Loading...

Analysis, Design, and Fabrication of Coplanar Waveguide to Substrate Integrated Waveguide

Ahmadian, Arman | 2012

565 Viewed
  1. Type of Document: M.Sc. Thesis
  2. Language: Farsi
  3. Document No: 42957 (05)
  4. University: Sharif University of Technology
  5. Department: Electrical Engineering
  6. Advisor(s): Rejaei Salmasi, Behzad; Sarvari, Reza
  7. Abstract:
  8. An important issue in High-Frequency circuits is the transmission of electrical signals in Integrated Circuits and Printed Circuit Boards (PCBs). At high frequencies, however, the often used transmission lines suffer from high conductor and substrate loss as well as unwanted electromagnetic coupling to other circuit elements caused by parasitic substrate surface. One method through which both of the above problems may be solved is utilizing waveguide structures on PCBs and ICs. In this way, due to the reduction of conductor loss, a large proportion of signal passes easily. Moreover, and because of closed nature of cavity waveguides, neighboring circuits are protected against electromagnetic coupling. This method, although plausible at first glance, brings about the problem of connection of waveguide components to other circuit elements which are located on the wafer surface and generally use transmission lines for transmission of microwave signals. This connection between transmission lines and waveguide must be designed in such a way as to minimize the reflection (maximize the power delivered) and at the same time introduce negligible loss. The subject of this thesis is the design of transitions between substrate integrated waveguides and planar transmission lines, which, considering the sensitivity of design in terms of transmission of a maximum amount of signal, is critically important. Design is carried out in HFSS and a sample of design has been fabricated on PCB. CPW probe measurements have been carried out which, for a back to back transition configuration, demonstrate over 50 % bandwidth at -13 dB return loss
  9. Keywords:
  10. Substrates ; Waveguides ; Losses ; Coupling ; Transition

 Digital Object List

 Bookmark

  • چکیده:
  • فهرست مطالب:
  • فهرست جدول‌ها:
  • فهرست شکل‌ها:
  • فصل اول: مقدمه
    • تاریخچه‌ی موجبرها در الکترونیک بسامد رادیویی
    • مطرح شدن مدارهای سطحیِ4F بسامدِ رادیویی بر اساس خطوط انتقال
    • مقایسه‌ی موجبرها و خطوط انتقال
    • تلفیق ساخت سطحی با موجبری
    • موجبرهای زیرلایه‌ای سطحی
    • ناحیه‌ی گذار20F
  • فصل دوم: موجبرهای زیرلایه‌ای
    • خطوط انتقال هم‌صفحه در فناوری مدارچاپی
    • موجبرهای سطحی سازگار با فناوری مدارچاپی
    • موجبرهای زیرلایه‌ای سطحی در فناوری مدارمجتمع
      • ساختار
      • تلفات و تشعشع
  • فصل سوم: کارهای انجام شده در زمینه‌ی نواحی گذار بین موجبرها و خطوط انتقال
    • نواحی گذار ساخته شده برای فناوری مدارچاپی
      • ناحیه‌ی گذار اول
      • ناحیه‌ی گذار دوم
      • ناحیه‌ی گذار سوم
    • نواحی گذار ساخته شده برای فناوری مدارمجتمع
      • ناحیه‌ی گذار اول
      • ناحیه‌ی گذار دوم
      • ناحیه‌ی گذار سوم
  • فصل چهارم: طراحی و تحلیل
    • مؤلفه‌های عرضی میدان‌ها
    • تحریک مودال موجبر با یک منبع جریان مغناطیسی دلخواه
    • نظریه‌ی تصاویر
    • تحلیل ساختار ناحیه‌ی گذار
  • فصل پنجم: شبیه‌سازی
    • ناحیه‌ی گذار برای فناوری مدارچاپی
    • ناحیه‌ی گذار برای فناوری مدارمجتمع؛
  • فصل ششم: ساخت و اندازه‌گیری
  • فصل هفتم: نتیجه‌گیری
  • منابع و مأخذ:
  • پیوست (الف) ثابت‌های فیزیکی
  • پیوست (ب) باندهای فرکانسی مایکروویو
  • پیوست (ج) موجبرهای استاندارد
  • پیوست (د) اثبات کامل رابطه‌ی تحریک مودال موجبر
  • پیوست (ه) برخی محاسبات تحلیلی فصل چهارم
  • پیوست (و) برخی محاسبات عددی فصل چهارم
  • Abstract
  • Sharif University of Technology
...see more