Sharif Digital Repository

The ability to predict the remaining life of bearings is one of main aspects for improvement of reliability of bearings. However, techniques to predict the lifetime of a bearing under the practical operating conditions have not been well developed. In this thesis, prognostic model for bearing systems based on vibration response analysis is considered as a single-degree-of-freedom vibratory system. As the bearing system is considered as a single-degree-of-freedom vibratory system, its acceleration amplitude at the natural frequency can be related to the system stiffness. Moreover, the relationship between failure lifetime, running time and stiffness variation can be established from the... 

PD detection can be done using on-line or off-line methods. Online PD detection methods have several advantages; such as: increasing system reliability, outage time reduction and higher safety. This method doesn’t need any special high voltage source. When on line monitoring is carried out for PD measurement, the noises in the environment and the electromagnetic interference (EMI) make it difficult to detect the PD signal. Therefore de-noising should be employed to filter out the interferences involved in the detected signal. In this thesis wavelet transform is introduced for this purpose. In this method, the background noise in the site of measurement is recorded as a reference noise to be... 

The leads with heavy current passing through the covering plates, and the winding in a transformer, are sources of eddy current losses. Due to this loss some regions of tank wall are subject to serious local overheating. It affects the safety and reliability of this expensive bject and power delivery.Heavy current in large power transformers and special type transformers give rise to a concentrated passage of eddy currents which in turn cause high local losses and overheating in the metallic parts especially in the steel tank walls of transformer.This local overheating is dangerous for transformer oil and the solid insulations. Therefore the calculation of losses and proper design of... 

The Dye-sensitizers loading on TiO2 is decreasing the electron excitation energy and therefore improving the photocatalytic performance from the increasing the sensitivity under visible light irradiation.in this project CoPCTS , Mordant dye and N3(Ruthenium 535) used as dye-sensitizers. Also The addition of VIII group metals on TiO2 is improving the photocatalytic activity that increasing the photocatalytic reaction rate because of the intermediation role of them for moving the conduction band electrons to electron acceptors and increasing the pair electron-holes long-life that in this case Pt loading used as a VIII group metal. In this project Titanium Isopropoxide as a precursore and... 

Determination of ultimate bearing capacity of shallow foundations has been discussed since long time ago in many books and papers. Although this is not generally a new problem, there are still some problems which may be interesting to be investigated in detail using suitable computer programs and by application of appropriate soil models. Comprehensive surveys on bearing capacity coefficients of different foundations have been done by utilizing FLAC software. The failure of soil is governed by the Elasto-Plastic Mohr-coulomb criterion. New graphs and equations have been developed for determining the coefficients. The equations achieved in this study by numerical methods, have been compared... 

Rolling element bearings are the most widely used components in rotating machinery and so, estimation of their remaining useful lifetime in order to increase the reliability and availability of them is a critical issue in the field of condition monitoring of these machinery. Despite numerous researches which have tried to develop a model for precise prediction of rolling element bearings’ lifetime, there is no method which can predict their remaining lifetime exactly. The failure criterion in these components is the area of defect in their races and rolling elements. Consequently, an approach which can predict the defect area of these components is susceptible to prediction of their... 

In this study biological denitrification method by moving bed biofilm reactor is investigated. The main advantage of MBBR reactor is due to their capacity for high removal rates and low operational problems such as clogging. Two MBBRs in series with 3 liter volume each, were designed in experimental set up and used in this research. Nitrification reactor worked under aerobic conditions and denitrification reactor operated under anaerobic conditions. Methanol was used as carbon source in the reactors throughout the study. Fifty percent of each reactor volume was occupied with KMT1 packing. To finding the optimum nitrate loading rate, the concentration of ammonium and nitrate were changed from... 

According to the environmental lows and standards, wastewater of petroleum industries such as refineries and petrochemical that include many petroleum compounds like aromatic and aliphatic hydrocarbons, must be treated up to desirable limit, before entering the collecting network. Using microorganisms is one of the fundamental ways of biodegradation of these polluted compounds. Since phenolic compounds are the main components of raw petroleum, strains that are capable of tolerating phenol and usage of this poisonous hydrocarbon are specifically important. Therefore, in this study the potentiality of the indigenous thermophilic bacterium Nocardia otitidiscaviarum strain TSH1, for degradation... 

Fe-29Ni-17Co alloy with commercial name “Kovar” is an alloy with low expansion coefficient. The main specification of this alloy is to maintain this property at the high temperatures that is used in sealing of glass-metal. Achieving to desirable physical properties associated with suitable mechanical properties is the purpose of related industries. However the effect of cold work and heat treatment was studied on the physical properties of this alloy, there is no report about the effect of the hot work. Thus, in this investigation, the effect of the hot work on the physical and mechanical properties of Kovar was studied. At first, slabs of Kovar alloy were cast and remelted. Then,... 

