Loading...
Search for:
yadollahi--ali
0.23 seconds
Total 2473 records
Study on Immobilization of the Spent Ion Exchange Resins of Tehran Research Reactor in Borosilicate Glass
, M.Sc. Thesis Sharif University of Technology ; Samadfam, Mohammad (Supervisor) ; Yadollahi, Ali (Supervisor) ; Sepehrian, Hamid (Co-Supervisor)
Abstract
Considering the operation of the current nuclear reactors and the country's policy to achieve 10,000 megawatts of nuclear power in the horizon of 1420, as well as the construction of research reactors, we will face a huge amount of radioactive waste in the coming years. Meanwhile, spent ion exchange resins constitute a large amount of low and intermediate level (LILW) solid radioactive waste produced from the nuclear industry. Therefore, appropriate precautionary measures should be taken for the immobilization and disposal of these radioactive wastes in order to ensure the sustainable development of the nuclear industry and the protection of the environment and human health. In this study,...
Immobilization of Concentrated Radioactive Waste from Bushehr Nuclear Power Plant in Glass Matrix
, M.Sc. Thesis Sharif University of Technology ; Samadfam, Mohammad (Supervisor) ; Sepehrian, Hamid (Supervisor) ; Yadollahi, Ali (Co-Supervisor)
Abstract
Considering the operation of the current nuclear reactors and the country's policy to achieve 10,000 megawatts of nuclear power in the horizon of 1420, in the coming years we will face a huge amount of radioactive waste, the majority of which is waste with low and intermediate levels of radioactivity (LILW). A large percentage of the radioactive waste production in Bushehr power plant is concentrated waste with a low and intermediate level of radioactivity (about 70% by volume). Due to the commisining of phase 2 and 3 of Bushehr power plant in the coming years and the increase in the radioactive waste production, proper planning should be done for waste management in order to reduce the...
Study on Chemical Durability of Vitrified High Level Waste in Borosilicate Glass Matrix
, M.Sc. Thesis Sharif University of Technology ; Samadfam, Mohammad (Supervisor) ; Sepehrian, Hamid (Supervisor) ; Yadollahi, Ali (Co-Supervisor)
Abstract
As nuclear energy continues to be used as a useful energy resource, waste management, especially management of high-level nuclear waste (HLW), will always be a major concern, as the future generations should not be deprived of the valuable benefits of this energy. Vitrification of liquid high-level radioactive waste (HLW) has received greater attention, worldwide, than any other high-level waste solidification process. The high solubility of HLW in borosilicate glass, the controllable temperature of this type of glass and its low leaching rate in repository environment, have introduced borosilicate glass as a suitable host for HLW immobilization. In this project, the immobilization of the...
Robust respiratory flow estimation using statistical properties of tracheal sounds
, Article 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, Shanghai, 1 September 2005 through 4 September 2005 ; Volume 7 VOLS , 2005 , Pages 4220-4223 ; 05891019 (ISSN); 0780387406 (ISBN); 9780780387409 (ISBN) ; Moussavi, Z ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2005
Abstract
For any respiratory sound analysis or assessment, respiratory flow must also be measured simultaneously with the sounds. However, due to difficulties and/or inaccuracy of the most flow measurement techniques, several researchers have attempted to estimate flow from respiratory sounds. However, all of the proposed methods heavily depend on the availability of different rates of flow for calibration of the model, which makes their use limited by a large degree. In this paper, a robust and novel method for estimating flow using entropy of the band pass filtered tracheal sounds is proposed. The proposed method is independent of the flow rate chosen for calibration; it requires only one breath...
Robust respiratory flow estimation using statistical properties of tracheal sounds
, Article 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, Shanghai, 1 September 2005 through 4 September 2005 ; Volume 7 VOLS , 2005 , Pages 1106-1109 ; 05891019 (ISSN); 0780387406 (ISBN); 9780780387409 (ISBN) ; Moussavi, Z ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2005
Abstract
For any respiratory sound analysis or assessment, respiratory flow must also be measured simultaneously with the sounds. However, due to difficulties and/or inaccuracy of the most flow measurement techniques, several researchers have attempted to estimate flow from respiratory sounds. However, all of the proposed methods heavily depend on the availability of different rates of flow for calibration of the model, which makes their use limited by a large degree. In this paper, a robust and novel method for estimating flow using entropy of the band pass filtered tracheal sounds is proposed. The proposed method is independent of the flow rate chosen for calibration; it requires only one breath...
