Sharif Digital Repository

The main goal of this study is to evaluate the seismic performance of HV circuit breakers of power substations and optimize their seismic behavior using base isolation systems. Iran is in a region with high seismicity and has experienced severe earthquakes in recent decades that have resulted in serious damages to critical infrastructures. These include power substations that are important during and even after an earthquake in providing electricity for homes, industries, amenities, emergency facilities, public transportation and more. The seismic performance of HV circuit breakers, which is an important equipment for power substations, has not been satisfactory in past earthquakes and has... 

Today, composites are widely used in various industries, thus the study and analysis of properties and their behaviors are very important. In addition, the use of multi-layered composites in the aerospace industry is important. The composite-elastomer structures, specially their spherical shape, are widely used as flexible joint in aerospace industries, such as the thrust vector control system in solid-propellant rockets and the helicopter industry. In this study, an analytical approach is proposed for calculating the interlaminar stresses of laminated plates and spherical shells with arbitrary laminations and boundary conditions based on a threedimensional multi-term extended Kantorovich... 

A methodology is developed for designing optimum passive energy dissipation systems using active control algorithms. A combination of stiffness reduction and increase of damping is utilized to reduce both acceleration and displacement response. In this method, first an active control system is designed using pole assignment and sliding mode control algorithm. Here, the methods to use the actives algorithms aremodified such that the resulting properties can be achieved by a passive control system using viscous fluid dampers. Next, a passive control system is designed to result in the structural properties close to those extracted from the actively controlled system. It is shown that this... 

AISI 4340 steel bars were austenitized at 900°C for 1 hour followed by heating at 740°C (ferrite and austenite region) for 100 min and quenching into a salt bath at 300°C for different times followed by quenching into water to obtain triple phase microstructures with 34 Vol.% ferrite and various martensite (or bainite) contents. Presence of three phases in adjacent of each other confirmed by metallographic analysis and TEM technique. Volume fraction of different phases was measured by image analyser. The results of optical microscopy showed that by increasing VM, morphology of martensite varies from uniform distribution of small spherical network particles to large blocky islands with... 

Laufer and Hulstijn (2001) proposed the Task-Induced Involvement Load Hypothesis stating that in the retention of new words in an incidental context, tasks with higher involvement load will be more effective than tasks with lower involvement load. The present study aimed to examine whether the retention of vocabulary is enhanced with an increase in the amount of task-induced involvement load in an intentional learning environment. Moreover, it was investigated whether proficiency level of learners had a role in the effectiveness of the vocabulary tasks with different involvement loads. Four groups of university students, male and female, participated in the study. They were given a TOEFL... 

In this study, a new resorcinol-formaldehyde xerogel was synthesized based on sol-gel technology and employed as a sorbent for micro solid phase extraction (µ-SPE) of BTEX and some selected pesticides from aqueous samples.
In the first part, a µ-SPE method in combined with headspace solvent microextraction (HS-SME) along with gas chromatography- mass spectrometry detection (GC–MS) was developed for the analysis of BTEX in aqueous samples. In our knowledge, this is for the first time that these two different extraction methods has been coupled to maximize the advantage of each extraction method. Influential parameters such as the peristaltic pump flow rate, extraction volume, extraction... 

Nowadays, with the development of machine learning and deep learning on one hand, and the dramatic increase in the amount of information available and the complexity of models on the other hand, it is practically impossible to implement learning algorithms on a single node. Thus it is inevitable to distribute learning algorithms on several machines. In a distributed system, the main operations are divided into smaller tasks and performed by different nodes. The final result is then calculated by exchanging messages among the existing nodes.In this thesis, a method is introduced to compute the gradient of a massive data set in a distributed system. In this problem, there are a number of... 

In recent years, climate change due to greenhouse gases caused an increase in frequency and intensity of the natural disasters such as hurricanes, blizzards and floods. Moreover, it is anticipated that such events will increase in the future. As a result, power system decision makers are looking for methods to improve power system resiliency against such natural disasters with low occurrence probability and high impact. In this report, the distribution system resiliency has improved via placing remote control sectionalizing switches and micro grids formation during natural disasters. In this regard, the concept of resiliency and its characteristics along with the effect of remote control... 

