Sharif Digital Repository

According to the reported field experiences, excess water production from high permeable thief zones of oil reservoirs is the main source of severe operational problems and economic issues. Application of Preformed Particle Gels (PPGs) is an effective technique to overcome this problem. Static test analysis is a primary method for evaluating the performance of PPGs material at different conditions of pH, salinity, etc. However, the effect of the presence of oil and rock on the kinetics of swelling/de-swelling of PPGs is not well understood. Also, considering the vast field application of Co_2-based oil recovery methods, it is interesting to study the effect of carbon dioxide gas on swelling... 

Today, energy has a great impact on the economy, political relations, prosperity, and lifestyle of human societies. Energy sustainable development has become inevitable because of factors such as increasing population growth and as a result, increasing the energy consumption, consuming more energy from fossil fuels, decreasing in reserves of fossil fuel resources, environmental damage caused by the burning down of fossil fuels and greenhouse gas emissions,high cost of energy from burning fossil fuels.Generally, the sustainable development isall steps in order to comply with economic development and protecting the environment, resources and living standards. Considering that a large part of... 

Optimizing and improving the design of wells will have significant impact on any recovery method. As for horizontal wells, despite the fact that horizontal wells improve reservoir access, they suffer from significant pressure loss as well as limited flow control locations and flow control and management. In addition, reservoir quality varies along the length of the well and in the reservoir. This will add further complexity and challenge in well control and production optimization. The design of completions plays a significant role in improving the productivity of a well as well as the life of the reservoir. Intelligent or smart completions can be used to monitor, evaluate and manage the... 

Water flooding is known as a common method to maintain reservoir pressure/enhance oil recovery. The major problem in this process induced from inorganic deposits that caused formation damage around wellbore region. It is due to incompatible nature of injected and formation water which results in permeability reduction and well productivity decrease. Solving this problem is an important issue in the petroleum industry. BaSO4, CaSO4 and SrSO4 are inorganic sediments formed in this process. The physical model of water transport in reservoir and scaling damage due to sediments contains at least two dominant parameters; the kinetics coefficient that specifies the velocity of chemical reaction,... 

An important step in the early stages of an oilfield development is the accurate identification of the location of production and injection wells which has a significant impact on productivity and profitability of the reservoir. Recently, operation companies in petroleum industry focus on production optimization, recovery enhancement and cost reduction; as a result, application of non-conventional wells (NCW) or non-vertical wells have dramatically increased. Well placement optimization is a complicated task as it is a function of several contributing factors including reservoir heterogeneities and economic constraints. The complexity of this task increases when it is considered as a... 

At the early stages of production, oil reservoirs may have enough energy to push the oil from the reservoir into the wellbore and subsequently from the wellbore to the surface. When the reservoir energy is too low for the well to flow, or the production rate desired is greater than the reservoir energy can deliver, using some kind of artificial lift method to provide the energy to bring the fluid to the surface, seems to be necessary. Continuous flow gas lift is one of the most common artificial lift methods widely used in the oil industry during which, at appropriate pressure, gas is injected in a suitable depth into the tubing to gasify the oil column, and thus assist the production. Each... 

Sodium Hydroxide production industry is among the largest chemical industries that annually produces 66 million tons worldwide. NaOH which is produced through electrochemical cells needs to be further enriched. The use of membrane technology as a substitute for conventional processes has been a point of interest. Thin film composite membrane is among favorable membrane because of its ability to be customized layer by layer individually. In this thesis, for the purpose of making an optimized membrane for NaOH enrichment, we studied the preparation conditions and witnessed that by increasing MPD from 1.5 %wt. to 4.5%wt. The flux experiences a minimum at 3.5%wt, which is the maximum for... 

Constant drilling in the shale formation causes many problems such as shale swelling and well instability. Annually many costs are spent dealing with these problems in the drilling industry. Many factors can affect this issue. The most important factor is the type of drilling fluid and its additives. The use of oil-based mud is the best option to deal with the clays instability but, due to environmental problems resulting from OBM, their use has been banned in most parts of the world. Therefore, the water-based mud is the only option for the oil industry that can modify its property by use of additives. In this study, the muds contain Nano silica have been introduced. Silicate as shale... 

Water coning is a complex phenomenon that depends on various parameters which include among: production rate, matrix and fracture permeability, perforation interval, aquifer size, mobility ratio, capillary pressure, etc. Production of water can greatly affect the productivity of a well and the reservoir at large volume. In naturally fractured reservoirs, this problem is more complex because permeability of the fractures in the porous media is too high. With this complexity of water coning behavior in naturally fractured reservoir, this phenomenon was studied by simulating a sector of a carbonate fractured reservoir supported by an aquifer using Eclipse-300 simulator. A sector of an Iranian... 

