Sharif Digital Repository

Technology Identification involves developing a list of technologies which are, or may be, incorporated into products or processes. After reviewing Technology Assessment, Technology Strategy, Management of Technology and New Product Development in literature, four methods of Technology Identification are investigated: Value Chain of Technologies, Process-based Approach, Quality Function Deployment and Technology Mapping. A model facilitating decision making process is then proposed by which the most appropriate method to be employed is identified. The proposed model is examined in specific case of fuel cell technologies while preparing the Fuel cell Development Strategic Plan of Iran. 1... 

An improved and efficient method for the synthesis of 1- & 5-substituted 1Htetrazole derivatives was described in the presence of nano-ordered MCM-41-SO3H as an effective heterogeneous catalyst. This metal-free protocol, [2 + 3] cycloaddition of sodium azide to various nitriles or ethyl N-phenyl formimidate intermediate under mild reaction conditions, provides a wide range of 1H-tetrazoles in good to excellent yields. The catalyst was reused five times without significant loss of catalytic activity. © 2019 Sharif University of Technology. All rights reserved  

An improved and efficient method for the synthesis of 1- & 5-substituted 1Htetrazole derivatives was described in the presence of nano-ordered MCM-41-SO3H as an effective heterogeneous catalyst. This metal-free protocol, [2 + 3] cycloaddition of sodium azide to various nitriles or ethyl N-phenyl formimidate intermediate under mild reaction conditions, provides a wide range of 1H-tetrazoles in good to excellent yields. The catalyst was reused five times without significant loss of catalytic activity. © 2019 Sharif University of Technology. All rights reserved  

In the present study, a novel strategy based on particle motion mode is introduced to control the manipulation process of a bio-particle using trolling mode atomic force microscope. To achieve this goal, the reduced governing partial differential equations and the standard form of the system are used as a model for the system dynamic behavior. The governing equations take 6 degrees of freedom into account including extension, torsion, and two lateral bendings of the microcantilever as well as two lateral bendings of the nanoneedle. Manipulation process of the 500 nm radius particle on the substrate includes two phases named sticking and sliding. Sticking of the particle to the substrate... 

In this paper, a confined infill panel previously experimented under out-of-plane loading is modeled and analyzed by the dynamic explicit method (DEM). This method is shown to have a good estimation of the experimental results, and is thus adopted to investigate the out-of-plane behavior of an infill model. Based on the analytical results, the stress distribution of an infill panel prior to and after cracking, and the effect of an arching mechanism on post-cracking behavior, is studied. A semi-empirical relationship is accordingly developed for predicting the transverse resistance of masonry infills due to one-way arching action, which accounts for the effects of the boundary frame... 

Pulsating heat pipes (PHPs) are interesting heat transfer devices. Their simple, high maintaining, and cheap arrangement has made PHPs very efficient compared to conventional heat pipes. Rotating closed loop PHP (RCLPHP) is a novel kind of them, in which the thermodynamic principles of PHP are combined with rotation. In this paper, effect of rotational speed on thermal performance of a RCLPHP is investigated experimentally. The research was carried out by changing input power (from 25. W to 100. W, with 15. W steps) and filling ratio (25%, 50%, and 75%) for different rotational speeds (from 50. rpm to 800. rpm with an increment of 125. rpm). The results presented that at a fixed filling... 

In this paper, we report that a known dinuclear Fe complex, [tpa(H2O)FeOFe(H2O)tpa](ClO4)4 (tpa: tris(2-pyridylmethyl)amine), is an efficient catalyst toward organic sulfide oxidation in the presence of urea-hydrogen peroxide  

Indoline-2-thiones (5) were applied as 1,3-dinucleophiles in a tandem reaction with Baylis-Hillman adduct acetates (4) to give novel tetrahydrothiopyrano[2,3-b]indole skeletons (6). The effect of different solvents, bases, and catalysts on the yields and stereochemical outcome was studied in detail. The results indicated that acetonitrile as solvent and K 2CO3 as base, under reflux conditions, were the optimum conditions. Products 6a-6l were obtained in high diastereoselectivity and yield (up to 94%)  

Particulate VC-reinforced high-manganese austenitic steel matrix composites with different vanadium and tungsten contents were synthesized by conventional alloying and casting route. Microstructural characterizations showed that the composites processed by in situ precipitation of the reinforcements were composed of V8C7 particulates distributed in an austenitic matrix. It was observed that addition of tungsten to austenite increases work-hardening rate of subsurface layer during pin-on disk wear test. The maximum abrasive wear resistance was achieved at tungsten content equal to 2 wt pct. However, excessive addition of tungsten promoted the formation of W 3C phase and reduced the abrasive... 

In this study the ability of artificial neural network (ANN) in forecasting the daily NASDAQ stock exchange rate was investigated. Several feed forward ANNs that were trained by the back propagation algorithm have been assessed. The methodology used in this study considered the short-term historical stock prices as well as the day of week as inputs. Daily stock exchange rates of NASDAQ from January 28, 2015 to 18 June, 2015 are used to develop a robust model. First 70 days (January 28 to March 7) are selected as training dataset and the last 29 days are used for testing the model prediction ability. Networks for NASDAQ index prediction for two type of input dataset (four prior days and nine... 

