Loading...
Search for: zandi--mohammad
0.12 seconds

    Flow of Saliva in a Lab-on-a-chip under Electrokinetic Body Force

    , M.Sc. Thesis Sharif University of Technology Zandi, Mohammad (Author) ; Saeedi, Mohammad Hassan (Supervisor)
    Abstract
    The lab-on-a-chip (LOC) devices utilizing electroosmosis for flow actuation are usually encountered with non-Newtonian behavior of working fluids. Hence, studying the flow of non-Newtonian fluids under an electroosmotic body force is of high importance for accurate design and active control of these devices. In this thesis, mixed electroosmotically and pressure driven flow of salivathrough a rectangular microchannel is examined utilizing two viscoelastic constitutive equations, namely PTT and FENE-P models. Since the hydrodynamic entry length is usually negligible for microflows, a hydrodynamically developed flow is considered in the analysis. The governing equations in dimensionless form... 

    A Study on the Identifiers of Excess Demand in Iran’s Petrochemicals Exchange

    , M.Sc. Thesis Sharif University of Technology Zandi Goharrizi, Masoud (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Co-Supervisor)
    Abstract
    Iran's petrochemicals exchange has experienced regular excess demand occurrence in recent years which has resulted in most transactions being done at ceil price specified by Iran's mercantile exchange. This study shows that the mechanism determined by Iran's mercantile exchange for doing transactions has given people the incentive to state their initial demand higher than their real demand in order to be able to gain their real demand in market. In order to do this, I have used data related to all transactions done in Iran's petrochemical exchange during March 2013 and March 2016 in a panel logit model and show that monopolistic power used by suppliers and the probability of excess demand... 

    Fe3O4 Nano Particle-Based Magnetic Solid Phase Extraction of Oxadiargy1 and Fluoxetine from Aquatic and Biological Media

    , M.Sc. Thesis Sharif University of Technology Zandi, Omid (Author) ; Bagheri, Habib (Supervisor)
    Abstract
    In this study new magnetic solid phase extraction (MSPE) methods based on Fe3O4 magnetic nanoparticles (NPs) for extraction and preconcentration of oxadiargyl and fuoxetine from aqueous and biological samples were developed. In the first work, Fe3O4 NPs was successfully used as a magnetic nano-sorbent in magnetic micro-solid phase extraction (M-µ-SPE) of oxadiargyl, a newly used pesticide, from environmental water samples prior to gas chromatography-mass spectrometry determination. Oxadiargyl in mild acidic condition has tendency to be adsorbed on Fe3O4 NPs surfaces. Most important parameters that affect the extraction efficiency were also studied. Under optimized condition, the proposed... 

    Synthesis and in Vitro/in Vivo Evaluation of Bioprinted and Core-Shell Systems Containing Proteoglycan Nanoparticle and Growth Factor for Skin Tissue Regeneration

    , Ph.D. Dissertation Sharif University of Technology Zandi, Nooshin (Author) ; Simchi, Abdolreza (Supervisor) ; Shokrgozar, Mohammad Ali (Supervisor) ; Tamjid, Elnaz (Co-Supervisor)
    Abstract
    Tissue engineering has the potential to revolutionize our health care system. Conceptually, lost or malfunctioning tissues will be replaced by man-made biological substitutes to restore, maintain, or improve function. Tissue engineering has already shown great promise to contribute to treatments of a myriad of diseases including osteoarthritis, cancer, diabetes, skin burns, cardiovascular conditions and various traumatic injuries. Tissue engineering is a highly multidisciplinary discipline that demands integration of knowledge, tools and skills from biology, chemistry, engineering and medicine. Integrating nano- and microtechnologies into clinically sized implants represents a major... 

    Wettability Alteration of Reservoir Rocks to Super Gas-Wet Condition Using Nanocomposite by Applying Contact Angle Measurement for Gas-Crude Oil System

    , M.Sc. Thesis Sharif University of Technology Zandi, Ahmad (Author) ; Ghazanfari, Mohammad Hossien (Supervisor) ; Fatemi, Mobeen (Supervisor) ; Esmaeilzadeh, Pouriya (Co-Supervisor)
    Abstract
    Today, increasing the productivity of reservoirs is more important than in the past, while the use of nanoparticles to change the wettability of rock and increase the recovery factor from the reservoir has been considered by many researchers. Despite previous studies on the use of nanoparticles to change the wettability of rock to gas-wet, the use of nanocomposites with super gas-wet at high temperature and pressure in the crude oil-gas system has rarely been considered. In this research, several nanocomposites with different structures have been synthesized in the laboratory and nanofluids with different formulations have been used to coat the rock thin sections and measure droplet contact... 

