Sharif Digital Repository

In this study, Yittria Stabilized Zirconia/Titania powders synthesized via air plasma spray (APS) method such as morphology changes and phase transformations of core-shell structure characterized. Phase analysis of powders was performed by XRD. The crystallite size and lattice strain of YSZ/TiO2 core-shell structure was calculated by Williamson-Hall method. Morphology was observed with scanning electron microscope. EDS and map analysis were used for core-shell characterization. Results revealed that all TiO2 nano particles were melted around YSZ powders with the thickness between 1 up to 5 μm. After spraying the YSZ/TiO2 mixture in water, strain values increased but crystallite size... 

Investigation of nanomachine swarm motion is useful in the design of molecular transportation systems as well as in understanding the assembly process on the surface. Here, we evaluate the motion of the clusters of nanocars on graphene surfaces, using molecular dynamics (MD) simulations. The mechanism of motion of single nanocars is evaluated by considering the rotation of the wheels, direction of the nanocars’ speed and comparing the characteristics of the surface motion of nanocars and similar absorbed molecules. The mentioned analyses reveal that, in the thermally activated surface motion of the nanocars, sliding movements are the dominant mode of motion. A coarse grained (CG) model is... 

Understanding the motion characteristics of fullerene clusters on the graphene surface is critical for designing surface manipulation systems. Toward this purpose, using the molecular dynamics method, we evaluated six clusters of fullerenes including 1, 2, 3, 5, 10, and 25 molecules on the graphene surface, in the temperature range of 25 to 500 K. First, the surface motion of clusters is studied at 200 K and lower temperatures, in which fullerenes remain as a single group. The trajectories of the motion as well as the diffusion coefficients indicate the reduction of surface mobility as a response to the increase of the fullerene number. The clusters show normal diffusion at the temperature... 

We investigate the second quantization form of the entanglement Hamiltonian (EH) of various subregions for the ground state of several interacting lattice fermions and spin models. The relation between the EH and the model Hamiltonian itself is an unsolved problem for the ground state of generic local Hamiltonians. In this paper, we demonstrate that the EH is practically local and its dominant components are related to the terms present in the model Hamiltonian up to a smooth spatially varying temperature even for (a) discrete lattice systems, (b) systems with no emergent conformal or Lorentz symmetry, and (c) subsystems with nonflat boundaries, up to relatively strong interactions. We show... 

Effect of Al2O3 nanoparticles (80 nm) on the grain structure and phase formation in Ni-50Ti system during high-energy mechanical alloying (MA) was studied. While the formation of NiTi B2 phase occurs progressively during MA, it is shown that the hard inclusions cause abrupt phase formation at short milling times, particularly at higher nano-Al2O3 contents. High-resolution transmission electron microscopy showed significant grain refinement in the presence of alumina nanoparticles to sizes less than 10 nm, which precedes the formation of semicrystalline structure and reduces the diffusion length and thus accelerates the phase formation. The composite powder reached steady-state MA condition... 

Titanium dioxide is a cheap, chemically stable and non-toxic material. However its photocatalytic properties are unstable and it is a modest semiconductor and a mediocre insulator. For several applications it would be interesting to make it either more insulating or more conducting. The goal of this work was to modify the photocatalytic properties of nano-crystalline TiO2 powders by wet chemical routes and hydrothermal methods to understand the mechanism leading to these modifications The principal factors that influence the photocatalytic properties are on the one hand the concentration and nature of the chemical and physical conditions in TiO2, and on the other hand the morphology of the... 

Given a simple polygon P with n vertices, the visibility polygon (V P) of a point q (V P(q)), or a segment (formula present) (V P(pq)) inside P can be computed in linear time. We propose a linear time algorithm to extend V P of a viewer (point or segment), by converting some edges of P into mirrors, such that a given non-visible segment (formula present) can also be seen from the viewer. Various definitions for the visibility of a segment, such as weak, strong, or complete visibility are considered. Our algorithm finds every edge such that, when converted to a mirror, makes (formula present) visible to our viewer. We find out exactly which interval of (formula present) becomes visible, by... 

