Sharif Digital Repository

In this paper, the polymer chain of rotator (PCOR) equation of state (EOS) was used together with an EOS/GE mixing rule (MHV1) and the Wilson's equation as an excess-Gibbs-energy model in the proposed approach to extend the capability and improve the accuracy of the PCOR EOS for predicting the Henry's constant of solutions containing polymers. The results of the proposed method compared with two equation of state (van der Waals and GC-Flory) and three activity coefficient models (UNIFAC, UNIFAC-FV and Entropic-FV) indicated that the PCOR EOS/Wilson's equation provided more accurate results. The interaction parameters of Wilson's equation were fitted with Henry's constant experimental data... 

Nowadays, data outsourcing has become a solution for many organizations especially large scale enterprises due to the high costs of in-house management of the rapidly growing data. Among all security requirements in this context, user access control and its following dynamic changes are of interest. In this paper, we propose an efficient and reliable mechanism to solve this problem in owner-write-users-read applications. A novel solution is introduced to enforce access control on outsourced data using the Chinese Remainder Theorem. The solution allows updating policy changes at a limited cost in terms of both computational power and the number of users' secret keys. Although the server, on... 

The separation of xylene isomers is an important application in separation processes that is based on their adsorption properties on different adsorbents. In this work, the Price and Danner method was employed with a neural network to investigate the adsorption behavior of binary systems of p-xylene/m-xylene, p-diethyl benzene/m-xylene, and p-diethyl benzene/p-xylene and the ternary system of p-diethyl benzene/m-xylene/p-xylene at 130 and 175°C. The Redlich-Kister, Wilson, and NRTL models were used to determine the activity coefficients in the adsorbed phase. Comparison with experimental data from the literature indicated that the proposed thermodynamic model would best determine surface... 

Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.% of palladium on activated carbon)... 

Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.%... 

Liquid phase hydro-purification of crude terephthalic acid (CTA) was performed using supported Pd and Pd-Sn catalysts on functionalized multi-wall carbon nanotubes (FMWCNT). Pd/FMWCNT catalysts were prepared by wet impregnation with Pd loadings of 0.05 to 0.6 wt.%. Pd-Sn/FMWCNT catalysts were prepared by co-impregnation (CI) and successive impregnation (SI) using 0.3 wt.% Pd loading and Sn/Pd molar ratios of 0.1 and 0.35 for the CI method and 0.05 to 0.35 for the SI method. Pd loading of 0.3 wt.% for Pd/FMWCNT was sufficient to decrease the 4-carboxybenzaldehyde (4-CBA) content of CTA from 2100 ppm to 5.5 ppm without excessive hydrogenation of terephthalic acid (TA). The commercial catalyst... 

Palladium nanocatalysts supported on reduced graphene oxide (rGO), multi walled carbon nanotubes (MWCNT), and rGO/CNT composite were synthesized by a wet impregnation method using PdCl2 as a precursor. Palladium loading was 0.3 wt %, and the catalysts were reduced at 300°C. The catalysts were characterized by inductively coupled plasma, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, temperatue-programmed reduction, temperatue-programmed desorption, and Raman spectroscopy. The performance of the catalysts was investigated for hydro-purification of crude terephthalic acid (CTA) containing...