    Preparation of ethyl cellulose microcapsules containing perphenazine and polymeric perphenazine based on acryloyl chloride for physical and chemical studies of drug release control [electronic resource]

    , Article Polymer International ; Volume 47, Issue 4, pages 413–418, December 1998 Zandi, M ; Pourjavadi, A ; Hashemi, S. A ; Arabi. , H ; Sharif University of Technology
    Abstract
    The preparation of microcapsules containing perphenazine by solvent evaporation using ethyl cellulose is described. The microparticles are formed after solvent evaporation and polymer precipitation. The drug was dissolved in a polymer solution and emulsified into an aqueous phase to form microcapsules. To study the effects on particle size, encapsulation efficiency and morphology, three different molecular weights of ethyl cellulose (Mw=47000, 71000 and 99000) were used. Covalent bonding of drugs to polymers via hydrolytically or enzymatically cleavable covalent bond was achieved for sustained drug delivery. The release rate of perphenazine from these systems was investigated  

    Human cardiac troponin i sensor based on silver nanoparticle doped microsphere resonator

    , Article Journal of Optics (United Kingdom) ; Volume 14, Issue 12 , 2012 ; 20408978 (ISSN) Saliminasab, M ; Bahrampour, A ; Zandi, M. H ; Sharif University of Technology
    2012
    Abstract
    Human cardiac troponin I (cTnI) is a specific biomarker for diagnosis of acute myocardial infarction (AMI). In this paper, a composite sensing system of an optical microsphere resonator and silver nanoparticles based on surface enhanced Raman scattering (SERS) and stimulated Raman scattering (SRS) techniques towards a point of care diagnostic system for AMI using the cTnI biomarker in HEPES buffered solution (HBS) is proposed. Pump and Raman signals enter the optical fiber coupling into the microsphere, and then SRS occurs in the microsphere. The presence of silver nanoparticles on the microsphere surface provides a tremendous enhancement of the resulting Raman signal through an... 

    Three-particle deterministic secure and high bit-rate direct quantum communication protocol

    , Article Quantum Information Processing ; Volume 12, Issue 7 , 2013 , Pages 2441-2451 ; 15700755 (ISSN) Jahanshahi, S ; Bahrampour, A ; Zandi, M. H ; Sharif University of Technology
    2013
    Abstract
    A scheme for deterministic secure and high bit-rate direct communication without resorting to a distinct control interval is proposed. It utilizes three entangled qubits, and presents higher bit transfer rate of information and higher security. The security of protocol is asserted by introducing a security control for each transferred bit. The protocol is investigated for a class of individual attacks and it is explicitly showed that the protocol has a high security even in the presence of channel loss  

    Design and Optimization of the Operation and Readout of Superconductor Qubits

    , Ph.D. Dissertation Sharif University of Technology Zandi, Hesam (Author) ; Khorasani, Sina (Supervisor) ; Fardmanesh, Mehdi (Supervisor)
    Abstract
    Computational instruments such as personal computers (PC) are among the most important and developed inventions needed for the society. Nowadays, the fastest classical computing machines are based on the conventional semiconductor fabrication technology. But these computers cannot satisfy all of the requirements of today’s ongoing developments. Two important weaknesses of the undergoing technology are the speed of computing which is in the frontend of the semiconductor technology, and solving some complicated problems which may take years and even decades with these computers. This is while, based on quantum theory and related algorithms, solving of these problems would take much less time.... 

    Characterization and Properties of Red Mud and Utilization of it in Ceramics

    , M.Sc. Thesis Sharif University of Technology Zandi Shafagh, Navid (Author) ; Yuzbashi Zade, Hossein (Supervisor)
    Abstract
    In this project, after studies about red mud, a product of the Bayer process in production of Alumina, its properties, and characteristics, red mud samples, taken from Jajarm Alumina production unit, were studied, tested, and processed. After primary preparation, characteristic determination experiments were performed on these wastes that contain iron oxide, TiO2, Al2O3, etc., and some of their physical, chemical and mineralogical characteristics were determined. These experiments include chemical analysis, XRD, XRF, compressive strength measurement, grain size distribution, prosity, etc. Considering the properties of this substance and its ceramic usages, processess of making ceramic... 

