Sharif Digital Repository

The effectiveness of the application of CFD to vapour cloud explosion (VCE) modelling depends on the accuracy with which geometrical details of the obstacles likely to be encountered by the vapour cloud are represented and the correctness with which turbulence is predicted. This is because the severity of a VCE strongly depends on the types of obstacles encountered by the cloud undergoing combustion; the turbulence generated by the obstacles influences flame speed and feeds the process of explosion through enhanced mixing of fuel and oxidant. In this paper a CFD-based method is proposed on the basis of the author's finding that among the various models available for assessing turbulence, the... 

Graphene oxide membranes were prepared by vacuum and pressurized ultrafiltration methods on the 12% modified Polyacrylonitrile (12mPAN) substrate to specify challenges, salient features, future directions, and potential of GO membrane for separation fields using characterization techniques and gas separation test (studied gases are CO2, He and N2), which is an efficient tool for better understanding of GO membrane behavior. GO membrane structure was examined over a wide range of parameters, such as pore size range of substrate and its surface properties, pH of GO dispersion, GO content, synthesis pressure, operating pressure and temperature. The results show that the GO content does not hold... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

This study forwards a novel and simple approach for encapsulation of Phosphotungstic acid (PTA) into MIL-101(Cr) cavities to develop PTA-MIL-101(Cr) with a high surface area. In this method, the resulting surface area of PTA-MIL-101(Cr) (3563 m2/g) is 1.72 times that of MIL-101(Cr) due to the existence of more accessible pores which are formed by leaching of PTAs incorporated inside MIL-101(Cr) pores during the intense washing. Catalysts are investigated in CO oxidation under atmospheric pressure and feed composition of 1%CO, 20%O2, and 79%He. 3%Pd/PTA-MIL-101(Cr) shows 100%CO conversion at T = 145 °C and outperforms PTA, PTA-MIL-101(Cr), Pd/PTA, 1–3%Pd/MIL-101(Cr), Pd-PTA/MIL-101(Cr), and... 

In this study, titanium substrates which previously oxidized through Micro arc oxidation method, was coated by Hydroxyapatite (HAp) coating once more by means of the same method. Morphology, topography and chemical properties as well as phase composition and thickness of layers were studied to reveal the effect of the electrolyte concentration on coating features. According to results, the obtained coatings are consisted of HAp and titania as the major phases along with minor amounts of calcium titanate and α-tri calcium phosphate. Ca and P are present on surface of obtained layers as well as predictable Ti and O based on the XPS results. Thickness profile of coatings figured out that by... 

A three–dimensional metal organic framework (3D–MOF) and a two–dimensional polyoxometalate (2D–POM), both incorporating nanostructured molybdenum (VI) oxide, were synthesized and implemented for headspace needle trap extraction of traces of chlorobenzenes (CBs). The 3D–MOF of type {(Mo2O6)(4,4′–bpy)}n and the 2D–POM of type [4,4′–bpy][Mo7O22] were synthesized by a solvothermal process and characterized by FT–IR, powder X–ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetry, energy dispersive X–ray, elemental mapping and Brunner–Emmet–Teller adsorption analyses. The 3D–MOF proved to be superior. Following thermal desorption, the CBs... 

Numerous advantages of application of tailor welded blanks (TWBs) in automobile industry, namely reduction of weight, fuel consumption and air pollution, have made the manufacturers eager to investigate in this field. On the other hand, while experiments generally provide valuable information in regard with mechanical behaviors, but utilization of simulation methods has extended vastly due to time and cost saving issues. One challenging issue in numerically analyzing the forming behavior of transversely welded TWBs, welded by laser welding methods, has been the presence of weld zone. While some researchers believe that during simulation, the weld zone can be neglected due to its minority and... 

Non-linear bending analysis of tapered functionally graded (FG) beam subjected to thermal and mechanical load with general boundary condition is studied. The governing equations are derived and a discussion is made about the possibility of obtaining analytical solution. In the case of no axial force along the beam, a closed form solution is presented for the problem. For the general case with axial force, the Galerkin technique is employed to overcome the shortcoming of the analytical solution. Moreover, the Generalized Differential Quadrature (GDQ) method is also implemented to discretize and solve the governing equations in the general form and validate the results obtained from two other... 

In this study, free vibration analysis of moderately thick symmetrically laminated general trapezoidal plates with various combinations of boundary conditions is investigated. The governing partial differential equations and boundary conditions for trapezoidal plate are obtained using first order shear deformation theory (FSDT) together with proper transformation from Cartesian system into trapezoidal coordinates. Generalized differential quadrature (GDQ) method is then employed to obtain solutions for the governing equations. Results of the GDQ method are compared and validated with available results in the literature which show accuracy and fast rate of convergence of the method. Effect of... 

The quality of service in Wireless Multimedia Sensor Networks (WMSN) is related to congestion in network. Recently different studies have been done on developing efficient protocols in the transport layer for controlling packet loss in WMSN. However, all of these protocols are independent of the characteristics of multimedia content. In this paper, a novel transport layer protocol, called Energy Efficient Congestion Avoidance (EECA), is proposed to minimize the packet loss ratio in WMSN by predicting congestion in network, and adjusting the source nodes output rate before congestion happening. EECA adjusts the output video quality in source nodes to adjust the source nodes video quality. The... 

Stress analysis of thick walled functionally graded (FG) cylindrical pressure vessels subjected to uniform axisymmetric thermo-mechanical loads is presented using Bernstein polynomials. All thermal and mechanical properties except Poisson's ratio of the FG vessels vary through the thickness with arbitrary functions of the radial coordinate. Based on the thermo-elasticity theory, the first law of thermodynamics and axisymmetric assumption, the governing equations of the semi-coupled thermo-elasticity problem reduce to a set of second order boundary value problem. Galerkin method together with Bernstein polynomials is used to obtain solution for the governing equations. The presented method is... 

Ordinary frequently occur as mathematical models in many fields of science, engineering, differential equations (ODEs) and economy. It is rarely that ODEs have closed form analytical solutions, so it is common to seek approximate solutions by means of numerical methods. One of the most useful methods for the solution of ODEs is multi-step methods. Although the existing multi-step methods such as Adams—Moulton are accurate and useful, they also have their own limitations such as instability at large step sizes or weak performance in the case of stiff ODEs. Thus, multi-step methods that show better behavior compared to the existing methods are preferred, because they decrease the computational... 

It is always crucial to estimate process capability index (PCI) when the quality characteristic does not follow normal distribution, however skewed distributions come about in many processes. The classical method to estimate process capability is not applicable for non-normal processes. In the existing methods for non-normal processes, probability density function (pdf) of the process or an estimate of it is required. Estimating pdf of the process is a hard work and resulted PCI by estimated pdf may be far from real value of it. In this paper an artificial neural network is proposed to estimate PCI for right skewed distributions without appeal to pdf of the process. The proposed neural... 

Micro arc oxidation was employed to grow TiO2/hydroxyapatite composite layer on titanium substrate. The correlation between electrolyte concentration, diameter and density of the pores in fabricated layers was investigated. Therefore, the effect of electrolyte concentration on composition and morphology of grown layers was studied using SEM, EDX, XRD and XPS techniques. Samples were coated in electrolytes containing 5, 10 and 15 g/l calcium acetate and 1, 3 and 5 g/l β-glycerophosphate, at optimized voltage for 3 min. Pore size variations obey a similar pattern by the addition of both calcium acetate and β-glycerophosphatein various concentrations based on SEM observations. However,...