Sharif Digital Repository

Due to unusual response of structures of buildings with irregularity in their architecture to dynamic excitations, to have a comprehensive knowledge of their behavior during earthquakes is of utmost importance. Building irregularities are in general divided into two major categories, namely Irregularity in Plane and Irregularity in Elevation, and one of the forms of the latter is where there is a split in the levels of the building. In this work, through a series of case studies, the effects of P- phenomenon on the behavior of steel split-level building structures were studied. 5, 10 and 15 story buildings with 5 and 6 bays, and level splitting of 30, 60, 90, 120 and 150 cm were studied. All... 

Since, seepage- related problems account for more than forty percents of earth dams’ failure, seepage analysis is one of the most important stages in designing of embankment dams. The most usual method of making a seepage analysis is doing a two dimensional one in the maximum cross- section and generalizing its results to the third dimension. As a natural consequence of this kind of seepage analysis, the effect of valley shape and material properties’ changes along the third dimension are ignored and so, in narrow valleys where the cross-section changes along longitude profile or in the specific cases of nonhomogeneity, using this kind of analysis can make false results. Besides, because of... 

This research study presents an experimental investigation on forced convection heat transfer of an aqueous ferrofluid flow passing through a circular copper tube in the presence of a magnetic field. Both constant magnetic field and alternating magnetic field was examined. Moreover magnetic field layout and strength and modes of alternating magnetic field was investigated. The flow passes through the tube under a uniform heat flux and laminar flow conditions. The primary objective was to intensify the particle migration and disturbance of the boundary layer by utilizing the magnetic field effect on the nanoparticles for more heat transfer enhancement. Complicated convection regimes caused by... 

The inflation paradigm solves the so-called flatness problem of the standard cosmo- logical model and explains the homogeneity of the Universe by adding a period of exponential expansion at early times to the standard scenario. Moreover, it provides a mechanism for generating density perturbations, serving as the seed of large-scale structures. One of the successes of inflation is predicting primordial scale-invariant perturbations that agree with the observations of cosmic background radiation. Nev- ertheless, there will be a cold, matter-free universe after exponential expansion, so one needs a process that leads to a hot cosmos containing standard particles after the end of inflation, the... 

Plasma Electrolytic Oxidation (PEO) method was used for the preparation of ceramic coatings on Aluminum 5052 substrate in a silicate-based electrolyte containing different concentrations of ZrO2 nanoparticles. Before the addition of nanoparticles into the electrolyte, determining process parameters including current density, coating time, and frequency were examined carefully. After studying corrosion behavior, thickness, and coating morphology in different circumstances, the frequency of 50Hz, the current density of 150mA/cm2, and the coating time of 20 minutes were chosen as the optimum parameters. After that and with the usage of those parameters, ZrO2 nanoparticles were added to the... 

Cardiovascular signals are used to check the performance of the cardiovascular system. Researchers have always been interested in processing cardiovascular signals to achieve goals like diagnosing arrhythmias and heart diseases. The presence of causal or non-causal relationships between these signals can be used to evaluate the cardiovascular system's performance. Cardiovascular signals, such as ECG signal, RR series and systolic arterial blood pressure, chest volume or respiratory force, and blood oxygen concentration signals are used to estimate cardiovascular connectivities. There are different approaches to assessing causal relationships; among these approaches, methods based on Granger... 

In this thesis, combustion of liquid fuel spray under the condition of hot and diluted oxidizer, has been investigated. To this end, a novel type laboratory-scale test rig was designed to study the physics governing the MILD-Spray combustion conditions with an applied approach. The underlined test rig eliminates the operational problems of its predecessor test stands and is used for a heavier fuel with much more complex chemical composition (kerosene). The test section is axially symmetrical, in which the fuel is injected by a pressure-swirl atomizer in the direction of hot and diluted co-flowing air. With the use of the aforesaid test rig, the effect of variables such as oxygen... 

Monitoring driving behaviors of drivers, would avoid their dangerous behaviors and remarkably raise the safety. Nowadays real-time supervision is considered as one of the modern methods of controlling driving behaviors. Previously, due to expensive costs of required equipments and other restrictions, this kind of supervision hasn't been considered fairly. Nowadays increasing usage of smart phones, which contain multiple sensors, enables this type of supervision with lower costs. In the present study we would present some models, to assess the driving behavior via smart phone sensors such as accelerometer, gyroscope and rotation vector  

In practice, structures made of concrete are full of cracks. The strength of concrete is mainly determined by the tensile strength, which is about 10% of the compressive strength. As long as cracking in concrete is unavoidable, we have to try to minimize their detrimental effects. This objective can be achieved by resisting (or limiting) propagation of existing cracks. Because of this, reinforcement (mostly steel) is used to increase the carrying capacity of the material and to control the development of cracks. Concrete structures that fail, already shows a large number of large and small cracks before their maximum carrying capacity is reached. The failure of concrete can be characterized... 

The purpose of this research is to monitor the health of structures using the updated finite element model, in which digital images are used to optimize the numerical model. Structural Health Monitoring (SHM) is always an important and significant issue that has attracted the attention of many researchers in recent years. In general, some researches have been conducted in this field using physical sensors that provide discrete data to the system for analysis. Using cameras to monitor the structure makes it possible to extract continuous and integrated data from the structure using digital images, which is a significant advantage compared to physical sensors.In this research, a steel... 

Conformal Field Theory provides an efficient method for studying physical problems in critical point. Correlation length becomes converge in this point. It can also be clarified that some curves are observed in geometrical phase transition which are conformal invariant and they can be studied using SLE(k). The first mathematical generalization of SLE(k) while keeping the self-similarity property, leads to SLE(k,p). Conformal field theory and SLE are interrelated and their parameters are interpretable for each other. One usually studies the problem in the upper-half plane. Here we consider the problem using a map like (w=L/π Ln z) between the upper-half plane and a special region (e.g. a...