    Security enhanced direct quantum communication with higher bit-rate

    , Article International Journal of Quantum Information ; Volume 11, Issue 2 , 2013 ; 02197499 (ISSN) Jahanshahi, S ; Bahrampour, A. R ; Zandi, M. H ; Sharif University of Technology
    2013
    Abstract
    A scheme for deterministic secure direct communication based on ping-pong protocol without restricting the security control only to a distinct control mode and debate via classical channel is proposed. It utilizes an entangled pair of qubits and presents a higher bit-rate transfer of information together with a higher security than ping-pong protocol. The security of protocol is enhanced by introducing a control factor for each message mode. It is explicitly showed that the protocol has a high degree of security against a class of individual attacks, and successfully resolves the famous Wojcik attack  

    Study of junction and bias parameters in readout of phase qubits

    , Article Physica C: Superconductivity and its Applications ; Volume 475 , 2012 , Pages 60-68 ; 09214534 (ISSN) Zandi, H ; Safaei, S ; Khorasani, S ; Fardmanesh, M ; Sharif University of Technology
    2012
    Abstract
    The exact numerical solution of the nonlinear Ginzburg-Landau equation for Josephson junctions is obtained, from which the precise nontrivial current density and effective potential of the Josephson junctions are found. Based on the resulting potential well, the tunneling probabilities of the associated bound states are computed which are in complete agreement with the reported experimental data. The effects of junction and bias parameters such as thickness of the insulating barrier, cross sectional area, bias current, and magnetic field are fully investigated using a successive perturbation approach. We define and compute figures of merit for achieving optimal operation of phase qubits and... 

    Efficient method for oxidation of ketones to esters with 4-aminoperoxybenzoic acid supported on silica gel

    , Article Synthetic Communications ; Volume 38, Issue 12 , 2008 , Pages 2037-2042 ; 00397911 (ISSN) Ghazanfari, D ; Hashemi, M. M ; Shahidi Zandi, M ; Sharif University of Technology
    2008
    Abstract
    4-Aminoperoxybenzoic acid supported on silica gel was found to be a versatile and efficient oxidant for the oxidation of ketones to esters. Copyright © Taylor & Francis Group, LLC  

    Harmonic content and relaxation resonant frequency of a modulated laser diode

    , Article Scientia Iranica ; Volume 16, Issue 2 D , 2009 , Pages 145-156 ; 10263098 (ISSN) Zandi, H ; Bavafa, M ; Chamanzar, M. R ; Khorasani, S ; Sharif University of Technology
    2009
    Abstract
    In this paper, an analysis of the harmonic contents of the optical output power for an in-plane single mode laser diode is performed, and the results are described in detail. In the first step, the absolute value of power for each harmonic is obtained in terms of various laser diode parameters, and the variations of external parameters, such as modulation current, bias current and frequency, are discussed. The analysis is done by direct solution of the rate equations of an arbitrary laser diode for carrier and photon densities. It is known that the optical power has a nonlinear dependence on frequency, and the maximum optical power of each harmonic is attained in its resonance frequency. The... 

    Analysis of power harmonic content and relaxation resonant frequency of a diode laser

    , Article Physics and Simulation of Optoelectronic Devices XV, San Jose, CA, 22 January 2007 through 25 January 2007 ; Volume 6468 , 2007 ; 0277786X (ISSN); 081946581X (ISBN); 9780819465818 (ISBN) Zandi, H ; Bavafa, M ; Chamanzar, M. R ; Khorasani, S ; Sharif University of Technology
    2007
    Abstract
    We have performed an analysis of harmonic contents of the optical output power for a diode laser and described the results in details. In the first step the absolute value of power for each harmonic is obtained in terms of various diode laser parameters, and the variations of external parameters such as modulation current, bias current and frequency are discussed. The analysis is done by direct solution of rate equations of an arbitrary diode laser for carrier and photon densities. We conclude that the maximum power occurs at isolated peaks and their loci have been investigated and shown to be predictable by theory. It is known that the optical power has a nonlinear dependence on frequency,... 