Holding companies are one of the most important structures that fulfil goals related to stable economic development. Managerial processes are among the most important functions of a holding company's headquarters. The aim of this study is to present a comprehensive framework for management technologies in holding companies. The presence of an appropriate framework can assist holding companies confronted with existing complexities in various supporting tools of managerial processes which are continuously expanding. The presented framework can be an initial stage for formulating a management technology strategy in holding companies. This framework has been applied in the processes of... 

Management Technologies Strategy formulation (MTS formulation) in holding companies is carried out with the aim of achieving competitive advantages in the market and fulfilment of strategic goals of the corporation. This paper presents a modified technology strategy formulation model for MTS in holding companies. Prior to present an integrated model of MTS formulation, a number of technology strategy formulation models are analysed and their suitability for the headquarter of a holding company is discussed. Through a case study research method, the paper documents how MTS formulation was implemented in an Iranian conglomerate tasked with managing diversified subsidiaries. We concluded that... 

In this investigation, in-situ precipitation of vanadium carbides was employed to reinforce Fe-13Mn and Fe-13Mn-3W alloys by means of conventional melting and casting route. Microstructures were characterized by optical and scanning electron microscopy techniques.Mechanical properties of the materials were determined by hardness, impact toughness and tension tests. It was observed that tungsten improved the strength of the matrix and the reinforcements as well as tensile properties and work hardening rate of the VC-reinforced composite. Ball mill abrasion test was utilized to simulate impact-abrasion wear condition using two types of abrasive minerals. The results showed that the degree of... 

The reaction of 2-chloroquinoline-3-carbaldehydes with indoline-2-thione in ethanol provides a series of novel indolo[3′,2′:5,6]thiopyrano[2,3-b]quinoline derivatives. The desired products were obtained in short reaction time and high yields (69-93%) under mild reaction conditions. © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim  

Using stochastic point source and finite fault modeling, the stochastic stress drop is estimated for 52 large shallow earthquakes listed in the 'Pacific Earthquake Engineering Research Center (PEER) Next Generation Attenuation of Ground Motions (NGA)' database. The Pseudo Spectral Acceleration (PSA) of 541 accelerograms, recorded at National Earthquake Hazards Reduction Program (NEHRP) C-class sites from 52 earthquakes are simulated and compared with the PSA listed in the PEER NGA database. The magnitude of the analyzed earthquakes ranged from M4:4 to M7:6. The stress drop is calibrated by trial and error and based on the analysis of residuals where the residual is defined as the log of the... 

Tabriz has experienced several large destructive historical earthquakes in the past. Due to the absence of ground motion records in this area, a simulation of future events based on a regional seismicity information and ground motion model is necessary. Based on a maximum likelihood method, earthquake magnitude is estimated for a 10% probability of exceedance within 50 years (475-year return period) and its corresponding strong ground motions have been simulated using stochastic finite fault modeling. Using different stress parameters, suites of ground motions have been simulated for a return period of £75 years and their spectral accelerations have been compared with the corresponding... 

In this study, high-vanadium austenitic manganese steel (HV-AMS) alloys and the standard Hadfield steel were investigated. The microstructure of these high-vanadium alloyed Hadfield steels was studied thoroughly using optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) and was compared to the Hadfield steel. The hardness and unnotched Charpy impact strength of HV-AMS alloys and Hadfield steel were examined at ambient temperature in the as-cast and heat-treated conditions. A pin-on-disk wear test at linear speed of 10. m/min and a 55. N normal load was employed to evaluate the wear behavior of both steel samples. Microstructural results showed that varying... 

Inkjet-printing (IJP) technology is recognized as a significant breakthrough in manufacturing high-performance electrochemical energy storage systems. In comparison to conventional fabrication protocols, this printing technique offers various advantages, such as contact-less high-resolution patterning capability; low-cost, controlled material deposition; process simplicity; and compatibility with a variety of substrates. Due to these outstanding merits, significant research efforts have been devoted to utilizing IJP technology in developing electrochemical energy storage devices, particularly in supercapacitors (SCs). These attempts have focused on fabricating the key components of SCs,... 

In this paper a new least mean square (LMS) based adaptive weighting algorithm is proposed. It is appropriate for antenna array systems with moving targets and mobile applications. The essential goal of this algorithm is to reduce the complexity of weighting process and to decrease the time needed for adjusting the antenna radiation pattern. The main lobe of antenna will be adjusted in the direction of desired signal (main signal) and nulls pointed in the direction of undesired signals (interference signals). By predicting the relative velocity of source, the next location of the source will be estimated and the array weights will be determined using LMS algorithm before arriving to the new... 

Reducing the computational complexity as well as convergence time is the main task of adaptive antenna array processing. This article proposes an improved algorithm for estimating the weights of adaptive array elements based on Constant Modulus Algorithm (CMA). In this new type of algorithm, those weights that have higher effect on the radiation pattern will be estimated and antenna pattern will be adjusted by changing these weights. In this research, 3 new algorithms are proposed. By simulating these algorithms and comparing them with conventional full weight CMA, finally new algorithm that has a reduced complexity and an acceptable performance at different signal to noise ratios (SNRs) is...