Sharif Digital Repository

Ag / AgCl /TiO2 , 2 Ap / Ag / AgCl /TiO , 2 AgI /TiO and 2 Ap / AgI /TiO were prepared by the deposition-precipitation method on 2TiO (P25) nanoparticles and their photocatalyctic activities have been investigated under visible light and dark environments. Cationic surfactant plus 2 PVPI (topical solution and dry powder) as an iodine ion source and nonionic surfactant plus KI as an iodide ion source were used to prepar 2 AgI /TiO . In less than 30 minutes, 2 AgI /TiO which has been resulted from combination of cationic surfactant and 2 PVPI showed high efficiency on Escherichia coli under visible light when small quantities of it is used . However, AgCl sample prepared with cationic... 

Titanium dioxide has helped mankind to eliminate some viruses, bacteria and fungi due to its photocatalytic activity. Despite the unique properties of this semiconductor, the recombination of the produced electron hole pairs by UV is a restrictive factor of its photocatalytic efficiency. The doping of some noble metals and cations of transition metals with this oxide can increase its photocatalytic efficiency. In this research, palladium-modified TiO2 coating was prepared by using dip-coating method. The investigation of XRD spectrum demonstrated that 1%wt addition of Pd to TiO2 sol-gel solution results in a 16.1% decrease of Rutile phase, compared with TiO2 sol-gel solution which was not... 

The Dye-sensitizers loading on TiO2 is decreasing the electron excitation energy and therefore improving the photocatalytic performance from the increasing the sensitivity under visible light irradiation.in this project CoPCTS , Mordant dye and N3(Ruthenium 535) used as dye-sensitizers. Also The addition of VIII group metals on TiO2 is improving the photocatalytic activity that increasing the photocatalytic reaction rate because of the intermediation role of them for moving the conduction band electrons to electron acceptors and increasing the pair electron-holes long-life that in this case Pt loading used as a VIII group metal. In this project Titanium Isopropoxide as a precursore and... 

Recently, The interest of using the coherent and incoherent photons in chemical synthesis have been raised considerably. In this project, theoretical calculations due to investigation of irradiation’s effects on Fischer- Tropsch synthesis have done. Fischer – Tropsch synthesis is the process that converts synthesis gas, i.e. a mixture of carbon monoxide and hydrogen, in to a wide range of long chain hydrocarbons and oxygenates. We invest the first chapter of this project to introduce of Fischer- Tropsch synthesis and its importance. Following in the next chapter we have analyzed the photocatalyst in microscopic scale. In third chapter, we have claimed the necessary theories which are useful... 

In photocatalitic activity of titana an effective approach to achieve high charge separation efficiency and high level of sensitivity under visible light is coupling it with another semiconductor with smaller band gap and appropriate banding energy structure. achieving all mentioned above, we used bilayer structure and coupled TiO2 with hematite which its small band gap(Eg ~ 2.1 ev) is sensitive to visible light. Bilayer systems of TiO2/Fe2O3 , Fe2O3/TiO2 were fabricated by sol-gel process and variable parameter was upper layer thickness. The layers were deposited on glass substrate via sol-gel process. The upper layers were prepared in different thicknesses in two ways. First, they... 

In this project, TiO2 nanoparticles were prepared by the sol gel method. The band gap of TiO2 was modified with transition metal ions Pt, Pd, Ni. The kinetics and photocatalytic degradation of AB92 investigated. The effect of some parameters such as pH and amount of photocatalysis and calcination tempreture were examined. Also effect of transition metal increase on surface morphology and photocatalytic activity were investigated by XRD, BET, SEM, DRS and FT-IR Techniques. Dyes are an abundant class of colored organic compounds that represent and increasing environmental danger. Azo dyes are well-known carcinogenic organic substances. Advanced oxidation processes (AOPs) have been proposed as... 