In a deregulated environment of power distribution industry, a comprehensive economic evaluation for the implementation of distribution automation systems is inevitable. It plays a key role in enabling distribution companies to achieve their business goals. In this thesis, a dynamic economic evaluation is presented to provide a comprehensive perception of automation intensity level and investment plan, for maximizing the utility profit and obtaining the desired payback period. Using the presented methodology in this thesis and system dynamics approach, it is efficiently possible to deal with variation of the economic parameters such as the interest rate, inflation rate, energy supply cost,... 

The electric power industry is experiencing important changes brought about by the deregulation. Electric power generators and users engage in power transactions which take place over the transmission system and create losses. Transmission losses represent up to 1⎯5% of the total generation, and cost millions of dollars per year. Consequently, the problem of “who should pay for losses” arises and the satisfactory sharing of the transmission system utilization costs among all market participants has become a key issue. Unfortunately, losses are expressed as a nonlinear function of line flows, and it becomes almost impossible to calculate exactly the losses that are incurred by each generator,... 

The main aim of this thesis is to develop a mathematical model for vibration analysis of cracked rotors. This model should be a simple and precise model for prediction of the cracked rotor vibration behavior and suitable for vibration control. In order to create such model, the pure bending of a cracked beam is analyzed at first. This analysis is performed for two different orientations of the crack with respect to the beam and the bending vector. In this section a continuous bending model with continuous model for crack is developed which can predict the full deformation of the cracked beam in bending and can estimate the stress distribution in the beam with good approximation. Comparison... 

Effect of utilizing Central Beam Column (CBC) structure on shallow, large span underground spaces excavation is studied. The CBC method focuses on increasing the overall rigidity of tunnel supporting system prior to full face excavation, in which central drift excavation is limited to the dimensions of the central beam and column to reduce disturbances. Constructing the central beam and column structure, the excavation is completed with NATM excavation method in a symmetric manner about centerline. In CBC method on each side of the centerline there is an arch structure composed of the initial lining resting on roof beam on top and bottom beam at the invert. The roof and bottom beams take the... 

Hough transform is frequently used in radar applications. The structure of using this transformation in radars is so that it has been used only in Range radars which transmit short pulses and their primary goal is to make better estimation of the range of the targets. In this work, we introduce the ways in which we can use the Hough transform in Doppler radars which transmit long pulses and their primary goal is to make better estimation of target doppler. We must use Hough transform in time-doppler domain for this class of radars including continuous-wave radars. To prepare this time-doppler domain image some time-frequency transform must be applied to the radar received signal and a part... 

In today’s competitive world, productivity is one of the main components that guarantee the success and profitability of an industry or a project. This research has studied productivity of dam construction projects in Iran that are usually classified as mega projects. First, the major factors influencing productivity of dam construction projects in Iran were identified and evaluated. Three main sources of information namely; literature review, records and lesson learned from previous projects and experts’ opinions were used to identify these factors. Then, 41 main factors influencing productivity were selected and the effect of each factor was measured based on the results obtained from... 

In power system operation, the term "operation planning" carries a wide range of meaning. For some utilities, operation planning denotes primarily short-term planning tasks (up to several days), such as load forecasting, unit commitment, hydro-thermal coordination, transaction pricing, fuel allocation, and security analysis while for other companies operational planning is interpreted in a wider context, and include mid-term planning activities (up to several months), such as maintenance planning, fuel budgeting, rate forecasting, network planning, relay coordination, etc. The mid-term planning provides the link between the long-term and short-term planning programs. The duration of this... 

Nowadays, pile usage in construction of deep foundations has increased significantly, instead of shallow foundation in areas that shallow foundations doesn’t provide enough bearing capacity and measuring the velocity and acceleration due to pile driving is very important. Because, all responses of building and individuals located near the pile driving site influenced by these three parameters: pile vertical displacement, peak particle acceleration (PPA) and peak particle velocity (PPV). One can estimates these important parameters by numerical analysis of pile driving process in different distances and depths to determining the effect of pile driving. Compared values obtained from numerical... 

mazandaran cement co.( the second biggest cement company in Iran) is located in Mazandaran province north of Iran. Thesis is about the weakness and strength points of available maintenance strategy (which is mostly CBM) in this company and offers some remedies to enhance the current maintenance situation. Maintenance information is assessed over a period of two years in a row and turn into some informative charts and diagrams for easier exploration. Eventually, some solutions are suggested for omitting shortages in current maintenance strategy  

Rolling bearings are important parts in rotating machinery. Unsuitable practice of this bearing causes unsuitable output in this collection. In some machines like helicopters, sudden faults of this rolling bearing cause body dangers. According to this point, diagnose of bearing fault is an important case in condition monitoring domain. There are many ways for diagnose of fault in bearing which most of them are important subject in signal processing. In this project first of all, the most important and applicable signal processing methods, which are useful in diagnose of fault in bearings are introduced then three of these methods are chosen and applied on time signals of experimental...