Measuring minimum critical flow for normal breath sounds
, Article 2005 27th Annual International Conference of the Engineering in Medicine and Biology Society, IEEE-EMBS 2005, Shanghai, 1 September 2005 through 4 September 2005 ; Volume 7 VOLS , 2005 , Pages 2726-2729 ; 05891019 (ISSN); 0780387406 (ISBN); 9780780387409 (ISBN) ; Moussavi, Z ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2005
Abstract
Relationship between respiratory sounds and flow has always been of interest for researchers and physicians. However, the flow-sound relationship at very low flow rate has been questionable because breath sounds must exceed a minimum flow in order to be audible and different from the background noise. This study aimed to find the minimum critical flow rates for respiratory sounds to be audible and different from background noise. Tracheal and lung sound signals of healthy subjects in two groups of adults (12 subjects) and children (9 subjects) were studied. The values of minimum critical flow were determined comparing the spectrogram of the respiratory sounds at very low flow with that of...
Stable operation of grid connected Cascaded H-Bridge inverter under unbalanced insolation conditions
, Article 2013 3rd International Conference on Electric Power and Energy Conversion Systems, EPECS 2013 2013 ; 2013 ; 9781479906888 (ISBN) ; Javadian, V ; Iman Eini, H ; Yadollahi, M ; Sharif University of Technology
2013
Abstract
This paper presents a single-phase Cascaded H-Bridge (CHB) inverter for photovoltaic applications. The proposed control strategy permits the optimum control of each string of PV panels in different insolation conditions. Based on the presented mathematical analysis, an analytic constraint is derived to check the stable operation of the inverter. A modified MPPT control strategy is also proposed based on this new condition. This strategy enhances the stability margins of the system by changing the operating point of some PV arrays. In this approach, the extracted power from high power cell is reduced to prevent instability issue and to avoid injection of highly distorted current into the...
Persian word embedding evaluation benchmarks
, Article 26th Iranian Conference on Electrical Engineering, ICEE 2018, 8 May 2018 through 10 May 2018 ; 2018 , Pages 1583-1588 ; 9781538649169 (ISBN) ; Bokaei, M. H ; Shoeleh, F ; Yadollahi, M. M ; Doostmohammadi, E ; Farhoodi, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2018
Abstract
Recently, there has been renewed interest in semantic word representation also called word embedding, in a wide variety of natural language processing tasks requiring sophisticated semantic and syntactic information. The quality of word embedding methods is usually evaluated based on English language benchmarks. Nevertheless, only a few studies analyze word embedding for low resource languages such as Persian. In this paper, we perform such an extensive word embedding evaluation in Persian language based on a set of lexical semantics tasks named analogy, concept categorization, and word semantic relatedness. For these evaluation tasks, we provide three benchmark data sets to show the...
Technical English for mechanical engineers
, Book ; Meghdari,Ali
Sharif University Press
2014
Abstract
Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...
Feedback control of the neuro-musculoskeletal system in a forward dynamics simulation of stair locomotion [electronic resource]
, Article Proc. of IMechE Part H: Journal of Engineering in Medicine ; 2009, Vol. 223, No. 6, pp. 663-675 Journal of NeuroEngineering and Rehabilitation ; Volume 11, Issue 1, 30 April 2014, Article number 78 ; Meghdari, Ali ; Vossough, Gholam Reza ; Sharif University of Technology
Abstract
The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of...
Design and Construction of a Soft Actuated Exoskeleton for Hand Rehabilitation of Stroke Patients
, M.Sc. Thesis Sharif University of Technology ; Ghafari, Ali (Supervisor) ; Meghdari, Ali (Supervisor)
Abstract
The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to...
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
Earthquake Branch
, M.Sc. Thesis Sharif University of Technology ; Bakhshi, Ali (Supervisor)
Abstract
In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...
Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions [electronic resource]
, Article Journal of Chemical Research ; Volume 2002, Number 8, 1 August 2002, pp. 378-380(3) ; Bagheri Marandi, Gholam
Abstract
Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions
Selective preparation of fluorescent 1,8-naphthalimides using acidic alumina under microwave irradiation [electronic resource]
, Article Journal of Chemical Research ; 01/2001; 2001(11):485-487 ; Bagheri Marandi, Gholam
Abstract
7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation
Comparison between Performance of Stone Columns and RAPs from the Bearing Capacity and Settlement Reduction Viewpoints
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor)
Abstract
Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of...
Performance of Partially Filled Mini-Channels with Porous Media
, M.Sc. Thesis Sharif University of Technology ; Nouri, Ali (Supervisor) ; Moosavi, Ali (Co-Advisor)
Abstract
Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the...
Improvement of Stability of Haptic Force Interaction with Virtual Environments Using a Haptic Interface with a Separate Tracker
, M.Sc. Thesis Sharif University of Technology ; Meghdari, Ali (Supervisor) ; Nahvi, Ali (Supervisor)
Abstract
In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new...
Simulation of the Biomolecule Imaging and Manipulation Via AFM by Molecular Dynamics Method
, M.Sc. Thesis Sharif University of Technology ; Meghdari, Ali (Supervisor) ; Moosavi, Ali (Supervisor)
Abstract
In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact...
Characterzing Variation of Small Strain Shear Modulus of Unsaturated Sand During Hydraulic Hysteresis with Bender Elements
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor) ; Khosravi, Ali (Supervisor)
Abstract
Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during...