewater treatment with COD value in range of 900-2100 mg/lit and ammonium in range of 150-430 mg/lit in 3 hydrolic retention time of 18 , 12 and 8 hours.Aerobic reactor volume is 14.4 liter and anoxic reactor volume is 7.2 liter and reflux flow amount from aerobic reactor to anoxic reactor has considered being 3 times of anoxic...
A Logic For Ambient Intelligence
, M.Sc. Thesis Sharif University of Technology ; Izadi, Mohammad (Supervisor)
Abstract
Monitoring of activities of elderly and intelligent decisions about their living environment is a key challenge in smart environments. In the case of such challenges, correctness of system performance is highly dependent on how the model is designed. In the ambient intelligence (AMI) modeling, formal modeling is one of the best approaches because it supports certainty. In addition, time, location and mobility in AMI are crucial requirements, particularly in emergency treatment services. Ambient calculus is a formalism for describing mobility, process migration and message transfer, but it cannot express metric time duration. In this paper we propose an extension of ambient calculus with time...
3d Design of a Microfluidic Chip for Anticancer Drugs Screening
, M.Sc. Thesis Sharif University of Technology ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
Abstract
Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the...
Removal of BTX compounds from wastewaters using template free MFI zeolitic membrane
, Article Iranian Journal of Chemistry and Chemical Engineering ; Volume 29, Issue 4 , 2010 , Pages 91-98 ; 10219986 (ISSN) ; Kazemian, H ; Soltanieh, M ; Sharif University of Technology
2010
Abstract
MFI zeolite membranes were prepared on porous α-alumina substrates, using secondary growth of nano-seeded layers. The resulting membranes were characterized by means of Scanning Electron Microscopy (SEM), X-Ray Diffractometry (XRD), and pervaporation performance tests for separation of Benzene, Toluene and Xylene (BTX) mixture from contaminated water. The morphology, thickness, homogeneity, crystal preferential orientation and permeation properties of these membranes have been studied in relation to the seed layers. Successful separation of BTX mixture from water was performed by using the manufactured MFI zeolite membrane. The influence of temperature, feed concentration on the membrane...
Atomistic simulations of mechanical properties and fracture of graphene: A review
, Article Computational Materials Science ; Volume 210 , 2022 ; 09270256 (ISSN) ; Kouchakzadeh, M. A ; Sharif University of Technology
Elsevier B.V
2022
Abstract
Material properties and fracture characteristics are among the most prominent parameters that should be considered for a wide range of graphene applications. This article reviews recent advances in theoretical studies on the mechanical properties and fracture behaviors of graphene, focusing on the effect of various simulation models. Most studies investigated single-layer graphene sheets (SLGSs) under uniaxial tensile tests using different common interatomic potentials, particularly AIREBO. Although researchers have examined a similar problem, specifically for pristine graphene, the differences in the reported values are considerable. These discrepancies are most evident in fracture...
Model Checking of Stochastic Activity Networks
, M.Sc. Thesis Sharif University of Technology ; Movaghar, Ali (Supervisor)
Abstract
Modeling and performance evaluation of the real time distributed systems is a significant problem. Stochastic activity network is one of the high level models used for this purpose. This network is an extension of generalized stochastic Petri net which is more powerful and flexible than other Petri net extensions. Checking the satisfiability of properties such as performance, dependability and user's expected properties is considerable in these models. Thus, using the approaches and generating modeling and model checking tools with the mentioned purpose is attractive. A model checker automatically checks the correctness of the system behaviors as properties against the model by getting the...
Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter
, M.Sc. Thesis Sharif University of Technology ; Saadatmand, Maryam (Supervisor)
Abstract
Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac...
Robust Estimation and Control of a Planet Lander
, M.Sc. Thesis Sharif University of Technology ; Kiani, Maryam (Supervisor)
Abstract
This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of...
Optimal Control of Unknown Interconnected Systems via Distributed Learning
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
This thesis addresses the problem of optimal distributed control of unknown interconnected systems. In order to deal with this problem, a data-driven learning framework for finding the optimal centralized and the suboptimal distributed controllers has been developed via convex optimization.First of all, the linear quadratic regulation (LQR) problem is formulated into a nonconvex optimization problem. Using Lagrangian duality theories, a semidefinite program is then developed that requires information about the system dynamics. It is shown that the optimal solution to this problem is independent of the initial conditions and represents the Q-function, an important concept in reinforcement...
Utilizing Gaussian Processes to Learn Dynamics of Unknown Torques Acting on a Spacecraft
, M.Sc. Thesis Sharif University of Technology ; Kiani, Maryam (Supervisor)
Abstract
Accurate and fast attitude estimation of a rigid body plays an essential role in the performance of a vehicle’s control system, especially aerospace vehicles. Ample works have been done to increase the accuracy and speed of the attitude estimation process, but all have been developed according to a model-based approach. This approach assumes that the torques acting on the body have a known dynamical model that is used for the attitude estimation. The purpose of the present research is to estimate the attitude via a model-free approach, i. e. dynamics of the torques acting on the body are no longer assumed to be known, and its learning is the next step. Thus, the problem formulation of this...
Stabilization and Pole-Placement by Structurally-Constrained Controllers: A Graph-Theoretic Approach
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops...
Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model
, M.Sc. Thesis Sharif University of Technology ; Saadatmand, Maryam (Supervisor)
Abstract
Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,...
