Sharif Digital Repository

According to the reported field experiences, excess water production from high permeable thief zones of oil reservoirs is the main source of severe operational problems and economic issues. Application of Preformed Particle Gels (PPGs) is an effective technique to overcome this problem. Static test analysis is a primary method for evaluating the performance of PPGs material at different conditions of pH, salinity, etc. However, the effect of the presence of oil and rock on the kinetics of swelling/de-swelling of PPGs is not well understood. Also, considering the vast field application of Co_2-based oil recovery methods, it is interesting to study the effect of carbon dioxide gas on swelling... 

Today, energy has a great impact on the economy, political relations, prosperity, and lifestyle of human societies. Energy sustainable development has become inevitable because of factors such as increasing population growth and as a result, increasing the energy consumption, consuming more energy from fossil fuels, decreasing in reserves of fossil fuel resources, environmental damage caused by the burning down of fossil fuels and greenhouse gas emissions,high cost of energy from burning fossil fuels.Generally, the sustainable development isall steps in order to comply with economic development and protecting the environment, resources and living standards. Considering that a large part of... 

The produced crude oil from the petroleum reservoirs usually has a value of brine (water and salt) this matter can be caused the corrosion of refinery equipment. The large part of this brine creates a stable emulsion with oil, that it couldn't be separated easily. For separation and demulsification of this emulsion, some chemical, mechanical, thermal and electrical methods can be executed. In chemical method, demulsifier materials can be added to water-in-oil emulsion. Different parameters such as properties of oil, type and concentration of demulsifiers, volume factor of water and etc., can affect the efficiency of water-in-oil emulsion separation. In this study, emulsification mechanism,... 

Optimizing and improving the design of wells will have significant impact on any recovery method. As for horizontal wells, despite the fact that horizontal wells improve reservoir access, they suffer from significant pressure loss as well as limited flow control locations and flow control and management. In addition, reservoir quality varies along the length of the well and in the reservoir. This will add further complexity and challenge in well control and production optimization. The design of completions plays a significant role in improving the productivity of a well as well as the life of the reservoir. Intelligent or smart completions can be used to monitor, evaluate and manage the... 

Water flooding is known as a common method to maintain reservoir pressure/enhance oil recovery. The major problem in this process induced from inorganic deposits that caused formation damage around wellbore region. It is due to incompatible nature of injected and formation water which results in permeability reduction and well productivity decrease. Solving this problem is an important issue in the petroleum industry. BaSO4, CaSO4 and SrSO4 are inorganic sediments formed in this process. The physical model of water transport in reservoir and scaling damage due to sediments contains at least two dominant parameters; the kinetics coefficient that specifies the velocity of chemical reaction,... 

An important step in the early stages of an oilfield development is the accurate identification of the location of production and injection wells which has a significant impact on productivity and profitability of the reservoir. Recently, operation companies in petroleum industry focus on production optimization, recovery enhancement and cost reduction; as a result, application of non-conventional wells (NCW) or non-vertical wells have dramatically increased. Well placement optimization is a complicated task as it is a function of several contributing factors including reservoir heterogeneities and economic constraints. The complexity of this task increases when it is considered as a... 

At the early stages of production, oil reservoirs may have enough energy to push the oil from the reservoir into the wellbore and subsequently from the wellbore to the surface. When the reservoir energy is too low for the well to flow, or the production rate desired is greater than the reservoir energy can deliver, using some kind of artificial lift method to provide the energy to bring the fluid to the surface, seems to be necessary. Continuous flow gas lift is one of the most common artificial lift methods widely used in the oil industry during which, at appropriate pressure, gas is injected in a suitable depth into the tubing to gasify the oil column, and thus assist the production. Each... 

In past two decades, the direction of oil and gas exploration has moved towards deep water drilling. The pressure and temperature in these zones are ideal for gas hydrate formation that can cause serious and sometimes uncontrollable issues during drilling operations. Gas hydrate formation while drilling can cause problems such as occurrence of kick and blowout, plug chock and kill line, and change in rheology of drilling mud. On the other hand, nowadays, nanotechnology has created an evolution in engineering sciences and because of the wide range of this science, drilling industry is affected like other industries. In the meantime, because of high yield, high stability and various methods of... 

Sodium Hydroxide production industry is among the largest chemical industries that annually produces 66 million tons worldwide. NaOH which is produced through electrochemical cells needs to be further enriched. The use of membrane technology as a substitute for conventional processes has been a point of interest. Thin film composite membrane is among favorable membrane because of its ability to be customized layer by layer individually. In this thesis, for the purpose of making an optimized membrane for NaOH enrichment, we studied the preparation conditions and witnessed that by increasing MPD from 1.5 %wt. to 4.5%wt. The flux experiences a minimum at 3.5%wt, which is the maximum for... 

