Sharif Digital Repository

In this project, two Ferrofluidic micropumps that do not need any mechanical moving parts are presented. These micropumps are including simple microchannels containing magnetic fluid plugs that are used as flow actuator and the on/off valve. Using external magnetic field actuation in this type of micropumps, the magnetic fluid would have continuous motion in a channel with micrometer dimensions that would provide the main fluid to be pumped. Although the plug of magnetic fluid has surface contact with operative fluid, but considering its specific features, it would not compine with the pumping fluid. These micropumps may be used to pump the fluids or gases. The outcomes of the investigation... 

Considering the advantages and disadvantages of reported micropumps, we aimed to introduce a novel idea to diminish the disadvantages and promote the advantages of Magnetohydrodynamic (MHD) micropumps. This novel idea operates based on a mercury slug rotation in a circular microchannel. This cyclic motion of the mercury slug which is similar to a piston, push the fluid in the microchannel and pump the flow. However, to bring this idea into the practice, it must be integrated with a specific valve. Fluid has not to go through this specific valve. In contrary, mercury slug has to pass across this valve. These two specifications must be considered during the design process of the valve. On the... 

The potential of phase change process in liquids at microscale has been a favorite for the scientists to fabricate this type of micropumps. To hold unidirectional flow in microchannels usually nozzle-diffuser arrangement is used. Due to the existence of difference in pressure drop in the nozzle and diffuser sections, one can see unidirectional flow through diffuser direction. The objective of this article is to analyze analytically the thermo-hydrodynamic behavior of the Isopropyl Alcohol (IPA) bubble of a phase change micropump. Considering the simultaneous effects of hydrodynamic and thermal characteristics of the bubble in the bubble generation chamber, and temperature-saturation... 

Considering the advantages and disadvantages of reported micropumps, we aimed to introduce a novel idea to diminish the disadvantages and promote the advantages of PiezoElectric micropumps. This novel idea operates based on a mercury slug actuation in a microchannel. This cyclic motion of the mercury slug which is similar to a piston, push the fluid in the microchannel and pump the flow. However, to bring this idea into the practice, a control system must be designed. This system contains: LABVIEW code, DAQ board & a switching Board. The pattern of actuating mercury is drawn in LABVIEW. DAQ Board produces electrical signals according to LABVIEW code. Switching board will transform the... 

First by reviewing some built micropumps, the importance of rotary magnetohydrodynamic micropump has been highlighted. Then some information about the performance and rules applied to these specific micropumps has been provided. Based on the research, the necessity of using transient flow relations for analyzing the procedure of these micropumps would become crucial. The next step would be extracting the information out of dimensionlessrelations of magnetohydrodynamic theory and dimension less equations of momentum in transientsingle-phase fluid flow which is moved by theoverall Lorentzforce in between 2 parallel surfaces. It would be done in two state of using constantcurrent source and... 

Design, fabrication and performance of the reciprocating micropumps with actuated fluid slug have been investigated. In these micropumps, pumping principle is based on reciprocating movement of a fluid slug. The fluid slug must be conductive in magnetohydrodaynamic micropump to be actuated by Lorentz force and have good magnetic properties in ferrofluidic micropumps to be actuated by an external magnetic field.
On the other hand, a theory is developed in ahead of design and fabrication process to diagnose the critical and the most influential parameters. Magnetohydrodynamic micropumps in 4 distinict design using nozzle-diffuser element, passive ball valve and active mercury valve have... 

As today's tremendous advance occurred in biotechnology and nanotechnology, the microfluidic devices made a new success that was not possible with the traditional equipments. It was useful in such a way that by using a microliter volume of that fluid, we could have the ability to use it in biologics, medicine, aerospace, cooling electronic systems and medical discovery. One of the main component of fluidic microsystems are micropumps in which they divide into two types. Reciprocating micropumps have been worked by stimulating electromagnetic micropumps which is based on Lorentz law. In this project, we try to investigate the impact of effective parameters in the movement of the mercury mass.... 

In this investigation Magneto Mercury Reciprocating Micrpump (MMRM) the combination of Magneto-Hydrodynamic and Reciprocating micropumps has been analyzed. To achieve the analytical and numerical solution of one-tank and three-tank MMRM, the momentum, continuity, volume fraction and magnetohydrodynamic equations have been presented. The dimensionless analytical solution of one-phase and two-phase three dimensional MHD flow in the condition of using constant current and potential electrical source, has been offered.
The boundary between mercury and air has been tracked via VOF method in OpenFOAM software. VOF equation has been solved by explicit method with variable time step and maximum... 

This thesis presents the prototype design and fabrication of magnetically actuated miniature pumps which utilize self-sealing capability of ferrofluid-covered permanent magnets in both pumping and valving mechanisms. The contactless external actuation feature of the design enables integration of the pump with other PMMA-based microfluidic systems with low cost and disposability. The body of the 1st fabricated prototype pump consists of three nozzle/diffuser elements and two pumping chambers connected to the ends of a flat-wall pumping cylinder. A cylindrical permanent magnet placed inside the pumping cylinder acts as a piston which reciprocates by using an external magnetic actuator driven... 

Micropumps are one of the most important devices in the field of microfluidics which have many applications in various fields of engineering. Electrostatic excitation is one of the types of excitation mechanisms in micropumps that is widely used in microelectromechanical systems due to its low power consumption and easier control. In this research, first, the physics of droplets on the surface studied, important dimensionless numbers and other factors influencing microfluidic phenomena are investigated. The effective parameters of the droplet motion and the mechanism of this motion are described. Besides, the phenomenon of electrowetting, one of the phenomena in the field of dynamics of...