Sharif Digital Repository

In this thesis, the behavior of cold-form steel (CFS) frames equipped with various configurations of steel sheathing and K-shaped braces is experimentally investigated. Low lateral resistance is the main deficiency of the CFS shear walls. Despite their advantages, such as being lightweight, ease of fabrication, and an environmentally friendly system, their lack of adequate lateral strength prevents engineers from widely using them, especially in areas with medium to high seismicity or in mid-rise buildings. In this regard, a total of seven full-scale specimens with different configurations of steel sheathing and k-braced, with and without cladding, were tested to investigate their seismic... 

In this thesis, some aspects of the Burges and Kardar-Parisi-Zhang (KPZ) equations will be studied. At first we introduce Turbulence and describe historical view of Burgers and KPZ equations. Then in second section we study analytically the time issue of Burgers equation in 1+1-dimenssion. Then by using recently developed precise numerical methods by J. Bec and U. Frisch, we check result of previous section numerically. Our numerical simulation of the Burgers equation stirred by a kicking force support our analytical results. In small time scale our result show dynamical exponent of structure function z is one. This is the essence of the assumption first made by Sir G. I. Taylor in his 1938... 

The electrons scatter by the impurities during propagation through the media and become localized by increasing the impurities. So the metal insulator transition occurs. This phenomenon was first proposed by W. Anderson and is known as Anderson Localization. In this thesis the Anderson localization of electromagnetic waves is investigated. The disordered media with random dielectric constant is studied by considering Maxwell’s equations. There are different numerical methods to study this phenomenon such as transfer matrix method and level statistics we have used in this thesis. In three dimension, different scaling behavior shows the phase transition from localized states to extended states... 

In this thesis we would like to investigate structural disorder of Graphene and its effect on electronic properties. Graphene is a one-layer crystal of Carbon atoms which was the first two dimensional crystal observed experimentally. Low energy current carriers on Graphene behave like mass-less Dirac fermions and this interesting electronic property attracts much attention on studying Graphene. Structural disorder of Graphene highly affects its electronic properties. We study thermal fluctuations of Graphene sheet, disorder super lattice, and static ripples, as structural disorders of Graphene. Disorders due to thermal fluctuations of graphene induce a disordered gauge field on the graphene... 

H2S is a toxic gas used in chemical laboratories and industries. H2S is also liberated in nature due to biological processes and also from mines and petroleum fields. At some threshold level, exposure to concentrations over 10 ppm can result in headaches, irritability, dizziness and in some case leads to death. So that introducing sensors which sense H2S at ppm level with the low response time is so essential. The present work emphasizes on H2S resistance-sensing properties of pure and Pd doped WO3 films prepared by Arc discharge method. XRD, SEM, EDAX and XPS were applied to analyze crystal structure, morphology and chemical composition of the films. The analyzes results showed that films... 

On the average, ten thousand people die annually due to earthquakes. A UNESCO study gives damage losses amounting to ten billion dollars within the years 1926 to 1950 from earthquakes. These data shows the importance of earthquake issue that causes the scientists to pay special attention to this subject. In despite of significant improvements in many of scientific fields, earthquake is still remains as an unknown event without the possibility of predicting its time and location of occurrence. Because of that, a large effort has been paid for rehabilitation of structures to prevent the human loss and maintaining the necessary life safety. In this regard, various guidelines have been proposed... 

The growing requirements for renewable energy production lead to the development of a new series of systems, including wave and tidal energy conversion systems. Due to their sensitivity and the impact of the aggressive marine environment, the selection of the most adequate location for these systems is a major and very important task. Several factors, such as technological limitations, environmental conditions, administrative and logistic conditions, have to be taken into account in order to support the decision for best location. The aim of the present study is to provide an Atlas of IRAN Offshore Renewable Energy Resources (hereafter called ‘the Atlas’) to map out wave and tidal resources... 

Stabilizing periodic orbit of fractional order chaotic system via linear state feedback is the subject of this research. Firstly, for detection of the unstable periodic orbits (UPO) in fractional order chaotic systems, the famous shooting method for integer order systems is extended to fractional order systems. After that, for stabilizing the fractional order system a hypothesis is stated and a theorem is proved in a specific condition. Besides the proven theorem, some examples are presented as evidences that verify the hypothesis. So, through the hypothesis, common methods for stabilizing integer order systems can be extended to the fractional order systems. Finally, for stabilizing the... 

In recent decades the Due to development of coating techniques and the diversity of high organic matter, Discussion of organic coating materials being raised. Moreover, because of many applications of organic thin film in electronic and optical systems for example OTFTs and OLEDs Organic thin film growth topic is very interesting for scientists. Among these, some scientists study the theory and another bunch of scientists pay to practical aspects of this topic. In this thesis I pay to the theoretical level of Organic thin film growth and I simulate the system includes a collection of molecules, Went on to study some statistical properties of the system will be discussed and the dynamic... 

