Sharif Digital Repository

To get a more accurate model for simulation of single electron transistors (SETs), we have proposed a new macromodel that includes the ability of electron tunneling time calculation. In our proposed model, we have modified the previous models and applied some basic corrections to their formulas. In addition, we have added a switched capacitor circuit, as a quantizer, to calculate the electron tunneling time. We used HSPICE for high-speed simulation and observed that the simulation results obtained from our model matched more closely with that of SIMON 2.0. We also could evaluate the time of electron tunneling through the barrier by using the quantizer. Clearly, our macro-model gives more... 

To get a more accurate model for the simulation of single electron transistors (SETs), we propose a new macro-model that includes an electron tunneling time calculation. In our proposed model, we have modified the previous models and have applied some basic corrections to the formulas. In addition, we have added a switched capacitor circuit, as a quantizer, to calculate the electron tunneling time. We used HSPICE for a high-speed simulation and observed that the simulation results obtained from our model match more closely with that of SIMON 2.0. We also could evaluate the time of electron tunneling through the barrier by using the quantizer. Clearly, our macro-model gives more accurate... 

In this paper, a novel classification approach is presented. This approach uses fuzzy if-then rules for classification task and employs a hybrid optimization method to improve the accuracy and comprehensibility of obtained outcome. The mentioned optimization method has been formulated by simulated annealing and genetic algorithm. In fact, the genetic operators have been used as perturb functions at the core of simulated annealing heuristic. Results of proposed approach have been compared with several well-known methods such as Naïve Bayes, Support Vector Machine, Decision Tree, k-NN, and GBML, and show that our method performs the classification task as well as other famous algorithms. ©... 

Intrusion detection systems (IDS) are tools located inside computer networks that analyze the network traffics. In this paper, a novel fuzzy-evolutionary system is presented to effectively detect the intrusion in computer networks. This system utilizes a hybridization of simulated annealing heuristic and tabu search algorithm to improve the accuracy of fuzzy if-then rules as intrusion detectors. Each of these algorithms has its advantageous and disadvantageous. Using the hybrid model of both algorithms, the proposed system employs the good features of them to improve the accuracy of obtained rules. Evaluation of the proposed system is done on the KDDCup99 Dataset which has information about... 

Bond durability of FRP bars and concrete is an important issue to the overall integrity and long-term performance of a strengthening structure. This paper examines the bond durability of GFRP bars embedded in different types of concrete (Normal, self-compacting, light weight, and high strength) exposed to aggressive environments, namely, sea water, alkaline, and acid. A total of 132 specimens were tested in direct pull-out. The development lengths of both control and conditioned specimens were obtained and compared to the current standards. The results revealed bond strength reductions of 0–21% for the light weight, 1–16% for the normal, 5–9% for the high strength, and 4–12% for the... 

The bond of fiber-reinforced polymer (FRP) reinforcement is expected to be more sensitive to the strength and geometry of the ribs than conventional steel reinforcement. In this study, the effect of carbon fiber mat anchorage on the pullout behavior of glass fiber-reinforced polymer (GFRP) bars embedded in normal concrete is studied. The studied parameters were the compressive strength of the concrete (16 MPa, 24 MPa, and 37 MPa), and, the length and diameter of the anchorage. In total, 15 variables were studied. Ribbed GFRP bars with 10 mm nominal diameter and 80 mm embedment length, ld, (which is 8 times the bar diameter) were considered. Based on the results for concretes with the... 

This paper experimentally investigates the effects of seawater on pull-out behavior of single rods glued in timber parallel to grain. Considering different rod diameters (6, 8, 10 mm), slenderness ratios (7.5, 10, 15), rebar materials (steel and GFRP), and immersion time in seawater (0, 10, 20, 30, 60, 90 days), 324 specimens were tested. Mean strength reduction about 39 and 55 percent was observed for 90-day immersed joints constructed with GFRP and steel rebars, respectively. Rebar diameter and slenderness ratio significantly influenced ultimate loads, and dominant failure mode was at adhesive/timber interface. Finally, two novel strength models were developed empirically. © 2019 Elsevier... 

In this paper, a systematic investigation and modeling of all available technologies (such as NGL, injection in pipelines, LNG, GTL, NGH, and CNG plants, EOR, electricity production by thermal power plants, and water generation by MED technologies) for flare gas recovery has been developed. An optimal combination of the technologies has been proposed for flare gas recovery of five oil wells in the south of Iran with different specifications as case studies. The optimal combinations of all the technologies have been investigated with minimizing the payback period of capital costs (economical) and maximizing CO2 pollutant reduction (environmental) objective functions by using the genetic... 

One of the most essential and costly stages in Concrete Face Rockfill Dams (CFRD) construction is to implement the concrete at the upstream face of the dam without joints. As the face concrete is considered as the most integral part to prevent water penetration in CFRDs, it's quality control is of paramount importance. One of the conventional approaches for quality control of the concrete which is used in CFRD is the compressive strength of laboratory samples. The comparison of laboratory and in situ measurements provides information about the accuracy of the obtained results. This research investigates the correlation of concrete compressive strength determined by using different methods in... 