Polyagent photocatalysts based on the zeolite including TiO2, Ag and AgBr prepared by Sol-gel method. Ag and AgBr prevent of electron-hole recombination and enhance photocatalytic activity. Prepared catalysts were characterized by different analysis method including XRD, SEM, EDX, FTIR and BET techniques. Catalyst activities were investigated from two aspects: in first step the activities of catalyst were investigated for degradation of AB92 dye. The effect of different factors such as: catalyst concentration, dye concentration, pH and scavenger (sodium thiosulphate) on efficiency and reaction rate were investigated. The optimazed values for all conditions specified, then catalyst activities... 

Titanium dioxide has covered a wide range of applications as a semiconductor photocatalyst. TiO2 is an indirect, 3.2 eV band gap semiconductor which can be stimulated using UV light. Improving the quick electron-hole recombination rate, we can enhance the photocatalytic efficiency of this semiconductor. One of the approaches in hand is to use noble metals in connection to TiO2. Among noble metals, due to its plasmonic and anti-bacterial properties and ease of preparation, silver would serve as a perfect candidate. The mechanism for photocatalytic enhancement in Ag-TiO2 structures lies behind the fact that silver can trap the photogenerated electron of TiO2 and inhibit the electron-hole... 

In this research, TiO2 nano-particles were electrophoretically deposited on the FTO glass to produce self-cleaning property. Two type of suspensions with different TiO2 nano-powders were used. Merck and fabricated by sol-gel route, TiO2 nano-powders were utilized in suspensions and Conductivity, pH and zeta potential of suspensions were determined. Electrophoretic deposition of two kind of suspensions was performed in different voltages of 10, 30 and 60V (for 10s) and room temperature. TiO2 coatings were sintered in 450oC for 1 hour. The phase transformation of TiO2 films were measured using XRD. Morphology, average particle size and thickness of TiO2 films were analyzed using FESEM... 

In this study magnetite nanoparticles were synthesized by microemulsion and were coated with TiO2 by a precipitation technique. The synthesize process were done under fixed molar ratio of various constituents of microemulsion and molar ratio of water to oil. Results of X-ray diffraction spectroscopy (XRD) showed that the uncoated nanoparticles were consisted of magnetite as the major phase and no other detectable phases such as pure iron or hematite were found. Field emission scanning electron microscopy (FE-SEM) results showed that the synthesized nanoparticles small size and narrow particle size distribution. For TiO2 coating process the effect of TBOT concentration, water concentration,... 

Textile industry wastewaters are one of the important sources of environmental contamination because they produce large quantities of highly colored effluents. In recent years, use of advanced oxidation processes by producing highly active and reactive components such as hydroxyl radicals has been proposed. In this study, two oxygenated photocatalytic systems including UV/ZnO and UV/TiO2 were examined for degradation of C.I. reactive orange 16 dye as a typical organic pollutant in textile effluents. A thin gap annular photoreactor was designed and applied for the experiments. The photoreactor provided large surface area exposed to UV light, where in the solution layer renewal on the UV... 

ZnO nano particles and mordnite zeolite nano particles were prepared by precipitation method and hydrothermal method,respectively. The influence of solvent and surfactant in ZnO nano particles synthesis were studied to reform the structure of nano particles.These nano particles were based on different supports to improve and enhance their photocatalytic activities. Synthesized catalysts characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform-infra red spectra (FTIR), UV-Vis spectroscopy and BET techniques. To investigated photocatalytic activity of the synthesized catalysts under UV irradiation, they were used to degradation bio-environmental... 

In this study, effect of chelate ligands containing carboxylic, phenolic, and amine functional groups on the synthesis of related-perovskite Ca2Fe2O5 versus perovskite CaFeO3 structures have been investigated. Herein, the application of chelating-agent method, e.g. EDTA, Citric Acid, NTA, malonic acid, maleic acid, catechol, acetylaceton, p-tert-butycatechol, aminophenolic derivative ligand, and 2-hydroxyiminodiacetic acid, in comparison to co-precipitation method was also undertaken. The crystalline structure of the obtained perovskites were compared with those of co-participation method in solid state. Experimentally, it was found that the related XRD bands for CaFeO3 were appeared in the... 

