Sharif Digital Repository

In order to study the interaction of sloshing and structural vibrations of baffled tanks a reduced order model based on modal analysis of structure model and boundary element method for fluids motion is developed. For this purpose the governing equations of elastic structure and incompressible flow used to derive simple models to simulate both fields. Using the modal analysis technique the structural motions are applied to the fluid model and on the other hand by using boundary element method the fluid loads are applied to the structural model. Based on this formulation a code is developed which is applicable to an arbitrary elastic tank with arbitrary arrangement of baffles. Results... 

In this thesis, isothermal and reactive low swirl flow are investigated using the large eddy simulation (LES) method. In contrast to high swirl burner, in low swirl burner stability mechanism is not related to central recirculation zone and a detached flame stabilizes in a place where the flow velocity and flame speed are matched. Although lots of efforts have been devoted to simulate swirl flow, much of the previous simulations investigated high swirl flow in different configurations. The current research is conducted for co-annular swirl flow, isothermal low swirl flow and reactive low swirl flow. Simulation of co-annular swirl flow is performed to investigate the performance of... 

The actual flow stream through compressor is 3D and fluctuated because of complicated geometry, fluid viscosity and high velocity. Therefore, more accurate analysis of this kind of flow, it is better to use 3D model. Nowadays the flow modeling software are able to model and analysis flow regime using numerical methods in three dimensions. Using these software allow us to find the ways which can reduce the energy losses to improve compressor efficiency.In current work, based on 3D numerical analysis, the flow regime in a centrifugal compressor is investigated and also the sensitivity of this analysis with mesh sizing is explored. The k-e type RNG model is used for modeling turbulent behavior... 

In this thesis, lock-exchange density currents are investigated using the dynamic large eddy simulation (LES) method. These are flows that occur under the influence of gravity and density gradient. In the lock-exchange type currents, a bulk of heavy fluid is released under an ambient lighter fluid. One charachteristic of such flows is the presence of turbulence at different scales across flow and Kelvin-Helmholtz and lobe and cleft instabilities at the interface, which additionally act to complicate the matter. Although lots of efforts have been devoted to simulate density currents, much of the previous simulations have used Reynolds Average Navier-Stockes (RANS) methods. Practically, these... 

An offset jet refers to a flow issuing above a wall offset by a distance h and parallel to the axis of the jet. Asymmetric entrainment on both sides of the jet causes the jet to deflect toward the plate. The flow field of an offset jet is complex and is encountered in many engineering applications. For instance, burners, boilers, combustion chambers and fuel injection system are strongly governed by the behavior of offset jets. The understanding of the flow field properties of offset jet is required to ensure the proper design of systems.
In this study the mean flow and turbulent properties of 3D offset jet with circular nozzle, developing in a stagnant environment, are studied by means... 

Long memory in assets return is important on the theoretical as well as the practical aspects and since it is a special form of nonlinear dynamics, in this study an ARFIMA model was used with the aim of considering the long memory in the return conditional average of automobile industry index. Then, due to the observation of ARCH effects, the simultaneous conditional average modeling and turbulences in the automotive industry index return using an ARFIMA-FIGARCH model was considered in the residuals of the best fitted model and results were that for modeling the returns and turbulences of automobile industry stocks which has a special long memory, FIGARCH will provide better and more... 

Time series of asset returns display specific regularities such as bell-shaped distribution, leptokurticity and volatility clustering. Economists have made continuous efforts to develop models that explain these patterns and can be used to predict the return and the risk of holding an asset. These efforts can be classified into 3 eras: Bachelier Era (1900-1960) in which the random walk model was developed for speculative prices. Mandelbrot Era (1960-1980) in which the normality assumption was replaced with the Pareto-Levy family of distributions which are flexible enough to justify leptokurticity and infinite variance. And finally, the Dynamic Volatility era in which the focus was on... 

Aims: Stars twinkle because their light propagates through the atmosphere. The same phenomenon is expected at a longer time scale when the light of remote stars crosses an interstellar molecular cloud, but it has never been observed at optical wavelength. In a favorable case, the light of a background star can be subject to stochastic fluctuations on the order of a few percent at a characteristic time scale of a few minutes. Our ultimate aim is to discover or exclude these scintillation effects to estimate the contribution of molecular hydrogen to the Galactic baryonic hidden mass. This feasibility study is a pathfinder toward an observational strategy to search for scintillation, probing... 

Density currents as a particular form of stratified fluid motion in nature have attracted the interest of many researchers in the past decades. These flows are formed whenever a fluid with specific density begins to move through another fluid with different density called ambient fluid. Prediction of propagation of turbulent density currents, especially because of their remarkable influence on the environment, is one of the researcher’s interests in geophysics and engineering. Density currents have a lot of applications in industry and nature. Sand storm in deserts, turbidity currents in oceans and avalanches are natural examples and leakage of dense gas into the atmosphere due to reservoir... 

Complex systems are composed of a large number of subsystems behaving in a collective manner. In such systems, which are usually far from equilibrium, collective behavior arises due to self-organization and results in the formation of temporal, spatial, spatio-temporal and functional structures. The dynamics of order parameters in complex systems are generally non-stationary and can interact with each other in nonlinear manner. As a result, the analysis of the behavior of complex systems must be based on the assessment of the nonlinear interactions, as well as the determination of the characteristics and the strength of the fluctuating forces. This leads to the problem of retrieving a... 