    Cross-flow vortex induced vibrations of inclined helically straked circular cylinders: An experimental study

    , Article Journal of Fluids and Structures ; Volume 59 , November , 2015 , Pages 178-201 ; 08899746 (ISSN) Zeinoddini, M ; Farhangmehr, A ; Seif, M. S ; Zandi, A. P ; Sharif University of Technology
    Academic Press  2015
    Abstract
    Effects of suppression devices on the vortex induced vibration (VIV) of inclined cylinders appear not to have received previous due attentions. The current paper reports the results of some towing tank experiments on the vortex induced cross-flow vibrations of bare and helically straked cylinders in vertical and inclined arrangements. Rigid test cylinders were mounted on a single degree of freedom elastic support. The inclination angles examined were θ=0°, ±20° and ±45°. The Reynolds number ranged from 4000 to 45. 000 and the reduced velocity from 1 to 16. With all tests the mass ratio and the mass-damping parameters were kept constant.Test results on "inclined bare" and "inclined helically... 

    Two mode mechanical non-Gaussian squeezed number state in a two-membrane optomechanical system

    , Article Optics Communications ; Volume 370 , 2016 , Pages 55-61 ; 00304018 (ISSN) Shakeri, S ; Mahmoudi, Z ; Zandi, M. H ; Bahrampour, A. R ; Sharif University of Technology
    Elsevier  2016
    Abstract
    We consider an optomechanical system with two membranes when a bichromatic laser field with red-sideband and blue-sideband frequencies is applied in the single photon strong coupling regime. It is shown that using the mode selecting method and under the Lamb-Dicke approximation, motion of membranes can evolve to single or two mode squeezed number states. By considering the environmental effect, a Wigner function is plotted for understanding the conditions that lead to the generation of non-Gaussian states. The results show that, in this system, initial states of membranes are important to generation of non-Gaussian mechanical squeezed number states. © 2016 Elsevier B.V. All rights reserved  

    Processing and properties of nanofibrous bacterial cellulose-containing polymer composites: a review of recent advances for biomedical applications

    , Article Polymer Reviews ; Volume 60, Issue 1 , 2020 , Pages 144-170 Eslahi, N ; Mahmoodi, A ; Mahmoudi, N ; Zandi, N ; Simchi, A ; Sharif University of Technology
    Taylor and Francis Inc  2020
    Abstract
    Bacterial cellulose (BC) is an extracellular natural polymer produced by many microorganisms and its properties could be tailored via specific fabrication methods and culture conditions. There is a growing interest in BC derived materials due to the main features of BC such as porous fibrous structure, high crystallinity, impressive physico-mechanical properties, and high water content. However, pristine BC lacks some features, limiting its practical use in varied applications. Thus, fabrication of BC composites has been attempted to overcome these constraints. This review article overviews most recent advance in the development of BC composites and their potential in biomedicine including... 

    Determination of the Optimal Structure of Microgrids in an Active Distribution Network Considering Network Expansion Plans

    , M.Sc. Thesis Sharif University of Technology Zandi Goharrizi, Amir Hossein (Author) ; Fotuhi Firuzabad, Mahmud (Supervisor)
    Abstract
    Several goals, including environmental issues, reducing dependence on fossil fuels, increasing resilience, reducing energy and power losses, and increasing system reliability, have encouraged policymakers and power companies to connect renewable distributed generation resources at the level of distribution networks. According to the mentioned points and needs, a discussion is raised in the form of modern distribution systems, called microgrids. On the other hand, today with the increase in electricity demand, microgrids play an important role in smart grids, which requires a new approach for optimal design and improving their performance. Also, dividing large distribution networks into a... 

    Change-point estimation of the process fraction non-conforming with a linear trend in statistical process control

    , Article International Journal of Computer Integrated Manufacturing ; Volume 24, Issue 10 , 2011 , Pages 939-947 ; 0951192X (ISSN) Zandi, F ; Niaki, S. T. A ; Nayeri, M. A ; Fathi, M ; Sharif University of Technology
    2011
    Abstract
    Despite the fact that control charts are able to trigger a signal when a process has changed, it does not indicate when the process change has begun. The time difference between the changing point and a signal of a control chart could cause confusions on the sources of the problems. Knowing the exact time of a process change would help to reduce the time for identification of the special cause. In this article, a model for the change-point problem is first introduced and a maximum-likelihood estimator (MLE) is applied when a linear trend disturbance is present. Then, Monte Carlo simulation is applied in order to evaluate the accuracy and the precision performances of the proposed...