WO3 is known as a photocatalyst in the visible light region, but with lower efficiency compared to more interesting semiconductor photocatalysts such as TiO2 and ZnO. Many attempts have been done to increase the efficiency of this photocatalyst by incorporating metal and metal oxide nanoparticles or recently carbon nanotubes.On the other hand, application of graphene, as an unrolled carbon nanotube, for increasing the photocatalytic activity of TiO2 and ZnO has shown positive results. Furthermore, it was reported that such semiconductor photocatalysts (and very recently WO3) can photocatalytically reduce the chemically exfoliated graphene oxide sheets under UV-vis irradiation.
In this... 

In this study, TiO2-SiO2 nanocomposite films with different amount of SiO2 were prepared by sol-gel process and were coated onto stainless steel 316L. The effect of addition of various amounts of SiO2 in the precursor solution on the structure, morphology, photocatalysis, photo-generated hydrophilicity, self-cleaning property and mechanical properties of TiO2 thin films and corrosion behavior of AISI 316L stainless steel substrate, was investigated. For this purpose, X-ray diffraction, Fourier transform infrared spectroscopy, water contact angle measurements, UV spectroscopy, field-emission scanning electron microscopy, atomic force microscopy, depth-sensing indentation technique supporting... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

Apatite-coated Ag/AgBr/TiO2 was prepared by deposition of Ag as noble metal to generate electron-hole pairs by extending the excitation wavelength to visible light region, AgBr as photo-sensitizer to increasing yield of photo catalyst, and apatite as adsorption bio ceramic for adsorbing pollutants and micro organisms respectively. The bactericidal experiments in dark media indicated that only novel catalyst show inhibiting growth of bacteria. In this case Transmission electron microscopy image illustrated that catalyst nano particles adhere to the outer membrane of the cell and acts as inhibitor to nourish of bacteria from around media. The mechanism for deactivation E-Coli and B.Sub in the... 

Inthisresearch,silicananoparticleswere synthesized ymicroemulsionmethod. Thengadoliniumcarbonatewascoated onsilicananoparticles by depositiontechnique.After thatTiO2wascoatedbydeposition techniqueonsilica/gadolinium carbonatenanoparticles.The results of infrared spectroscopy (FT-IR) on silica/gadolinium carbonatesamples showed carbonate bonds. The results of X-ray diffraction (XRD) test on samples of silica/gadolinium carbonatethat had been calcined at 600 0C for 2 h, showed that silica and gadolinium carbonate phases are amorphous and with increasing calcination temperature, gadolinium oxide crystalline phase is formed. For TiO2 coatings process, the effect of TBOT concentration, the... 

In this study, the photocatalytic activity and hydrophilicity of coat improved using Nitrogen and Vanadium elements as dopant in TiO2 coating. By using vanadium and nitrogen elements and silica prelayer, a titania coating was deposited on the soda-lime glass substrate by sol-gel dip coating method to produce self-cleaning surface. XRD and FTIR analyses were done on the powders after heat treating at in 450˚C for 30 min. XPS analysis was done for investigation of N replacement in titania structure. The band-gap energy of formed anatase was derived using UV-Vis analysis. The coating morphology and thickness were also investigated by SEM. Hydrophilicity of coatings was determined by measuring... 

In this project photocatalysts TiO2, H3PW12O40, H3PMo6W6O40, H3PW12O40 / TiO2, H3PMo6W6O40 / TiO2, K2.5H0.5PW12O40, Cs2.5H0.5PW12O40, (NH4) 2.5H0.5PW12O40 and H3PW12O40 / M-TiO2 that M = La , Ce, Cr, Fe, Co were characterized by techniques DRS, FT-IR, BET, 31P NMR, SEM and XRD. The results of SEM and XRD particle size and page crystalline nanoscale catalysts, with size less than 40nm, respectively. FT-IR analysis confirmed the structure of heteropolyacid was produced. DRS analysis of the degradation reactions during wavelenght longer upheld. Degradation of methylene blue and pollutants such as Tinopal CBS-x to the polyoxometalates keggin is homogeneous and composite titanium dioxide two...