Loading...
Search for: yazdanfar--payam
0.077 seconds

    Fabrication of Metallic Nano-Tip Field Emitters and Measurement

    , M.Sc. Thesis Sharif University of Technology Yazdanfar, Payam (Author) ; Rashidian, Bijan (Supervisor)
    Abstract
    The need for integration of electron guns together with thermal considerations of thermionic cathodes has led to design new cold cathode guns based on field emission phenomenon. In first part of this thesis, basic field emission theories, fabrication methods of field emitter arrays, effect of different parameters on the field emission properties of field emitter arrays and applications of these arrays are investigated. After setting up fabrication methods of nano-tip field emitters, in the second part of thesis, Si nano-tips and Si field emitter arrays are fabricated using of thermal oxidation of silicon substrate, lithography, and chemical etching of silicon oxide and silicon substrate. Si... 

    Photothermal heating using a near-field plasmonic probe, application in NFO-CVD

    , Article 5th International Conference on Millimeter-Wave and Terahertz Technologies, MMWaTT 2018, 18 December 2018 through 20 December 2018 ; Volume 2018-December , 2019 , Pages 94-96 ; 21570965 (ISSN); 9781538677179 (ISBN) Yazdanfar, P ; Heydarian, H ; Rashidian, B ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2019
    Abstract
    We present near-field photothermal heating capability of an aperture SNOM probe by exploiting a bowtie nanostructure on top of the probe aperture, which operates as a nanosource of heat to activate underlying nanoparticle. Heat generation density calculated for the bowtie nanostructure at its absorption resonance wavelength of 694 nm verifies efficient concentration of heating power at the bowtie tips, due to optical near-field effects. Total absorbed power for the nanodisk beneath the probe has the same resonance wavelength at 694 nm, which confirms that the temperature increase produced at the underneath nanoparticle is due to utilizing the bowtie nanostructure on top of the SNOM probe as... 

    Modal control of thermoplasmonic behavior of nanostructures based on excitation of perfect absorption resonances

    , Article Journal of the Optical Society of America B: Optical Physics ; Volume 37, Issue 8 , 2020 , Pages 2238-2247 Yazdanfar, P ; Heydarian, H ; Rashidian, B ; Sharif University of Technology
    OSA - The Optical Society  2020
    Abstract
    Controlling the localized heat generation density and temperature profile of nanostructures exploiting perfect absorption of individual resonance modes is reported. The methodology is applied to spherically symmetric nanostructures using the T-matrix method. It is demonstrated that perfect modal splitting of the absorption power at desired wavelengths and individual excitation of the modes provide the ability to localize the generated heat at desired locations, and control the resulting temperature profile in multilayer core–shell structures. By knowing the thermal behavior of individual modes, it is shown that excitation of the perfect absorption modes at desired temperatures can result in... 

    Controlled optical near-field growth of individual free-standing well-oriented carbon nanotubes, application for scattering SNOM/AFM probes

    , Article Nanophotonics ; Volume 11, Issue 21 , 2022 , Pages 4671-4686 ; 21928614 (ISSN) Yazdanfar, P ; Heydarian, H ; Rashidian, B ; Sharif University of Technology
    De Gruyter Open Ltd  2022
    Abstract
    Exploiting localized heat-generation density and the resulting enhanced temperature-rise for controlled growth of carbon nanotubes (CNTs) is reported, and its potentials for batch-production of high-quality CNT probes are demonstrated. Optical near field chemical vapor deposition (ONF-CVD) benchtop fabrication schemes are developed for the localized integration of individual well-aligned carbon nanotubes without bending/buckling exactly at desired nanoscale sites. It is demonstrated that generating self-aligned catalyst nanoparticles superimposed on top of silicon nanotips, along with near-field induced absorption confinement, provide the ability to localize the generated heat at the... 