Design of Microfluidic Chip for 3D Cell Culture
, M.Sc. Thesis Sharif University of Technology ; Saadatmand, Maryam (Supervisor)
Abstract
Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this...
Optimal Energy Trading in a Smart Grid Based on Extremum-seeking Algorithm
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
Prevalent deployment of Distributed Energy Resources(DERs) in the demand side of electrical energy grids has several advantages such as greenhouse gases emission reduction, mitigation of power losses in the distribution grids and abatement of the dependency on the wholesale generation companies. At the same time, it paves the way for the advent of local interactive energy trading frameworks. In the following thesis, a distributed data-driven algorithm is developed for market-clearing in a community-based local energy market. The social welfare maximization is considered as the objective of the energy trading. The production and demand of electricity are the decision variables of sellers and...
Navigation and Control of a Free-Flying Satellite for Cargo Transportation and Placement in Intra-Vehicular Environment
, M.Sc. Thesis Sharif University of Technology ; Kiani, Maryam (Supervisor)
Abstract
The main topic of this research is the navigation and control of a free-flying satellite with a robot manipulator while transferring and placing cargo on a space station. After connecting the cargo module, astronauts and robots need to deliver the available loads to the desired modules in a space station. Capturing an object or cargo is a critical issue studied extensively so far. However, delivery and placing of the cargo at the target point have not been investigated yet, to the best of the author’s knowledge; hence, this is a primary motivation for conducting the proposed research. After capturing the payload, the position and attitude of the manipulator with respect to the station’s...
Fixed-Time Consensus Control of Unknown Multi-Agent Systems Based on Distributed Reinforcement Learning
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
This thesis introduces a distributed backstepping control strategy based on reinforcement learning to achieve fixed-time consensus in high-order nonlinear multi-agent systems. Each agent, whether a leader or a follower, is modeled using a strict feedback approach, incorporating uncertainties as unknown nonlinear functions and disturbance signals across all state variables. The communication network among agents can be either directed or undirected, with a fixed topology. Each follower employs a control law derived from actor-critic networks, utilizing only the outputs from neighboring agents. The proposed method combines virtual and actual backstepping control laws, formulated from two key...
Precise Cosmology with Redshift Space Distortion and Calculating Pecular Velocity of SNe type Ia
, M.Sc. Thesis Sharif University of Technology ; Baghram, Shant (Supervisor)
Abstract
The distance measurement is the corner stone of the modern cosmology. They are measured via ”Doppler Effect”, accordingly the distances in cosmology are obtained in red-shift space. Despite the cosmological background expansion, the peculiar velocities due to the local density contrast distort these measurements. One of the main challenges in upcoming cosmological studies is to distinguish the peculiar velocity effect from the background expansion.Supernova Type Ia as standard candles can be think of a crucial observation to address the above problem. In this thesis, we study the effect of cosmological perturbations on distance-redshift relation of the SNIa. The corrective effects are from weak...
Free vibration analysis of cylindrical shells partially resting on an elastic foundation
, Article Meccanica ; Volume 51, Issue 5 , 2016 , Pages 1113-1125 ; 00256455 (ISSN) ; Firouz Abadi, R. D ; Sharif University of Technology
Springer Netherlands
2016
Abstract
The present study aims at the investigation of free vibration analysis of thin cylindrical shells surrounded by an elastic medium, which is distributed over a particular length of the shell. The Love’s shell theory is utilized along with the Winkler foundation to obtain the governing equations of motion. An exact series expansion method of solution is employed for any arbitrary boundary conditions. The excellent accuracy of the obtained results is validated by comparing to the available literature. Moreover, several case studies are performed to provide an insight into the influence of some practically important parameters on free vibrations of circular cylindrical shells, including...
Employing humanoid robots for teaching english language in Iranian junior high-schools [electronic resource]
, Article International Journal of Humanoid Robotics ; Vol. 11, No. 3 (2014) 1450022 ; Meghdari, Ali ; Ghazisaedy, Maryam ; Sharif University of Technology
Abstract
This paper presents the effect of robotics assisted language learning (RALL) on the vocabulary learning and retention of Iranian English as foreign language (EFL) junior high school students in Tehran, Iran. After taking a vocabulary pre-test, 46 beginner level female students at the age of 12, studying in their first year of junior-high participated in two groups of RALL (30 students) and non-RALL (16 students) in this study. The textbook used was the English book (Prospect-1) devised by the Iranian Ministry of Education for 7th graders, and the vocabulary taught and tested (pre-test and post-test) were taken from this book. Moreover, the treatment given by a teacher accompanied by a...
Productivity Improvement Management Cycle at the Deeds and Properties Registration Org. of Tehran Province
, M.Sc. Thesis Sharif University of Technology ; Eshragh Nia Jahromi, Abdol Hamid (Supervisor)
Abstract
Organizations are established and developed based on a specific existence policy. They would exist as long as they are able to do their basic mission. An organization could perform its mission through some work processes. The better processes makes higher organization’s productivity. In order words desirable quality and quantity of an organization depends on processing functions. Improved processes use minimum resources to achieve efficiency maximum. Deeds and Properties Registration Org. (DPRO) is a unit, which maintains and supports national security through arranging individual social and economic relations, the organization has an outstanding position. Following composition of 20-year...