Constant drilling in the shale formation causes many problems such as shale swelling and well instability. Annually many costs are spent dealing with these problems in the drilling industry. Many factors can affect this issue. The most important factor is the type of drilling fluid and its additives. The use of oil-based mud is the best option to deal with the clays instability but, due to environmental problems resulting from OBM, their use has been banned in most parts of the world. Therefore, the water-based mud is the only option for the oil industry that can modify its property by use of additives. In this study, the muds contain Nano silica have been introduced. Silicate as shale... 

Water coning is a complex phenomenon that depends on various parameters which include among: production rate, matrix and fracture permeability, perforation interval, aquifer size, mobility ratio, capillary pressure, etc. Production of water can greatly affect the productivity of a well and the reservoir at large volume. In naturally fractured reservoirs, this problem is more complex because permeability of the fractures in the porous media is too high. With this complexity of water coning behavior in naturally fractured reservoir, this phenomenon was studied by simulating a sector of a carbonate fractured reservoir supported by an aquifer using Eclipse-300 simulator. A sector of an Iranian... 

Transportation of cuttings and efficiency of the hole cleaning has been one of the major concerns of stake holders in the oil and gas industry.This is because a successful drilling program is a key to a productive and profitable oil and gas business. A successful drilling program is as a result of an efficiently cleaned hole. On the other hand, a poor or inefficient hole cleaning implies accumulation of cuttings or formation of cuttings bed in the well. This often leads to decreased rate of penetration, increased cost of drilling, fractured formation, increased plastic viscosity of mud as a result of grinding of cuttings and stuck pipe. Hole cleaning is effected primarily with a drilling... 

In this research, absorption and oxidation catalytic scenarios were examined using previous studies in the field of SO2 removal. Nanostructures zeolite 13X, 5A zeolite, gamma alumina and activated carbon were purchased, then structure, function and adsorption isotherm of each adsorbent were evaluated in 5 concentrations of 250, 500, 750, 1000 and 1250 ppm of contaminants. Final results showed that zeolite 13X compared to other Nano-adsorbents has higher ability to SO2 absorption, and thus the final tests such as temperature and pressure evaluation were performed on the selected sorbent. To further evaluation, the absorbent curves based on two models of BDST (Bed depth service time) and... 

Since the early 90s, nanotechnology has contributed to several developments in a wide range of Science and industry such as medicine, Physics, Chemistry, Aerospace, electronics and Biology. In recent years, nanotechnology has also made development in the oil and gas industry. The drilling fluid is already one of the most important parts in drilling operation.The physical properties of a mud, rheological properties and minimize fluid invasion into the formation with perfect mudcake are important to assist in optimizing results. Nano-materials as one of the achievements of recent years are effective in achieving these purposes. To obtain the above properties, a variety of polymers as... 

Fines migration due to their severe problems during oil production must be controlled. They cause the productivity decline due to their deposition near the well bore. Recently, application of nanotechnology in fine migration control has been much attended in both experimental and field case investigations. The main goal of the present study is to find out the ability and different effects of Nano particles (NPs) such as concentration, types and even the magnetic sensitivity to retain fines migration. In order for this, two groups of tests were conducted by engineered porous media. In this study, for the first time, an experimental setup was designed and constructed to investigate the control... 

This is a Computational Fluid Dynamics research on delivering drugs to cancerous tumors, by encapsulating drug particles within ferromagnetic particles and exposing them to an external magnetic field. The study explores the impact of the magnetic field on the efficacy of drug delivery, and whether it can enhance the drug concentration while reducing side effects. For creation of the geometry of the tumor, image processing techniques on a tumor image was used, which allowed for the construction of a network of tumor vessels based on the images. The desired results were then achieved by coupling the magnetic field with the flow of the magnetic fluid and the movement of particles. The research... 

Thermosyphon heat pipes are vacuum-sealed two-phase heat transfer devices, commonly called vertical or inclined heat pipes without wicks under the influence of gravity. They comprise a sealed, evacuated tube partially filled with a working fluid. The lower section of the tube serves as the evaporator, where heat input causes the liquid to vaporize. This vapor moves upward to the condenser, where it releases heat and condenses back into liquid form, and the condensed liquid returns to the evaporator by gravity. The adiabatic section, which is located between the evaporator and condenser, is well insulated to allow the vapor to pass through with minimal heat loss. These systems utilize the...