Given a simple polygon P with n vertices, the visibility polygon (VP) of a point q, or a segment pq‾ inside P can be computed in linear time. We propose a linear time algorithm to extend the VP of a viewer (point or segment), by converting some edges of P into mirrors, such that a given non-visible segment uw‾ can also be seen from the viewer. Various definitions for the visibility of a segment, such as weak, strong, or complete visibility are considered. Our algorithm finds every edge that, when converted to a mirror, makes uw‾ visible to our viewer. We find out exactly which interval of uw‾ becomes visible, by every edge middling as a mirror, all in linear time. In other words, in this... 

The phase diagram of the strongly correlated Hubbard model with intrinsic spin-orbit coupling on the honeycomb lattice is explored here. We obtain the low-energy effective model describing the spin degree of freedom. The resulting model is then studied by the Schwinger boson and Schwinger fermion approaches. The Schwinger boson method elucidates the boundary between the spin liquid phase and the magnetically ordered phases, Neel order, and incommensurate Neel order. Increasing the strength of the spin-orbit coupling is shown to narrow the width of the spin liquid region. The Schwinger fermion approach sheds further light on the nature of the spin liquid phase. We obtained three different... 

The aim of the present study was to experimentally investigate the interaction between a low replacement ratio of different nano-particles (SiO2, Al2O3, clay, and CaCO3) and aminosilane in the matrices of cement paste and mortar. Results showed that the optimum content of aminosilane for improving the 28-day compressive strength of cement mortar was 0.75% (by weight of the total binder). The utilization of nano-SiO2 and nano-clay particles improved the strengths of the cement mortar containing hybrid systems of nano-particles/aminosilane at early (7 days) and middle curing ages (28 and 91 days). The 28-day compressive strength enhancement of cement mortar with hybrid systems of nano-SiO... 

While many-body effects in flat-band systems are receiving renewed hot interest in condensed-matter physics for superconducting and topological properties as well as for magnetism, studies have primarily been restricted to multiband systems (with coexisting flat and dispersive bands). Here we focus on one-band systems where a band is "partially flat," comprising flat and dispersive portions in k space to reveal whether intriguing correlation effects can already arise on the simplest possible one-band level. For that, the two-dimensional repulsive Hubbard model is studied for two models having different flat areas in an intermediate-coupling regime with the dynamical mean-field theory... 

It has been found that the high wear resistance of NiTi alloy is mainly attributed to its pseudoelasticity which is only effective within a small temperature range. It is believed that pseudoelasticity becomes ineffective by applying high-load wear condition which yields plastic deformation and temperature increment during wear test. Therefore, the enhanced wear resistance can be obtained from the improvement of mechanical property of the alloy without much reduction of pseudoelasticity. In this study, a low weight percentage of hard Al2O3 nanoparticles were added to NiTi atomized powders. The resultant powder mixture was homogenized by ball milling and sintered in a vacuum furnace in order... 

Effect of Al2O3 nanoparticles (80 nm) on the grain structure and phase formation in Ni-50Ti system during high-energy mechanical alloying (MA) was studied. While the formation of NiTi B2 phase occurs progressively during MA, it is shown that the hard inclusions cause abrupt phase formation at short milling times, particularly at higher nano-Al 2O3 contents. High-resolution transmission electron microscopy showed significant grain refinement in the presence of alumina nanoparticles to sizes less than 10 nm, which precedes the formation of semicrystalline structure and reduces the diffusion length and thus accelerates the phase formation. The composite powder reached steady-state MA condition... 