Transportation of cuttings and efficiency of the hole cleaning has been one of the major concerns of stake holders in the oil and gas industry.This is because a successful drilling program is a key to a productive and profitable oil and gas business. A successful drilling program is as a result of an efficiently cleaned hole. On the other hand, a poor or inefficient hole cleaning implies accumulation of cuttings or formation of cuttings bed in the well. This often leads to decreased rate of penetration, increased cost of drilling, fractured formation, increased plastic viscosity of mud as a result of grinding of cuttings and stuck pipe. Hole cleaning is effected primarily with a drilling... 

Since the early 90s, nanotechnology has contributed to several developments in a wide range of Science and industry such as medicine, Physics, Chemistry, Aerospace, electronics and Biology. In recent years, nanotechnology has also made development in the oil and gas industry. The drilling fluid is already one of the most important parts in drilling operation.The physical properties of a mud, rheological properties and minimize fluid invasion into the formation with perfect mudcake are important to assist in optimizing results. Nano-materials as one of the achievements of recent years are effective in achieving these purposes. To obtain the above properties, a variety of polymers as... 

Fines migration due to their severe problems during oil production must be controlled. They cause the productivity decline due to their deposition near the well bore. Recently, application of nanotechnology in fine migration control has been much attended in both experimental and field case investigations. The main goal of the present study is to find out the ability and different effects of Nano particles (NPs) such as concentration, types and even the magnetic sensitivity to retain fines migration. In order for this, two groups of tests were conducted by engineered porous media. In this study, for the first time, an experimental setup was designed and constructed to investigate the control... 

At building industry and other construction industries concrete process can be named as the most important part of making structure process, it is important because concrete is responsible of bearing compressive stress at the structure, and most of concrete quality depends on the curing after concreting. Concrete operation at the structure causes using other sciences like heat transfer science to increase the concert quality. Since freezing phenomenon causes serve decrease at concrete quality and the only way is destruction and repeating concreting which is very hard and sometimes impossible and also using chemical additive to decrease freezing point decreases quality and also is... 

Dump trucks are one of the most important and valuable equipment used in mining, and the implementation of proper maintenance and monitoring programs for these machines is of special significance. The most critical part of a dump truck is its diesel engine, and the most effective method for monitoring its condition is to conduct lubricant analysis. Accuracy and speed in the lubricant analysis process significantly contribute to enhancing the efficiency of maintenance and monitoring programs for the equipment. Given the complexities of analyzing the condition of diesel engines in dump trucks due to the interactions among multiple engine parameters and various lubricant characteristics, there... 

Bearings play a critical role in the functionality of rotating equipment across various industries, accounting for approximately 50% of equipment failures due to bearing malfunctions. Accurate life prediction of bearings is essential not only for preventing unexpected breakdowns and subsequent damage but also for minimizing unnecessary replacements of functional bearings, which can lead to increased operational costs. With the rise of artificial intelligence, numerous predictive models have been developed; however, many of these require extensive datasets, which are often unavailable in industrial settings. Data collection is typically irregular, based on the sensitivity of the equipment,... 

Energy efficiency in desalination systems is primarily hindered by high-energy-consuming equipment, such as compressors. This study explores a novel cycle of combined ejector desalination involving a two-phase state and a solar vacuum tube collector designed to generate saturated steam at a lower temperature. The mechanism involves water entering the ejector's primary nozzle in the liquid phase, pulling steam generated by the collector at a reduced pressure and temperature. This process facilitates the separation of desalinated water from saltwater, resulting in purified water in a variable phase. The performance of the ejector was thoroughly evaluated, including how primary and secondary... 

Today, reliability assessment of production systems is crucial for ensuring continuous production and minimizing operational and maintenance (O&M) costs. One way to assess reliability at the system level is to create a reliability block diagram (RBD) and estimate the failure rates of equipment over their operational periods. This approach has been utilized in this thesis, focusing on assessment of the reliability of various units within the methanol plant at Khark Petrochemical Complex. In this context, understanding the condition of the equipment criticality is essential for constructing the reliability block diagram. The Crespo model and total criticality per risk (CTR) measure have been... 

Introducing the basic concepts of solar desalination systems, improving the performance and efficiency of the solar system under vacuum has been investigated. Further, according to the classification of the types of solar desalination systems, the details of their existing designs have been discussed. The solar desalination system under vacuum is classified into two types of solar systems under natural vacuum and under forced vacuum. The solar system under natural vacuum is divided into one-story and multi-story, while the solar system under forced vacuum is classified into two types, single-effect and multi-effect. Previous studies as well as the most important recent developments in this...