In current societies, reliability is an important and fundamental factor in designing and manufacturing products and it cannot be ignored anyway; because sometimes malfunction and failure in a system can cause severe financial losses and health issues. In the field of optimizing reliability by redundancy allocation, one of the structures that has drawn many researchers attention is series-parallel structure. In the models proposed for reliability optimization in series-parallel systems, there is a restricting assumption which all components of a sub-system have to be homogeneous. In this thesis, new models are presented which enable components of a sub-system be non-homogeneous. Modeling is... 

In this investigation, silica-based iron-metal catalyst was synthesized by the Atomic layer deposited (ALD) method with iron-acetylate (Fe(acac)3) as a precursor in different loading dosages. The synthesized catalyst were characterized by nitrogen absorption and excretion (BET), by Field Emission Scanning Electron Microscope (FESEM), X-ray diffraction (XRD), and Temperature-Programmed Reduction (TPR), Fourier-transform infrared spectroscopy (FTIR), Atomic Emission Spectroscopy (ICP) etc.
The temperature range of 180 to 200 °C was determined for the self-limited chemisorption of Fe(acac)3 on the silica surface as the first and the most important step in a single atomic cycle. Also the... 

Sulfur components are one of the most important impurities in various petroleum fractions that cause many problems in refining and consumption. In this thesis, hydrodesulfurization process, which has an economical and environmental especial position in petroleum and other related industries, has been discussed. In hydrodesulfurization process, under specific operation condition, sulfur components are converted catalytically to the H2S in a fixed bed reactor. In this study dibenzothiophene, which is one of the most strength and complex sulfur components, is considered as the base component. A Langmuir-Hinshelwood kinetic equation is used to describe the reaction by using the commercial... 

There are many methods for direction finding (DF) of radar targets, while the complexity and time elapsed calculation are their main drawbacks, thus the real time implementation of this methods are difficult. Artificial neural network (ANN) for DF is one of the optimum and good ways to implementation that have better result versus other techniques. In this thesis, direction finding problem for radar targets by using artificial neural networks have been studied. A new method is presented to detect the multiple targets simultaneously, that it can be implemented in digital form easily. Here one-dimensional DF by using uniform linear array (ULA) discussed and formulated, then the proposed... 

Energy of graphs first defined by Ivan Gutman in 1978[1]. Let G be a graph with (0,1)-adjacency matrix A and let λ_1≥⋯≥λ_n be eigenvalues of A. Grap h energy is defined as the sum of absolute values of the eigenvalues of A and is shown by ɛ(G). let H_1,…,H_k be the vertex-disjoint induced subgraphs of graph G, it is proved that energy of G is at least equal to the sum of energy of H_i subgraphs, where the summation is over i. Also by partitioning edges of G to L_1,…,L_k subgraphs, energy of G is at most equal to sum of energy of L_i subgraphs , where the summation is over i. In this thesi s we study energy of graphs, specially... 

The problem of Origination of The Universe is one of the most important issues in the history of philosophy whether in western edition or in Islamic thought. The most problematic aspect of the Origination is Temporal Origination. From about 30 years ago as a result of the works of a famous American philosopher William Lane Craig, the debate between temporality and Eternity of the Universe became a fresh topic in western philosophy. In this research we want to survey the philosophical arguments for and against the temporality of the Universe based on the views of: W.L.Craig, Q.Smith and Allamah S.M.H Al-Tabatabaie.
 

This thesisconsiders new fundamental approaches to yield heterogeneous catalysts in to three sections. The first section described the immobilization of the molybdenum-Schiff base complexes in pores of SBA-15 in two different methodologies depending on the actual structure of the complexes., (i) stepwise formation of the complex by initial covalent anchoring of one of the components and consecutive solid phase synthesis consisting of the condensation of the other components of the salen complex (iii) one-step complex immobilization by covalent binding through the ligand.Based on the first methodology, we report the preparation of ordered mesoporous silica SBA-15 containing a molybdenum...