Sharif Digital Repository

Due to unusual response of structures of buildings with irregularity in their architecture to dynamic excitations, to have a comprehensive knowledge of their behavior during earthquakes is of utmost importance. Building irregularities are in general divided into two major categories, namely Irregularity in Plane and Irregularity in Elevation, and one of the forms of the latter is where there is a split in the levels of the building. In this work, through a series of case studies, the effects of P- phenomenon on the behavior of steel split-level building structures were studied. 5, 10 and 15 story buildings with 5 and 6 bays, and level splitting of 30, 60, 90, 120 and 150 cm were studied. All... 

In this research the behavior of Circular Steel Tubes (CSTs) with corrosion under axial force and bending have been studied. There are several factors leading to corrosion in steel structures, especially marine structures that results in strength reduction of whole structure. Steel tubes are widely used in construction of on-shore and off-shore structures such as, oil rigs and platforms, oil and gas transmission lines. Current study focus on strength reduction of steel tubes with “pitting corrosion”. To this end numerical analyses using finite element software, Abaqus, have been performed. Therefore, utilizing verified models, the simultaneous effect of bending, axial load and corrosion on... 

Since, seepage- related problems account for more than forty percents of earth dams’ failure, seepage analysis is one of the most important stages in designing of embankment dams. The most usual method of making a seepage analysis is doing a two dimensional one in the maximum cross- section and generalizing its results to the third dimension. As a natural consequence of this kind of seepage analysis, the effect of valley shape and material properties’ changes along the third dimension are ignored and so, in narrow valleys where the cross-section changes along longitude profile or in the specific cases of nonhomogeneity, using this kind of analysis can make false results. Besides, because of... 

This research study presents an experimental investigation on forced convection heat transfer of an aqueous ferrofluid flow passing through a circular copper tube in the presence of a magnetic field. Both constant magnetic field and alternating magnetic field was examined. Moreover magnetic field layout and strength and modes of alternating magnetic field was investigated. The flow passes through the tube under a uniform heat flux and laminar flow conditions. The primary objective was to intensify the particle migration and disturbance of the boundary layer by utilizing the magnetic field effect on the nanoparticles for more heat transfer enhancement. Complicated convection regimes caused by... 

The inflation paradigm solves the so-called flatness problem of the standard cosmo- logical model and explains the homogeneity of the Universe by adding a period of exponential expansion at early times to the standard scenario. Moreover, it provides a mechanism for generating density perturbations, serving as the seed of large-scale structures. One of the successes of inflation is predicting primordial scale-invariant perturbations that agree with the observations of cosmic background radiation. Nev- ertheless, there will be a cold, matter-free universe after exponential expansion, so one needs a process that leads to a hot cosmos containing standard particles after the end of inflation, the... 

Plasma Electrolytic Oxidation (PEO) method was used for the preparation of ceramic coatings on Aluminum 5052 substrate in a silicate-based electrolyte containing different concentrations of ZrO2 nanoparticles. Before the addition of nanoparticles into the electrolyte, determining process parameters including current density, coating time, and frequency were examined carefully. After studying corrosion behavior, thickness, and coating morphology in different circumstances, the frequency of 50Hz, the current density of 150mA/cm2, and the coating time of 20 minutes were chosen as the optimum parameters. After that and with the usage of those parameters, ZrO2 nanoparticles were added to the... 

Cardiovascular signals are used to check the performance of the cardiovascular system. Researchers have always been interested in processing cardiovascular signals to achieve goals like diagnosing arrhythmias and heart diseases. The presence of causal or non-causal relationships between these signals can be used to evaluate the cardiovascular system's performance. Cardiovascular signals, such as ECG signal, RR series and systolic arterial blood pressure, chest volume or respiratory force, and blood oxygen concentration signals are used to estimate cardiovascular connectivities. There are different approaches to assessing causal relationships; among these approaches, methods based on Granger...