Sharif Digital Repository

Increasing the application of elastomeric structures in industries has caused an interest in the researchers for nonlinear elasticity and viscoelasticity of solids. Such materials which show large deformation and rate dependent behavior are treated by visco-hyperelastic constitutive equations. Based on visco-hyperelastic constitutive equations, total stress is divided into two parts: quasi-static and viscous stress. The method for determining the visco-hyperelastic constitutive equation is strictly dependent on the chosen rheological model. In this project, a new visco-hyperelasic constitutive equation in the integral form was introduced based on the Zener model. Also, based on the internal... 

In the limit case of incompressibility, the displacement-based finite element methods are not capable of finding the solutions with adequate accuracy. Moreover, discontinuities in displacement field or strain field which exist in the interior of the elements should be dealt with appropriately. The u/p mixed formulation provides a suitable context for modeling the incompressible problems. It is capable of solving general problems in which there exist geometrical or material nonlinearities. In the case of employing the eXtended Finite Element Method (XFEM), uniform meshes can be used for problems with discontinuities and in fact the discontinuities can be decoupled from the mesh. In this... 

Process Variation is seen as statistical variations in leakage current and delay of transistors in nano-scale technologies. The amount of process variations increase as the size of transistors decrease by technology scaling such that those effects can be seen in frequency of MPSoC (Multi-Processor System-on-Chip) cores and their leakage power deviation. These variations cause the tasks duration and power consumption fluctuate in different processors in an MPSoC instance. Consequently, some chip instances of the same MPSoC may consume more time and power than their considered limitations. Hence considering the process variation is necessary and required for MPSoC optimization at different... 

Keratoconus is a progressive corneal illness that appears due to reduced thickness of cornea in some area. Normal cornea has semi sphere shape with uniform thickness from center of cornea to the limbus. However, keratoconic cornea’s shape becomes conic. One of the treatments in moderate state of keratoconus is implantation of IntraStromal Corneal Ring Segments( ICRS). Ring Segments are made of PMMA and inserted in 0/7- 0/8 of depth of cornea.In this study, before surgery data from 3 patient’s cornea images were prepared in order to 3D modeling of cornea, for importing to FEM software( ABAQUS). Material properties of cornea is considered hyperelastic second-order Ogden Model; elastic... 

With the emergence of a variety of surgical glues in the market and utilizing them in recent years, nowadays, based on the post-surgery studies, it has become transparent that there are additional factors, such as the long-term effect of surgical glues on tissue, to consider beyond the sealants ability to act as a mechanical barrier or a means to buttress friable tissue so that it can hold sutures. Mechanical properties of the surgical glues have especially a significant role in the applications that the tissue undergoes cyclic loading (such as arteries’ tissues). A mismatch between the mechanical properties of the tissue and the sealant can result in the remodeling of the artery that may... 

In this study, a novel multiscale analysis is proposed to utilize atomistic properties of crystalline nano-materials as an input to continuum problems in the range of large deformation. The main purpose of presented work is investigating the capability of different hyperelasticity models based on molecular statics (MS) and molecular dynamics methods to attain proper hyperelastic strain energy density function to illustrate atomistic information under various types of deformation loadings. Also, the proficiency of hyperelastic model is investigated for nano-structure including different percentages of voids. The material parameters of hyperelastic strain energy density can be obtained from... 

Inflatable packers have a great value in downhole operations due to their unique ability to expand to several times their initial diameter. These type of packers have a sealing element. This element is constructed of thin overlapped sheet metal ribs which are surrounding an inner tube. These overlapped ribs protect inner tube against the extrusion. The outer surface of this element covered by a layer of rubber. The outer elastomeric cover seals the annulus of the casing and isolates the zones in the well. In this study, some of the geometrical and material parameters effects on inflation and deflation of inflatable packers are investigated by numerical method. At first, for this purpose, the... 

In this study, a pioneer multiscale hierarchical molecular dynamics (MD) – finite element (FE) coupling method is proposed to illustrate the influence of large deformation on mechanical properties of heterogeneous nano-crystalline structures. The embedded-atom method (EAM) of many-body interatomic potential is applied to evaluate pairwise interactions between atoms in the metallic alloys with face-centered-cubic (FCC) lattice structure at room temperature. In addition, the Nose-Hoover thermostat is used to control the instability of temperature. A weight average between the lattice parameters of atomic structures is utilized in order to calculate the equivalent lattice parameter. The... 

Keratoconus is a progressive disease in which the cornea becomes thin and due to the presence of internal pressure in the eye and its application to the cornea, the cornea becomes bulging and conical. In recent years, due to the relatively large number of patients with keratoconus and also the ability of this disease to progress over time, the need to study and research on the treatment of this disease is noticeable. Early and non-surgical methods for the treatment of keratocous are use glass and contact lenses, but since the disease is progressive and usually appears more severely over time, ophthalmologists use the method of corneal ring implant for treatment.In this study, 9 types of... 

As a result of technology advancement in composite materials and the growth of analytical tools, applications of these materials is increasing in various industries, especially in aerospace industry. One of the structures developed using these materials is hybrid structure with composite/elastomer layering. Stress analysis and study of free-edge effect in this type of structures is possible by using three-dimensional elasticity in composite layers as well as nonlinear hyperelasticity in elastomeric layers, and this is the topic that this thesis deals with. The proposed approach to solving the problem is that the composite/elastomer hybrid structure is first analyzed by the finite element...