Zinc oxide thin films were deposited on soda-lime glass substrates from an aqueous zinc- containing complex by two-stage chemical deposition (TSCD) method. Longmuir adsorption model showed that the adsorption of atoms on the surface of the substrate was typically physical. The relation between the fractional coverage, θ, with the equilibrium constant of the adsorption reaction was nonlinear indicating that the adsorption was non-ideal. The percentage of porosity, 1-θ, of the thin layer was determined as a function of Zn 2+ concentration of the solution. By application of XRD technique, it was shown that pure crystalline ZnO of controllable thickness could be deposited by TSCD method on the... 

Fabrication of high quality zinc oxide thin films and analysis on its physical, chemical properties have applications in opto-electronic devices, UV laser, microelectronics and micro-machining schemes. Highly textured ZnO thin film with a preferred (0 0 2) orientation was prepared by two-stage chemical deposition (TSCD) using an aqueous solution containing zinc complex on a soda-lime glass substrate. From the results obtained, it can be shown that the preferred orientations of the film microcrystal changes with the doping process. The film was characterized by X-ray diffraction (XRD), SEM, EDAX, optical technique, Fourier transform infrared spectroscopy (FTIR) in order to qualify its... 

Zinc oxide is used in functional devices, catalysts, pigments, optical materials and many other important applications. ZnO nanopowders can be produced mechanochemically or solochemically. The synthesis of ZnO nanopowder has been carried out via solochemical processing from an aqueous solution of a zinc containing complex in this research. This is the newest economic method for synthesis of ZnO nanopowder. The results obtained from XRD and TEM show that the nanoparticles are single crystals and the mean particle size is 45.3 nm. TEM micrographs of ZnO nanopowder reveal that the particles have elongated particulate shape with a narrow size distribution. Solochemical processing can thus be an... 

Two-stage chemical deposition (TSCD) technique is used to produce ZnO, Mn2O3 and NiO films on soda-lime glass (SL-G) from an aqueous solution of zinc, manganese and nickel complex, respectively. The TSCD method enables the deposition of metal oxide thin films with a thickness which can be controlled during the preparation procedure. The ZnO, Mn 2O3 and NiO thin films were polycrystalline films which were adherent well to the substrates. The SEM micrographs clearly indicate that the zinc oxide layer is composed of oval shaped crystallites preferably orientated perpendicular to the surface of the substrate. The Mn 2O3 and NiO layers were closely packed on the substrate. These particles seem to... 

A two stage chemical deposition (TSCD) technique is used to produce ZnO films on quartz glass (QG), soda lime glass (SLG) and high purity alumina (HPA) from an aqueous solution of zinc complex. The effects of the substrate material on the chemical composition and morphology of the deposited layer are investigated. The effects of different annealing temperatures (180, 300, 500 and 800°C) on the morphology and orientation of the ZnO crystallites are also determined. X-ray diffraction diffractograms show that above 300°C, the intensity of (002) peak considerably decreases with increasing temperature. Results indicate that changing the substrate from QG to SLG does not significantly influence... 

The microstructure and phase transformational behavior of NiTi-based composites reinforced with 6 wt.% of α-alumina nanoparticles have been investigated. Two kinds of starting materials, elemental Ni–Ti and prealloyed austenitic NiTi, were used to prepare the composites. The samples were consolidated using a hot isostatic pressing method. The X-ray diffraction results showed that while unreinforced NiTi mainly contained B2 phase at room temperature, martensitic B19′ phase appeared in the microstructure after addition of the α-alumina nanoparticles. The differential scanning calorimetry measurements indicated that the martensitic transformation temperatures were elevated in the composite... 

For many years, it has been a significant concern for nanoscience researchers to synthesize nanomachines with steerable motion. Despite the notable number of studies on the motion of nanocars on a surface, the motion characteristics of carbon nanotubes received less attention. Remarkable features such as symmetry, strength, and stiffness made carbon nanotubes (CNTs) a proper option as wheels in the nanocars. In this paper, for the first time, the motion of carbon nanotube on a gold substrate and its advantages over previous wheels such as fullerene and p-carborane are investigated. We demonstrate that contrary to the other wheels, CNT moves in a directed path, making them an ideal option as...