Sharif Digital Repository

Interface shear strength between soil and structural materials is dependent on the confining pressure. To increase the confining pressure, different methods of reinforcement and materials, such as carbon-fiber-reinforced polymer (CFRP) can be used. The shear strength of CFRP-improved soil is dependent on the interface properties of the soil and CFRP. The objective of this study is to investigate the interface properties (friction angle and adhesion) of sand and FRP experimentally using the direct shear test apparatus. To increase the surface roughness to improve the interface properties, a layer of sand was placed on saturated carbon fiber during the curing period [spark plasma sintering... 

Many concrete structures such as bridges, offshore structures, and pavements are under cyclic loads when they are exposed to different environmental conditions during their lifespan. The durability and fatigue performance of these structures are significant issues that should be considered. Therefore, this study investigated the long-term environmental effects on Polymer Concrete (PC) and Ordinary Cement Concrete (OCC) subjected to cyclic fatigue loading under four different environmental conditions (freshwater, seawater, acidic and alkaline) for six months. Concrete specimens are tested under high cyclic loading with the frequency of 6 Hz and low cyclic loading with a frequency of 1 Hz.... 

Soils are usually weak in tension therefore different materials such as geosynthetics are used to address this inadequacy. Worldwide annual consumption of geosynthetics is close to 1000 million m2, and the value of these materials is probably close to US$1500 million. Since the total cost of the construction is at least four or five times the cost of the geosynthetic itself, the impact of these materials on civil engineering construction is very large indeed. Nevertheless, there are several significant problems associated with geosynthetics, such as creep, low modulus of elasticity, and susceptibility to aggressive environment. Carbon fiber reinforced polymer (CFRP) was introduced over two... 

In this article, a novel passive control system, ribbed bracing system (RBS), has been proposed to deal with the buckling problem. RBS is a bracing system with a simple mechanism that can be installed in braces as a supplemental part. The behavior of RBS is similar to that of conventional braces under tensile loading. However, under compressive force, it endures an insignificant force and prevents the braces from buckling through length reduction. In addition, seismic damage is concentrated in the bracing system of the structures equipped with RBS, decreasing the dissipated hysteretic energy in other structural members. There are two different mechanisms for RBS: 1) completely-closed RBS... 

This research investigates the flexural behavior of a polymer concrete beam/pile encased with carbon fiber sleeve. The mechanical properties of carbon fiber sleeves in tension and cement and polymer concrete in compression were determined. Polymer concrete beams were tested in flexure to determine the bending moment capacity. Then, the test results were compared to the theoretical model results. Finally, a parametric study was conducted to determine the influence of beam/pile parameters on the capacity of the element. Based on the investigation, carbon fiber sleeve filled with polymer concrete exhibits outstanding structural performance including ductility and bending capacity. © 2017 Taylor... 

This research investigates the flexural behavior of a polymer concrete beam/pile encased with carbon fiber sleeve. The mechanical properties of carbon fiber sleeves in tension and cement and polymer concrete in compression were determined. Polymer concrete beams were tested in flexure to determine the bending moment capacity. Then, the test results were compared to the theoretical model results. Finally, a parametric study was conducted to determine the influence of beam/pile parameters on the capacity of the element. Based on the investigation, carbon fiber sleeve filled with polymer concrete exhibits outstanding structural performance including ductility and bending capacity  

In this article, the ribbed bracing system is proposed and evaluated through experimental and numerical studies. Ribbed bracing system is composed of a supplemental part with ribbed interfaces that is attached to a brace member and allows for its free length reduction to prevent the development of compressional forces responsible for buckling of the brace. Ribbed bracing system provides two different mechanisms: completely closed ribbed bracing system and improved-centering ribbed bracing system which are validated, in this study, through design, fabrication, and testing of small-scale specimens subjected to cyclic quasi-static loading. As verified by the test results, in improved-centering... 

In this investigation, seismic behavior and design coefficients of the ribbed bracing system (RBS) are evaluated by considering various archetypes that reflect configuration variability. RBS is a lateral bracing system with a unique mechanics that prevents buckling-induced damage by allowing free deformation of brace under compression. After successful experimental validation and numerical evaluation of RBS specimens in previous studies, FEMA P695 methodology is adopted in this study to subject 48 archetype structures to incremental dynamic analysis (IDA) procedure. Evaluation of the probabilistic collapse capacity of the archetypes against the code requirements reveals that RBS system can... 

The overall behavior of rammed earth (RE) as a low embodied energy construction method can be enhanced by using stabilizers. Several studies have been performed on cement and lime stabilized RE. However, studies on other additives, especially the sustainable ones, are limited. In this research, the effect of stabilizers including cement, pozzolan, microsilica, fiberglass, guar gum and phase change material (PCM) was evaluated on the performance of RE mixtures. The mixtures were assessed by considering the durability, shrinkage, thermal conductivity, mechanical properties and their sensitivity to the humidity. Then, the correlations were determined between the mechanical properties and the... 

In recent years, pozzolana are being increasingly used in different types of concretes and mortars. This investigation aims to evaluate the effect of replacing 7, 14, 21, and 28% cement (by weight) with silica fume (SF), granulated blast furnace slag (GBFS), zeolite, and fly ash (FA) under elevated temperatures. Forty mix designs were built with various water-to-cement ratios and plasticizers. Three hundred and six specimens were prepared, and the flexural, uniaxial compression and tensile tests were performed on specimens after exposure to elevated temperatures between 25°C and 900°C. The X-ray diffraction (XRD) test was then performed on the two series of specimens. Accordingly, the...