Sharif Digital Repository

Feature vector extraction, based on local image texture, is a primitive algorithm for many other applications, like segmentation, clustering and identification. If these feature vectors are a good match to the human visual system (HVS), we can expect to get the appropriate results by using them. Gabor filters has been used for this purpose successfully. In this paper we introduce a novel refinement, with the use of Matching Pursuit (MP) to improve the Gabor based texture feature extractor. With this improvement, we show that the separability of different textures will increase. Another consideration in this work is computation complexity. Therefore, we limit the basis function set to reduce... 

The present paper studies the failure of concrete from the mesoscopic point of view. Biphasic cubic concrete samples containing spherical aggregates embedded in a homogenized mortar have been simulated using standard finite element method. Linear elasticity and damage-plasticity hypotheses are considered for the aggregates and mortar, respectively. Various triaxial loading conditions are assumed for each sample to generate adequate discrete failure points within the stress space. In the next step, the approximated failure surfaces of specimens are constructed using the Delaunay triangulation technique. The effects of mesostructural features such as aggregate grading curve, aggregate... 

This paper presents the design and implementation of a bidirectional distributed amplifier (BDDA) in a 0.18- boldsymbol mu ext{m} CMOS process. The performance of the BDDA is theoretically analyzed, and the optimum number of gain stages ( n-{ ext {opt}} ), maximum achievable power gain ( G-{P} ), and circuit bandwidth are formulated. In addition, a new formula for proper choice of the number of DA stages (i.e., n ) is offered where dc-power consumption of the circuit ( P-{ ext {dc}} ) is also considered. This formula optimizes G-{P}/P-{ ext {dc}} , and it is preferred over the conventional n-{ ext {opt}} formula. To validate the theoretical analyses, a 2-12-GHz BDDA with high output 1-dB... 

In this study, the thermal buckling analysis of hybrid laminated plates made of two-layered functionally graded materials (FGMs) that are integrated with surface-bonded piezoelectric actuators referred to as (P/FGM)s are investigated. Material properties for both substrate FGM layers and piezoelectric layers are temperature-dependent. Uniform temperature rise as a thermal load and constant applied actuator voltage are considered for this analysis. By definition of four new analytic functions, the five coupled governing stability equations, which are derived based on the first-order shear deformation plate theory, are converted into fourth-order and second-order decoupled partial differential... 

Droplet-based microfluidics offers significant advantages, such as high throughput and scalability, making platforms based on this technology ideal candidates for point-of-care (POC) testing and clinical diagnosis. However, the efficiency of co-encapsulation in droplets is suboptimal, limiting the applicability of such platforms for the biosensing applications. The homogeneity of the bioanalytes in the droplets is an unsolved problem. While there is extensive literature on the experimental setups and active methods used to increase the efficiency of such platforms, passive techniques have received less attention, and their fundamentals have not been fully explored. Here, we develop a novel... 

The Cúk converter operating in discontinuous capacitor voltage mode (DCVM) inherently benefits from PFC features as unity power factor can be achieved by using a constant duty cycle and switching frequency. In this paper, the switch network modeling technique is applied to the Cúk converter operating in DCVM in order to develop its small-signal model under the assumption that it is fed by a dc voltage source. Afterwards, the model is extended to derive the small-signal behavior of the converter while operating as a PFC converter. The validity of the proposed model is confirmed by both simulation and experimental results  

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50...