Sharif Digital Repository

Here we study on-design and off-design analysis of twin spool turbofan engines and also we present scaling methods to produce the characteristics performance maps of compressors and fans. Mathematical modeling of engine performance has been performed by serial nested loops algorithm. Performance of components have been modeled by performance maps, thermodynamic snd gas dynamic equations. The working fluid supposed to be a perfect gas and the effects of water vapor existing in atmosphere are neglected. In hot and cold sections of the engine, different thermo-physical properties are used. Mathematical modeling procedure of a turbofan engine, is complex. Therefor, initially, the off-design... 

Embedded systems play an important role in many applications in various areas of human life. A large group of these systems are portable devices that have limited energy budget and therefore require considering the energy consumption in their design. Today, memories are responsible for a considerable portion of energy consumption in embedded systems, mainly because of their static leakage power consumption. Memories used in embedded systems are usually based on either SRAM (mostly used on-chip as cache or scratchpad memory) or DRAM (mostly used off-chip as main memory). The high leakage power of these memories (especially SRAM) is not negligible and hence has persuaded researchers to find... 

This researⅽh investigates the perforⅿanⅽe of epiⅾeⅿiⅽ routing، in ⅿobiⅼe soⅽiaⅼ net−works (ⅯSNs)، whiⅽh ⅿakes use of the store−ⅽarry−forwarⅾ paraⅾigⅿ for ⅽoⅿⅿuni−ⅽation. Reaⅼ−ⅼife ⅿobiⅼity traⅽes show that peopⅼe have skeweⅾ ⅼoⅽation visiting pref−erenⅽes، with soⅿe pⅼaⅽes visiteⅾfrequentⅼy anⅾ soⅿe others infrequentⅼy. In orⅾer to ⅿoⅾeⅼ epiⅾeⅿiⅽ routing in ⅯSNs، we first anaⅼyze the tiⅿe taken for a noⅾe to ⅿeet the first noⅾe beⅼonging to a set of noⅾes restriⅽteⅾ to ⅿove in a speⅽifiⅽ subarea. Af−terwarⅾs، two networks are ⅽonsiⅾereⅾ. For eaⅽh network، a ⅿonoⅼithiⅽ stoⅽhastiⅽ re−warⅾ net (SRN) is proposeⅾ to evaⅼuate the ⅾeⅼivery ⅾeⅼay anⅾ the average nuⅿber of transⅿissions unⅾer... 

This project aims to study corrosion protection performance of silane coating based on tetraethylorthosilicate (TEOS), (3-Mercaptopropyl) trimethoxysilane (MPTS) and Hexamethyldisilazane (HMDS) on carbon steel substrate. Water contact angle (WCA) were measured to study hydrophobicity. The water contact angle increased from 60 degrees in carbon steel to 134.8 degrees in the sample containing 0.35 MPTS and 1.25 HMDS. Surface morphology was studied using Field emission scanning electron microscopy (FESEM) and chemical analysis was conducted using Fourier Transform Infrared Spectroscopy (FTIR). Corrosion resistance was studied by means of Electrochemical Impedance Spectroscopy (EIS) and tafel... 

Occurrence of natural disasters such as earthquake could seriously damage most buildings especially those with insufficient resistance located in urban worn-out textures. In order to reduce unpleasant consequences of an earthquake, appropriate policies need to be considered to persuade the beneficiaries to follow retrofitting standards in the process of planning, designing, and construction of buildings. These policies shall be implemented through institutions in arbitrary or obligatory forms, by encouragement or penalty mechanisms. In order to consider these policies, first of all we need to identify the beneficiaries and their particulars. By studying and considering subjects discussed in... 

Chemotherapy is a proven and effective systematic approach to treat various types of cancers. Despite its advantages, chemotherapy would kill healthy as well as cancer cells. To overcome this problem, different controlling strategies are implemented. This study aims to provide a medicine drug delivery schedule for chemotherapy (by designing a proper controlling system) based on the verifiable mathematical models. First, the dynamic model is analysed and stability points are reviewed. The selected model has five state variables and two inputs. In this study, the focus is on dynamic model analysis and obtaining an effective and appropriate treatment pattern by designing a proper controller. To... 