Microfluidic experiments have found wide applications in medical sciences and engineering, such as cell separation and focusing. In the present study, focusing and separation of particles with different sizes and densities were investigated by designing inertial microfluidic devices. The microfluidic channel is designed by analyzing the induced forces on the particles. In the designing process, the objective was to focus and separate the particles in the shortest length of the channel with the lowest possible cycles and high efficiency. The simulation is then used for analyzing the two proposed geometries to evaluate their particle separation and focusing ability, named convergent and... 

This work deals with waste heat recovery from a proposed direct internal reforming molten carbonate fuel cell (DIR-MCFC), including an integrated pre-reformer. In this regard, some advantages are attainable over exhaust gas recycling. For instance, due to low temperature in the pre-reformer, carbon deposition and coke formation resulting from higher hydrocarbons can be eliminated. In this study, the cathode outlet provides the heat requirement for the pre-reforming process. After partial heat recovery from the cathode outlet, the stream still has a considerable energy and exergy (352.55 °C and 83.687 kW respectively). This study investigates waste heat recovery from the proposed DIR-MCFC,... 

This study presents a passive model to detect islanding conditions of synchronous distributed generation resources in a distribution network or a microgrid. The proposed approach uses the classification and regression tree algorithm for distinguishing between islanding and non-islanding situations. It utilises the rate of change of frequency (ROCOF) and harmonic content of the equivalent reactance seen at the location of distributed generation as input features for decision tree construction. Indeed the thresholds of the proposed input features are extracted by the decision tree algorithm. The output if-then rules of the decision tree algorithm are then utilised to make a new relay logic for... 

This paper presents the results of diagonal compression tests conducted on a series of un-reinforced and reinforced masonry specimens. Reinforced specimens were strengthened by using three types of mortar coating (with and without inner reinforcement), mesh reinforcement, and PP-band reinforcement. In particular, four different reinforcement methods with mortar coating (bare mortar coating, coating with steel mesh, coating with polymer reinforcement, and coating with GFRP mesh reinforcement), three different mesh-only reinforcement (steel mesh, polymer mesh with larger grids, and polymer mesh with smaller grids), and 2 different arrangements of PP-bands (4 × 4 and 6 × 6) were tested. Also,... 

In this experimental study the effect of physical and thermal properties of various FRP bars on their performance under elevated temperatures are investigated. The parameters included the bars' diameter, type of fiber, type of resin, fiber to matrix ratio, and thermal properties were studied. Moreover, ANOVA (ANalysis Of VAriance) was performed in order to investigate the contribution of each variable on the obtained results. The results showed that in addition to the temperature, the bars' diameter, type of fiber, type of resin, and thermal properties (Tg and Td) of the FRP bars have contributions to the results, while the fiber to matrix ratio was found to be an ineffective factor. It was... 

This paper presents the results of an experimental study of structural lightweight concrete with glass fiber reinforcement (GFRP) bar for prefabricated single footing. In this study, seven full scale concrete single footings specimens, which were reinforced by GFRP bar located on a bed of soil, were tested. One of the specimens was made of normal weight concrete and the others were made of structural lightweight concrete. Four of the lightweight footing specimens contained polymer fibers. Also, two of the lightweight footing specimens contained shear reinforcement. Results indicated that the maximum GFRP strain on normal weight and lightweight concrete footing with polypropylene fibers are... 

This paper presents the creep behavior of various FRP (GFRP, CFRP, and hybrid) bars in order to investigate the effects of different parameters, including the applied stress levels, bar diameter, and the type of fiber and resin in the creep behavior of FRP bars. The creep strains versus time curves were experimentally obtained for 83 days. Moreover, a statistical study, including analysis of variance (ANOVA) and linear Bayesian regression was conducted to investigate the contribution of the studied parameters. The results showed that in GFRP bars the ratio of ultimate creep strain to the initial elastic strain decreased when the applied stresses on the bars exceeded 30% of their ultimate... 

In this study, the effects of fiber type (i.e., carbon and glass fibers) and intumescent paint on the tensile performance of fiber reinforced polymer (FRP) sheets at elevated temperatures are investigated. For this purpose, a series of tensile tests were conducted on the glass and carbon fiber reinforced polymer (GFRP and CFRP) sheets, with and without intumescent fire retardant paint, at different elevated temperatures. The studied temperatures ranged from 25 °C to 600 °C. Scanning electron microscopy was also used to examine the effects of elevated temperatures on FRP sheets and the fire protecting mechanism of the intumescent paint. Based on the test results, the tensile strength of the... 

This paper investigates the influence of intumescent paint on the performance of FRP bars subjected to low (25–450 °C) and severe (450–800 °C) elevated temperatures. In this research, glass and carbon FRP bars with epoxy resin and coated with nitrogen-based intumescent paint were used. In addition to the temperature effects, a variety of FRP bar diameters were employed to determine its effect on the tensile behavior of FRP bars in the presence of intumescent paint. Further, Bayesian regression methods and ANOVA (ANalysis Of VAriance) were applied on the results to develop a predictive model form and quantify the contribution of the variables in the tensile performance of FRP bars,...