Sharif Digital Repository

Platinum extraction from the spent reforming catalysts in iodine-iodide solutions at temperatures from 25 to 95 °C was investigated. The reforming catalyst mostly consists of a porous gamma alumina support with metallic platinum finely dispersed on the walls of the nano-pores of the catalyst support. The effect of a variety of factors, including catalyst particle size, impeller agitation speed, reactant concentrations, liquid to solid mass ratio, temperature and the solution pH on the Pt extraction rate and recovery were investigated. It was found that the catalyst particle sizes less than 106 μm and impeller agitation speed higher than 700 rpm eliminated the effects of catalyst size and... 

The disposal of polychlorinated biphenyls (PCBs) as persistent organic pollutants from the environment has been normally performed by isolation from soil or water because of their biological activity and toxic potential. In the present investigation, catalytic hydrodehalogenation was used to detoxify PCBs-contaminated transformer oil. All reactions were directed on an oil containing 11.09 wt% of PCBs utilizing palladium supported on multi-walled carbon nanotubes (Pd/MWCNTs). The amount of hexa-chlorine homologues reduced considerably from 5.07% to less than 800 ppm utilizing HDC at the atmosphere of argon. Moreover, the amounts of long half-lives and bioaccumulative congener of PCB 153... 

The disposal of polychlorinated biphenyls (PCBs) as persistent organic pollutants from the environment has been normally performed by isolation from soil or water because of their biological activity and toxic potential. In the present investigation, catalytic hydrodehalogenation was used to detoxify PCBs-contaminated transformer oil. All reactions were directed on an oil containing 11.09 wt% of PCBs utilizing palladium supported on multi-walled carbon nanotubes (Pd/MWCNTs). The amount of hexa-chlorine homologues reduced considerably from 5.07% to less than 800 ppm utilizing HDC at the atmosphere of argon. Moreover, the amounts of long half-lives and bioaccumulative congener of PCB 153... 

Distal radius fractures are prevalent injuries. Unstable fractures with joint involvement generally require surgical fixation to optimize outcomes. One of the ways to treat unstable fractures is percutaneous pinning, which usually has less stiffness compared to the common method of plating in treating this type of fracture. Still, it has some advantages compared to the plating method. Pi clamp fixation method is one of the novel approaches for stabilizing distal radius fractures that utilizes a set of K-wires and a small clamp. This study uses the finite element method (FEM) to examine the effect of the four factors that are expected to have an effect on the stability of fixation. To conduct... 

Background: Basic epidemiological data can provide estimates when discussing disease burden and in the planning and provision of healthcare strategies. There is little quantitative information in the literature regarding prevalence of traumatic injuries from developing countries. Objectives: The aim of the current preliminary study was to reveal the prevalence and age and gender distribution of various traumatic injuries in a tertiary referral orthopedic hospital in Iran. Patients and Methods: In a prospective descriptive study, all traumatic injured patients attending the Orthopedic Trauma Unit of our center in a five year period were included. Demographic details, the cause of injury,... 

An appropriate pre-processing algorithm in classification is not only of great importance with respect to classifier choice, but also would be more crucial. In this paper, a pre-processing step is proposed in order to increase accuracy of classification. The aim of this approach is finding a transformation matrix causes classes to be more discriminable by transforming data into the new space and consequently, increases the classification accuracy. This transformation matrix is computed through two methods based on linear discrimination. In the first method, we use class independent LDA to increase classification accuracy by finding a transformation that maximizes the between-class scatter... 

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost... 

Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing... 

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for... 

The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been... 

Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy...