Loading...
Solvent Extraction of Indium from PlS Solution Produced of Zinc Concentrate Leaching
Mobaraki Moghaddam, Mahya | 2015
2042
Viewed
- Type of Document: M.Sc. Thesis
- Language: Farsi
- Document No: 47987 (07)
- University: Sharif University of Technology
- Department: Materials Science and Engineering
- Advisor(s): Yoozbashizadeh, Hossein
- Abstract:
- Indium is one of the most important metals in electronics and nuclear industry with increasing demand. The most important application of Indium is in the preparation of thin films containing this metal in LCD manufacturing, television, laptops, monitors and CD players. Indium is a rare metal and it has not original mineral. The most important source of it is zinc minerals and regularly obtained from processing by-products of this minerals. The main problem of production of Indium is the simultaneous presence iron ions in the solution of dissolved minerals of zinc. In this project, extraction of Indium from acidic pregnant leaching solution of roasted zinc concentrate contained at less than 65 ppm Indium by solvent extraction with organophosphorus extractants was studied under different conditions. The case study variables were inclusive: The type of organic solvent, pH of the aqueous phase and ratio of aqueous phase to the organic phase that using experimental design and modeling of complex design, the influence of parameters on the recovery of Indium and Indium-Iron separation factor determined and then optimum condition were determined. The optimum conditions for recovering Indium and Indium-Iron separation factor are: pH=1.4, the ratio of aqueous phase to the organic phase 3 and the combined use of the D2EHPA and TBP simultaneously. In this conditions, recovery of Indium was 97.7% and Indium-Iron separation factor was 681.17%.The separation factor is very favorable in comparison to previous research because it utilizes the synergistic effect of extraction on the project
- Keywords:
- Synergistic Effect ; Acidic Solution ; Solvent Extraction ; Indium Compounds ; Leaching
-
محتواي کتاب
- view
- تصویبنامه
- به نام خدا
- دانشگاه صنعتي شريف
- دانشکده مهندسی و علم مواد
- پایاننامه کارشناسي ارشد
- 1- فصل اول ( مقدمه)
- 1-1- ایندیم
- 1-1-1- کشف ایندیم
- 1-1-2- ویژگیهای ایندیم
- 1-1-2-1- خواص فیزیکی
- 1-1-2-2- خواص شیمیایی
- 1-1-2-3- ویژگیهای سمشناسی زیستمحیطی
- 1-1-3- ترکیبات
- 1-1-4- کاربرد
- 1-1-5- بررسی اقتصادی (تولید، عرضه، تقاضا، مصرف و قیمت)
- 1-1-6- کانیها
- 1-1-7- منابع ایندیم
- 1-1-7-1- منابع اولیه
- تولید از مدارهای روی
- 1-1-7-2- منابع ثانویه
- 1-1-7-3- ذخایر ایندیم در ایران
- 1-2- استخراج حلالی
- 1-2-1- اصول کلی
- 1-2-2- اصطلاحات و پارامترها
- 1-2-3- مکانیزمهای استخراج
- 1-2-4- تکنیکهای استخراج
- 1-1- ایندیم
- 2- فصل دوم (مروری بر منابع)
- 3- فصل سوم (روش پژوهش)
- 3-1- روش پژوهش
- 3-1-1- مواد اولیه و مصرفی
- 3-1-2- تجهیزات
- 3-2- مشخصه یابی نمونهها
- 3-2-1- پراشسنجی پرتوی ایکس
- 3-2-2- پلاسمای جفتشده القایی
- 3-3- نحوه انجام آزمایشها
- 3-3-1- آزمایش تشویه
- 3-3-2- آزمایشهای حلسازی
- 3-3-2-1- حلسازی مرحله اول
- 3-3-2-2- حلسازی مرحله دوم
- 3-3-2-3- آزمایشهای ترسیب انتخابی ایندیم
- 3-3-2-4- حلسازی مرحله سوم
- 3-3-3- استخراج با حلال آلی
- 3-4- طراحی و تحلیل آزمایشها با استفاده از روش طراحی آزمایش
- 3-4-1- استراتژی طراحی آزمایشها
- 3-5- روش شناسایی رویه پاسخ
- 3-1- روش پژوهش
- 4- نتایج و بحث
- 4-1- بازیابی ایندیم
- 4-1-1- نتایح طراحی و تحلیل بازیابی ایندیم
- 4-1-2- بهینهسازی
- 4-2- فاکتور جدایش ایندیم و آهن
- 4-2-1- بهینهسازی
- 4-1- بازیابی ایندیم
- 5- نتیجهگیری و پیشنهادها
- 5-1- جمعبندی مطالب و نتیجهگیری
- 5-2- پیشنهادها
- منابع و مراجع