    Analysis and Study the Effect of Knowledge Management Implementation on Productivity Case Study: Tehran Regional Electric Company

    , M.Sc. Thesis Sharif University of Technology Payam Asgari, Mahboubeh (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    The successful development and implementation of a knowledge management system requires principles and instructions compatible with the organization. In the absence of essential and domestic components of a given organization, the process of knowledge management implementation will fail to be successfully completed. There are now various models for the implementation of knowledge management; however, these models only recommend general strategic guidelines, hardly offering any specific strategic plans as to how organizations can successfully and effectively implement knowledge management. Since the promotion of productivity is the ultimate goal of knowledge management, the present research... 

    Coordinated Scheduling of Power and Natural Gas Systems Considering Demand Uncertainty

    , M.Sc. Thesis Sharif University of Technology Nik Payam, Hossein (Author) ; Rafiee, Majid (Supervisor)
    Abstract
    The everyday increasing electricity consumption of household and industrial sectors across the world, and also the limited generation capacity and fuel supplies has led electricity companies, whether in private or government sectors, to focus deliberately on power generation planning, its costs, risks and constraints Because of many reasons including high efficiency, low cost of capital investment, expeditious permitting, and operation flexibility of gas-fired generating units, electricity companies prefer them to old ones like coal-fired or oil-fired generating units. Thus natural gas has gained a significant share in the portfolio of electricity generation fuel resources, and it is... 

    Dual-color plasmonic probes for improvement of scanning near-field optical microscopy

    , Article Journal of the Optical Society of America B: Optical Physics ; Volume 35, Issue 3 , 2018 , Pages 627-635 ; 07403224 (ISSN) Heydarian, H ; Shahmansouri, A ; Yazdanfar, P ; Rashidian, B ; Sharif University of Technology
    OSA - The Optical Society  2018
    Abstract
    Design and modeling of a class of scanning near-field optical microscope (SNOM) probe for improving performance are reported. The basic idea is to generate more than one hot spot with well-known spatial distribution. This not only enables one to calibrate out many sorts of errors in conventional SNOM but also results in the increase in the speed of imaging. We utilize plasmonic nanocolor sorter structures to design aperture probes that create two spatially distinct hot spots. The method of moment analysis technique is employed to tune the probe for operation at standard Ar-ion laser wavelengths (457.9 and 514.5 nm). © 2018 Optical Society of America  

    Robust DTC control of doubly-Fed induction machines based on input-output feedback linearization using recurrent neural networks

    , Article Journal of Power Electronics ; Volume 11, Issue 5 , 2011 , Pages 719-725 ; 15982092 (ISSN) Payam, A. F ; Hashemnia, M. N ; Faiz, J ; Sharif University of Technology
    2011
    Abstract
    This paper describes a novel Direct Torque Control (DTC) method for adjustable speed Doubly-Fed Induction Machine (DFIM) drives which is supplied by a two-level Space Vector Modulation (SVM) voltage source inverter (DTC-SVM) in the rotor circuit. The inverter reference voltage vector is obtained by using input-output feedback linearization control and a DFIM model in the stator a-b axes reference frame with stator currents and rotor fluxes as state variables. Moreover, to make this nonlinear controller stable and robust to most varying electrical parameter uncertainties, a two layer recurrent Artificial Neural Network (ANN) is used to estimate a certain function which shows the machine... 

    Alginate/PVP/Pomegranate Seed Hydrogels as Bio-sorbents of Water Pollutants

    , M.Sc. Thesis Sharif University of Technology Hashemzadeh, Payam (Author) ; Frounchi, Masoud (Supervisor) ; Mollaabasi, Payam (Co-Supervisor)
    Abstract
    In the past decades, hydrogels have been used as an adsorbent with high potential to remove pollutants in water. Hydrogels are three-dimensional polymer networks that have the ability to absorb and store water and water-soluble compounds due to the presence of hydrophilic functional groups in their structure. Different particles with unique characteristics can be used to increase the efficiency of hydrogel absorption. Based on the type of pollutant, hydrogels are divided into three different forms, including particles, films and nanocomposites. In this research, the absorption effect of metal cations as well as the absorption kinetics of polyvinyl pyrrolidine-based hydrogels, sodium... 

