Sharif Digital Repository

This research investigated the long-term environmental effects on the bond at the interface between fiber-reinforced polymer (FRP) and a masonry brick. Seven types of FRP fabrics were used and placed on the masonry brick using the wet lay-up technique. Unidirectional and bidirectional fibers made of aramid, carbon, and glass and also combination of these fabrics were used. A total of 525 specimens were exposed to five chemical solutions with pH values of 2.5, 7, 10, 12.5 and substitution sea water for 1, 3, 6, 9 and 12 months. A chamber was also used to simulate the ultraviolent (UV) radiation on the specimens. A series of single-lap shear tests were performed on these specimens to determine... 

The advantages of fiber reinforced polymer (FRP), such as high specific strength, resistance against corrosion and formability, have made it a more acceptable alternative to conventional materials regarding repairing and retrofitting of structures. Although investigations in recent years have proved the concern of civil engineers about the environmental effects on the bond between FRP and concrete or masonry (especially moisture and temperature), only few researches have been reported on FRP-wood interfaces. This research investigated the effect of five different environments on the bond at the interface between FRP and wood. A series of pull-out tests were performed on 375 wood specimens... 

In current study, microstructure and high-temperature mechanical properties of ZK60 magnesium alloy reinforced by SiC whiskers were investigated after casting, the KOBO extrusion and aging processes. For this purpose, ZK60/SiCw composite specimens were prepared by stir casting technique. In order to achieve a laminar structure and improve the strength, the samples were subjected to KOBO extrusion technique and precipitation hardening, resulting in improved strength and increased ductility. The former is due to grain refining and formation of precipitates in the microstructure, while the latter is attributed to grain refining and formation of laminar structure. To evaluate the strength of the... 

In this research, microstructure evaluation, mechanical properties and thermal conductivity of the Mg-SiCw/Cu composite with laminar structure were investigated. For this purpose, SiC whiskers were added to magnesium alloy by using stir-casting, then the Mg-SiCw composite was bonded to copper layers by warm accumulative roll bonding (ARB). Based on the results of optical microscopy (OM) and scanning electron microscopy (SEM), SiC whiskers were well distributed in the magnesium matrix and they were aligned parallelly when the composites were plastically deformed at higher rolling passes. Furthermore, all layers remained continuous with localized necking sites. Also, no intermetallic compounds... 

This paper deals with the effects of three low-carbon steel filler metals consisting of ferritic and austenitic phases on the weld joints of the tungsten inert gas (TIG) welding of Hardox 500 steel. The correlation between the microstructure and mechanical properties of the weld joints was investigated. For this purpose, macro and microstructure were examined, and then microhardness, tensile, impact, and fracture toughness tests were carried out to analyze the mechanical properties of joints. The results of optical microscopy (OM) images showed that the weld zones (WZ) of all three welds were composed of different ferritic morphologies, including allotriomorphic ferrite, Widmanstätten... 

In this manuscript, the sequel of agglomeration on the vibration of fiber metal laminated (FML) cylindrical shell in the micro phase using developed couple stress theory (MCST). Hamilton's principle has been carried out for deriving the non-classical equations of motion of size-dependent thin micro cylindrical shell on the basis of Love's first approximation theory. Mori-Tanaka and extended rule of mixture are utilized to estimate the mechanical attributes of carbon nanotubes (CNTs) and equivalent fiber, respectively. These four phases CNTs/fiber/polymer/metal laminated (CNTFPML) micro cylindrical shell is analyzed applying beam modal function model for several boundary limitations. Then, an...