In this thesis we study the dispersion of one-dimensional scalar waves in a random media. We used the finite difference method to obtain the numerical solution of wave equation in this media. Then we were able to find wave signals for different disorder intensities and at different distances from the source. Using the Wavelet Transform, intresting features such as phase and group velocity can be studied. The Morlet function is used as the mother wavelet for decomposing the signals at different places. Cross-correlation functions of Wavlet transforms of the signals at different positions are used to obtain phase velocity and its dependence on frequency. We show how the phase velocity at the... 

Strongly correlated electron systems are an interesting topic among condensed matter systems. The electrons in such systems are strongly correlated to each other in a way that the behavior of the systems cannot be described by single particle theories. One of the most famous of these systems are heavy fermionic materials which are called so due to heavy quasi particles mass.
This kind of materials have been investigated via different methods. The most im-portant model that can describe characteristics of these materials is Kondo lattice model. When we are only interested in magnetic properties of them, the model can be reduced to Kondo-necklace model which only involves with spin degrees... 

Variable speed wind turbines (VSWTs) provide the capability of wide speed operation and independent control of active and reactive power. In contrast to the fixed speed WTs, they have higher efficiency, power quality and controllability. VSWTs are mainly divided in two categories: WTs based on doubly fed induction generator (DFIG) and WTs based on full converter with permanent magnet synchronous generator.
At now, among the different alternatives to obtain VSWTs, DFIGs are the most commonly used. This is because the voltage source converter (VSC) in DFIG has to handle a fraction of the total power under steady state conditions, and thus the size and cost of the converter is reduced.... 

Nowadays, with high performance computers and progress in video recorder devices and their related technologies, price of these devices is being balanced and recording the videos is conventional now. Processing of these videos has been a challenge in industry and science. Control and surveillance of places such as airports and roads and reducing their sizes in memory are some of their research area. Usually one of the initial preprocesses of such applications specially the object tracking is background modeling and background subtraction. This preprocess has an essential effect on the other algorithms that process based on these processes’ results. If this section conducted with fewer... 

Tehran is one of the most polluted megacities in the world, and based on different studies, vehicular sources are responsible for most of the criteria pollutant emissions in this city. The number of vehicles on the streets has been increased drastically leading to growing amount of emission and this trend is continuing. In order to reduce the amount of vehicular emission, it is vital to investigate the factors affecting vehicles emission in this city. This could help to find efficient solutions to improve the situation. Hence, a low-cost methodology to estimate the vehicular emissions is developed. In this... 

Speech enhancement in noisy environments improves the quality and intelligibility of speech and reduces communication fatigue. High performance speech enhancement models are based on Bayesian estimation models, requiring estimations of the parameters of the functions that describe the likelihood and the prior distributions of the signal and noise processes. Two Bayesian speech enhancement models which are used in this thesis are Bayesian-Kalman filter and Bayesian MAP estimation.In real time applications including VoIP, in addition to additive noise, packet loss or packet delays might also occur. In real time communications the receiver terminal replaces silence for the duration of lost... 

The purpose of this reaserch is to create a context in production of Bone Morphogenetic Protein-2 with more effective properties in Bone healing in Iran. Because of demand Of this protein in medical field it could cause an evalution in bone healing. The first section of this reaserch was the Construction of new recombinant plasmid carrying bone morphogenetic protein gene that was title of this thesis. First total RNA was extracted from ostosarcoma cancer cell line MG-63 followed by cDNA synthesis.For amplifying of the mature region of protein a pair of primer with tow restriction site was designed. After Success in PCR and obtaining PCR product with size of 343bp it transferd to vector... 

Recently, the severe plastic deformation (SPD) is known as one of the most used methods in decreasing the grain size and increasing the strength of metals. In this study, aluminum 1100was subjected toconstrained groove pressing (CGP) at room temperature. The CGPed samples in nanoscale structure, with different CGPed passes were direct rolled and cross-rolled in different rolling strains. Finally, all of the samples were annealed at temperatures of 100, 200 and 300 ° C for 30 min. It was observed that with increasing number of CGP passes and rolling strain the structure became more laminate and finer. With increasing rolling strain, the cross-rolling had greater effect on the microstructure... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

Among probable hazards in chemical industries: vapor cloud explosion (VCE) is one of the worst and most destructive ones. More than half of the major process inci¬dents, according to the statistics, are VCEs. VCE causes the most serious consequences; therefore, it attracts many attentions to itself. Accordingly, plenty of researches have been done for the purpose of protection against VCE effects. All efforts in this field can be categorized in two different main activities; firstly, prescribing safety distances between groups of hazardous equipment and vulnerable areas, secondly, using facilities which reinforce vulnerable areas against explosion blasts. Regardless to which category is... 

The main task of the spine from the mechanical point of view, withstand external loads and allow the upper body movements. Hence, as the chief cause of back pain are mechanical parameters. Inability to directly measure the forces acting on the spine as in vivo, further brings us to the use of computer models in various branches of orthopedic biomechanics leads.
The purpose of this project in the first place) to make a detailed finite element model of the L4-L5 spinal motion but, in the second place) loads imposed on it except move in a certain physical activities, taking into account the forces acting muscles (calculated by a musculoskeletal model is available) under which they operate,...