    Optimization of sputtering parameters for the deposition of low resistivity indium tin oxide thin films

    , Article Acta Metallurgica Sinica (English Letters) ; Vol. 27, issue. 2 , Apr , 2014 , p. 324-330 Yasrebi, N ; Bagheri, B ; Yazdanfar, P ; Rashidian, B ; Sasanpour, P ; Sharif University of Technology
    2014
    Abstract
    Indium tin oxide (ITO) thin films have been deposited using RF sputtering technique at different pressures, RF powers, and substrate temperatures. Variations in surface morphology, optical properties, and film resistances were measured and analyzed. It is shown that a very low value of sheet resistance (1.96 ω/sq.) can be achieved with suitable arrangement of the deposition experiments. First, at constant RF power, deposition at different pressure values is done, and the condition for achieving minimum sheet resistance (26.43 ω/sq.) is found. In the next step, different values of RF powers are tried, while keeping the pressure fixed on the previously found minimum point (1-2 Pa). Finally,... 

    The Effect of Olive Leaf Green Inhibitor on the Corrosion Resistance of Steel Reinforcement in Geopolymer Concrete Pore Solution

    , M.Sc. Thesis Sharif University of Technology Khalili, Mohammad Reza (Author) ; Afshar, Abdollah (Supervisor) ; Hosseini, Payam (Co-Supervisor)
    Abstract
    In this research project, the aim was to investigate the potential of olive leaf extract as an eco-friendly inhibitor for enhancing the corrosion resistance of reinforcing steel in simulated geopolymer concrete pore solution (GCP) containing chloride ions. The inhibitory effects of olive leaf extract were evaluated using various electrochemical techniques as well as scanning electron microscopy. The main phenolic compounds present in olive leaf extract were identified using high performance liquid chromatography (HPLC). Moreover, the elements and chemical bonds present in the surface passive film of the steel bar immersed in the olive leaf inhibiting system were characterized using... 

    Iran’s oil development scenarios by 2025 [electronic resource]

    , Article Energy Policy ; Volume 56, May 2013, Pages 612-622 Abbaszadeh, Payam ; Sharif University of Technology

    Dynamic Simulation and Control of Reactive Systems Involving Metabolic Pathways

    , M.Sc. Thesis Sharif University of Technology Aghaee Foroushani, Mohammad (Author) ; Bozorgmehry Bozarjomehry, Ramin (Supervisor) ; Setoodeh, Payam (Co-Supervisor)
    Abstract
    In this project, modeling, simulation, and control of the Saccharomyces Cerevisiae were studied. In the first section, simulation and control of a structural model of saccharomyces Cerevisiae were performed. Fuzzy Logic Controller (FLC) as a model-independent controller and Global Linearization Controller (GLC) as a model-based controller were designed. Additionally, two types of Kalman filters were designed to predict all states of the structural model: 1-Extended Kalman Filter (EKF), 2- Unscented Kalman Filter (UKF). As a concise explanation, the control action of the GLC is a function of all states of the model, and since that measuring all metabolites is not practical, the EKF and UKF... 

    Exploring Methodological Approaches of Experimental Studies in the Field of Neuroarchitecture: A Systematic Review

    , Article Health Environments Research and Design Journal ; 2023 ; 19375867 (ISSN) Rad, P. N ; Behzadi, F ; Yazdanfar, S. A ; Ghamari, H ; Zabeh, E ; Lashgari, R ; Sharif University of Technology
    SAGE Publications Inc  2023
    Abstract
    Objectives: This systematic review aims to strengthen the relationship between architecture and neuroscience by classifying data measurement techniques in the field of neuroarchitecture with a focus on the most practical and common methodological approaches. It classifies data recording techniques in different architectural categories (e.g., interior, urban, built environment). Backgrounds: With regard to urban life developments and technological breakthroughs, studies of human interactions with environments have been expanding in recent years. Additionally, recent advances in neuroscience have allowed architects to find out more about human experiences in built environments, but there are...