Sharif Digital Repository

In this paper, proper and safe planning of excavation method and design of support system in very weak rocks with case study of control room of Silveh dam are discussed. Silveh earth-storage dam, with 102 m height; is under construction in North-West of Iran. Due to numerous and various tectonic occurrences, the area of dam site is known as a high activity zone of Iran. In purposed location of control room, bedrock contains mostly weathered and crushed Shale and Schist. 60 m overburden and finite aquifers are another specific concern of this project. In this paper by using 3D finite element modeling, different stages of excavation and support system installation have been analyzed for the... 

Magnetite nanoparticles with an average particle size of 28.8 nm were synthesized, coated with oleic acid, and characterized using various techniques such as DLS, FT-IR, SEM, XRD, VSM, and UV-Vis analysis. A nanofluid consisting of synthesized nanoparticles and 5 wt % acetic acid in toluene as the dispersed phase was prepared and used in the chemical test system, Toluene-Acetic Acid-Water, for the single drop extraction in the presence and absence of an external oscillating magnetic field. Influences of various operating and design parameters such as nanoparticle concentration, drop diameter, and the applied current and frequency on the overall mass-transfer coefficients for the... 

TiO2 layers were grown via pulse type microarc oxidation process under different applied voltages, frequencies, and duty cycles. Surface chemical composition and phase structure of the synthesized layers were studied utilizing X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Furthermore, scanning electron microscope (SEM) and atomic force microscope (AFM) were employed to investigate surface morphology and topography of the layers. It was revealed that the layers had a porous structure with both anatase and rutile phases. The anatase relative content in the layers increased with the applied frequency; meanwhile, it decreased with duty cycle at low applied voltages, but... 

Ground-coupled ejector cooling (GCEC) systems have been introduced to solve the air-coupled ejector cooling (ACEC) systems problems. To date, no research study is dedicated to compare the GCEC and the ACEC systems and determine the relative payback period of the GCEC system vs. the ACEC system. Furthermore, almost all the previous studies simulated the GCEC systems by elementary models. Therefore, a comprehensive simulation is conducted to assess the techno-economic performance of a GCEC system. The model consists of the ejector and the borehole heat exchanger submodels. The first section of the results compares the ACEC system and the GCEC system during a cooling season. The seasonal... 

In Iran, due to arid and semi-arid climate, groundwater resources play an essential role in food production, as well as domestic and industrial water supply. In recent years, increasing population, scarcity of surface water resources, and effects of worldwide and regional climate change have resulted in over-exploitation and unsustainability of these resources in the country. The present study aims to estimate groundwater sustainable yield, examine effects of spatial and temporal scale, and propose a plan for groundwater sustainable use in Nishapur Plain, in the north-east of Iran. In investigating the effects of spatial scale, the area of the plain is divided into several zones, with... 

Two-step sintering (TSS) was applied on nanocrystalline yttria tetragonal stabilized zirconia (3Y-TZP) to control the grain growth during the final stage of sintering. The process involves firing at a high temperature (T1) followed by rapid cooling to a lower temperature (T2) and soaking for a prolonged time (t). It is shown that for nanocrystalline 3Y-TZP (27 nm) the optimum processing condition is T1 = 1300 °C, T2 = 1150 °C and t = 30 h. Firing at T1 for 1 min yields 0.83 fractional density and renders pores unstable, leading to further densification at the lower temperature (T2) without remarkable grain growth. Consequently, full density zirconia ceramic with an average grain size of 110... 