Natural disasters can damage the infrastructure of society. Damages to the infrastructure components of society can disrupt their service delivery. Disruption in providing services to society's infrastructure can disrupt social and economic activities and impose various significant costs on society. The cost of repairing the damaged infrastructure and reducing the income of households are among the economic damages of accidents. The decline in the quality of life, as well as the death and injury of people due to the breakdown of the infrastructure or the disruption in their services, are among the social damages caused by accidents. In the same way, natural disasters are considered a... 

Due to the vulnerability of urban fabric and residential buildings to earthquakes and considering its destructive social and economic effects on society, the need to adopt appropriate policies to prevent and reduce vulnerability, has been increasingly considered by policy makers. Despite the laws, regulations, incentives and penalties that policymakers have envisioned to prevent unprincipled and unsafe construction, evidence shows that a significant number of new buildings being built in the country are not earthquake resistant and there are many violations in design, implementation and supervision that is done by the stakeholders. To solve this problem, research has been done on the... 

Soil and water pollution is one of the most common types of pollution in terrestrial and aquatic ecosystems. The development of mines and the oil and petrochemical industry on one hand and the non-compliance with environmental requirements on the other hand have caused large amounts of hydrocarbon pollutants and heavy metals to enter the environment in recent decades. Petroleum materials and heavy metals leak into the surrounding environment during drilling and extraction in oil sites and mines or during land and sea transportation, despite the measures taken to control their pollution. The conducted studies show that human industrial activities are the only cause of environmental pollution... 

The power control of horizontal axis wind turbines can affect significantly the vibration loads and fatigue life of the tower and the blades. In this thesis, we are going to consider both the power control and vibration load mitigation of the tower fore-aft vibration. For this purpose, at first, we developed a fully coupled model of the NREL 5MW turbine. This model considers the full aeroelastic behavior of the blades and tower and is validated by experiment results, comparing the time history data with the FAST (Fatigue, Aerodynamics, Structures, and Turbulence ) code which is developed by NREL (National Renewable Energy Lab in the United States). In the next, to estimate EWV, a novel... 

Laboratory studies to investigate the effects of different saline concentrations (such as sodium chloride or calcium chloride) on the soil water retention behavior of clayey soils and their volumetric changes have received much attention recently. However, many previous studies have investigated these effects in only one path of the SWRC (wetting or drying path) and the effects of saline concentration on hydraulic hysteresis have not been considered. In addition, researchers have frequently studied these effects on SWRC on clay samples, and little research has been done on collapsible soils. Therefore, the most important purpose of this study is to investigate the effects of increasing... 

Nowadays electricity power has a key role in developing various aspects of the world. The great importance of fossil fuel power plants come from their large contribution in electricity power generation. Among the different fossil fuel power generation technologies, supercritical power plants have great advantages. They are an advanced power generation technology with high plant efficiency, high coal utilization and low emission. Their complexity and existing many unavoidable uncertainty sources in their dynamic such as changes of ambient temperature, climate condition and wear of components make their control challenging. To overcome mentioned problems and achieving a good performance, a... 

The instability and contamination leakage through tailings dams is one of the major problems of them. These dams are usually constructed through self-consolidation with minimum compaction effort, so special attention must be given to the stability of these structures. In addition, tailings dams contain considerable amounts of metals and chemically soluble contaminants resulting from mining processes in their reservoirs, making them more likely to leak contamination from the dam's foundation and body, causing pollution downstream. The infiltration of various chemical contaminants into the soil may alter its hydraulic and resistance properties. Laboratory studies have shown that pore solution... 

In this research, the main purpose of the controller design is in the second region of operation of a wind turbine, which involves absorbing the maximum energy from the wind. WindPACT 1.5MW turbine has been investigated and the power coefficient of this turbine has been obtained using WT-PERF and FAST softwares. Simulations show that the results of both methods are well matched. Then, using ANFIS, a method for estimating the wind speed is derived from the data obtained by FAST. Inputs to the ANFIS system are the turbine aerodynamic power, rotor speed and blade pitch angle while the output of ANFIS system is the estimated wind speed. The maximum power coefficient of the wind turbine occurs... 

Power transmission lines, which are responsible for the distribution and transmission of electrical energy from the power plant to the consumer areas, due to their characteristics such as long length and flexibility with low structural damping, face environmental irritations, especially the galloping phenomenon, causing many damages annually. In this study, it has been attempted to reduce the vibrations of power transmission lines by designing a robust active control and by using intermediate actuators in such a way that the failures of these lines can be prevented. For this purpose, linear modeling of the system and designing the controller using the pole replacement method have been done....