The demand for safety operating systems is growing with the new developments in technology. One of the important and critical issues in system monitoring is the capability of the system to detect probable faults and hazards. In model-based fault detection one specific diagnostic signal called residual should be generated for each fault that is only sensitive to a particular fault and independent of other faults and disturbances. In this thesis we try to investigate the nonlinear geometric approach in fault detection of a class of mechanical systems. After a brief introduction to geometric tool for nonlinear inputaffine systems and conditions in which output is decoupled from input, we... 

In This thesis, the behavior of flow inside the pressure-swirl atomizers is studied. The pressure-swirl atomizers are widely used in many industrial applications such as fuel injection in gas turbine, internal combustion engine and liquid-fuel rocket, spray drying, spray in firing and agricultural nozzles.The flow simulation inside the pressure-swirl injector deals with many complicated considerations due to air core formation in the axial zone of the injector as well as high tangential and axial velocities in the swirl camber. The ANSYS Fluent commercial program is used for simulations. The two phase flow inside the injector is modeled by volume of fluid method (VOF) using large eddy... 

in this study, turbulent natural convection inside an air filled square cavity with several hot and cold internal bodies in the range of Rayleigh numbers between 1010 and 1012 has been investigated numerically. Vertical walls of the enclosure have been considered isothermal and horizontal walls are insulated in all cases. An appropriate arrangement of internal bodies in which the minimum heat transfer occurs is desired. For this purpose, two dimensional Reynolds-averaged Navier-Stokes equations have been solved with the finite volume discretization method in a staggered grid. In addition, two equation high-Reynolds-number model with standard wall functions is used to simulate the... 

In this thesis, sloshing of a rectangular container with perforated baffle is being analysed. Employing the linear sloshing theorem, we construct an accurate numerical and analytical approximation of natural sloshing mode in rectangular container with perforated baffle. Two dimensional irrotational flow of an ideal incompressible liquid is assumed. Finally the dissipated energy is being measured and equal viscous damping was calculated. So the perforation in which the damping is being maximized is determined and finally the results being compared with some experimental and analytical results from journal paper  

In this study the interaction of sloshing and structural vibrations equations in tanks are investigated and developed. For this purpose the governing equations of structural dynamics and potential flow are used and a reduce order model for fluid is derived. Three methods are used for external forces calculation of structural dynamics model which are the sloshing fluid, quiescent fluid and lumped mass. Then free vibrations of coupled system for launch vehicle with two tanks is investigated. The results of this study are compared and validated with existent results in the literature and finally the effects of fluid height in tank, tank thickness and parameters of launch vehicle like... 

Biotechnology is one of the fields that has had great advances in the past decades, and therefore controlling biological processes (bioreactors) is considered as an important issue. The purpose of current thesis is designing an adaptive controller for a bioreactor by considering input constrain and proving the stability of closed loop. A standard bioreactor has been chosen for this purpose. First a non-adaptive controller has been designed. Then an adaptive controller is designed and implemented on a bioreactor in the presence of input constraint, because in practice the system parameters are unknown. Finally by applying disturbance to the system, it has been shown that the proposed control... 

Considering atmospheric wave propagation as a complex phenomenon, it can be represented as a function of variety of parameters such as: properties of atmosphere, boundary conditions, surface characteristics, source related parameters and etc. the aim of this work is to study the propagation of sound mechanisms in troposphere layer and numerical simulation of sound field in order to investigate the wind effect and turbulence in wave propagation. In this manner, the Green’s function parabolic equation (GFPE) is hired to solve the governing equation for sound propagation in a moving inhomogeneous atmosphere. To achieve this, a code is generated using MATLAB software to predict the long range... 

One of the risk factors of financial assets is liquidity. Identifying factors affecting liquidity helps us to predict stock liquidity and to control the risk of investing. The purpose of this research is to identify these factors in Tehran Stock Exchange. We use the data of 48 companies between1388 and 1392. Our results show that the liquidity follows a weekly and a monthly cycle. Stock return, market return, stock return volatility, market return volatility and trading volume are among the factors which affect stock liquidity. In addition, the reaction of liquidity changes to positive or negative stock return is asymmetric, and the effect of negative stock return is more influential. Our... 

Present research focuses on providing a reasonable solution for separation control through arrays of discrete wall jets. In this thesis, quasi-radial wall jet actuators have been introduced and theirs application in separation control (boundary layer control) have been investigated for the first time. This study includes two phases. The first phase is dedicated to investigation of physics and functional nature of wall jet actuators. In this phase, using numerical simulations, wall jet actuators in different situations have been studied and it was shown that arrays of quasi-radial jets have better performance than arrays of three-dimensional jets in creating a combine two-dimensional wall... 

In this thesis, We propose and test a method for controlling the size of nanoparticles, which plays a fundamental role in their electrical, optical, and mechanical properties. The method utilizes turbulent mixing, and is applicable to the fabrication of any type of nanoparticle that uses a solution environment in the preparation process. We show by well-controlled experiments on the CdS nanoparticles, which are semiconducting materials, that the average size < d > of the particles decreases with Reynolds number Re. To gain a deeper understanding of the phenomena reported here, we have carried out molecular dynamics simulations of the processes. In second investigation, We provide a simple...