S-doped TiO2 layers were grown on titanium substrates by MAO process. SEM results revealed a porous morphology with a pore size of 40-100 nm. Our XRD analysis showed that the anatase relative content reached its maximum value at the voltage of 500 V. The existence of sulfur in the states of S 4+ and S6+ which substituted Ti4+ in the titania crystalline lattice was confirmed by XPS results; meanwhile, no S 2- was detected. That is, a cationic doping was observed. EDS results showed that sulfur concentration in the layers increased with the voltage. The band gap energy was also calculated as 2.29 eV employing a UV-Vis spectrophotometer  

We study a new contraction of a d+1 dimensional relativistic conformal algebra where n+1 directions remain unchanged. For n = 0,1 the resultant algebras admit infinite dimensional extension containing one and two copies of Virasoro algebra, respectively. For 1$">n>1 the obtained algebra is finite dimensional containing an so(2,n+1) subalgebra. The gravity dual is provided by taking a Newton-Cartan like limit of the Einstein's equations of AdS space which singles out an AdS n+2 spacetime. The infinite dimensional extension of n = 0,1 cases may be understood from the fact that the dual gravities contain AdS 2 and AdS 3 factor, respectively. We also explore how the AdS/CFT correspondence works... 

Synthetic aperture radar (SAR) systems are so popular in aerial imaging because of their high resolution. Ground moving target indication (GMTI) is one of the most challenging problems in this field. The use of multiple antennas in transmit and receive is an innovative idea that can overcome the limitations of SAR systems. In this paper, after modelling the received signal and focusing it, we propose an algorithm for GMTI with the use of compressed sensing. The proposed algorithm has low complexity compared to similar algorithms. Simulation results show that this approach is accurate in estimation of positions and velocities of moving targets. © 2018 IEEE  

WO3-TiO2 nano porous layers were synthesized by micro arc oxidation (MAO) process under different applied voltages in electrolytes containing sodium tungstate and phosphate salts with various concentrations. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectroscopy (EDS) techniques were employed to study phase structure and chemical composition of the layers. According to our data analysis, the nano porous layers consisted of anatase, rutile, and tungsten oxide phases with a varying fraction depending on the voltage and electrolyte concentration. Moreover, it was found that WO3 not only dispersed in the TiO2 matrix, but also doped into the TiO2... 

Sulfur doped TiO2 layers containing nano/micro-sized pores were synthesized by micro-arc oxidation process. Effect of the applied voltage and the electrolyte composition on physical and chemical properties of the layers was investigated using SEM, AFM, XRD, XPS, and EDS techniques. A UV-vis spectrophotometer was also used to study optical properties of the layers. It was found that the doped layers were porous with a pore size of 40-170 nm. They consisted of anatase and rutile phases with varying fraction depending on the applied voltage and electrolyte concentration. Our XPS investigations revealed the existence of sulfur in the forms of S4+ and S6+ states which substituted Ti4+ in the... 

V2O5-TiO2 layers with a sheet-like morphology were synthesized by micro arc oxidation process for the first time. Surface morphology and topography of the layers were investigated by scanning electron microscope (SEM) and atomic force microscope (AFM). Phase structure and chemical composition of the layers were also studied by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques. It was revealed that the composite layers had a sheet-like structure average thickness of which was about 100 nm depending on the applied voltage. The layers consisted of anatase, rutile, and vanadium pentoxide phases fractions of which varied with the applied voltage. The optical properties... 

V2O5-TiO2 porous layers were synthesized via micro-arc oxidation for the first time. The effect of the applied voltage on morphology, composition, and photo-activity of the layers was investigated. The layers, which consisted of anatase, rutile, and vanadium pentoxide phases, revealed an enhanced photo-activity. About 93% of methylene blue solution was degraded on the synthesized layers after 120 min UV-irradiation with a reaction rate constant of k = 0.0228 min-1. The band gap energies of the vanadia-titania and pure titania layers were calculated as 2.56 and 3.39 eV, respectively  

In this research, the effect of applied voltage and electrolyte concentration on structure, chemical composition, optical properties, and especially photo-catalytic activity of the TiO2 layers containing micro/nano-sized pores are discussed. TiO2 layers were synthesized by micro arc oxidation (MAO) process using different electrolyte concentrations and applied voltages. Surface structure of the layers was studied by scanning electron microscope (SEM); furthermore, energy dispersive spectrophotometry (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques were employed to determine phase structure and chemical composition of the layers. Photo-activity of the...