Sharif Digital Repository

The disposal of polychlorinated biphenyls (PCBs) as persistent organic pollutants from the environment has been normally performed by isolation from soil or water because of their biological activity and toxic potential. In the present investigation, catalytic hydrodehalogenation was used to detoxify PCBs-contaminated transformer oil. All reactions were directed on an oil containing 11.09 wt% of PCBs utilizing palladium supported on multi-walled carbon nanotubes (Pd/MWCNTs). The amount of hexa-chlorine homologues reduced considerably from 5.07% to less than 800 ppm utilizing HDC at the atmosphere of argon. Moreover, the amounts of long half-lives and bioaccumulative congener of PCB 153... 

Effective prevention and treatment management of spinal disorders can only be based on accurate estimation of muscle forces and spinal loads during various activities such as lifting. The infeasibility of experimental methods to measure muscle and spinal loads has prompted the use of biomechanical modeling techniques. A major shortcoming in many previous and current models is the consideration of equilibrium conditions only at a single cross section, rather than along the entire length of the spine, when attempting to compute muscle forces and spinal loads. The assumption of extensor global muscles with straight rather than curved paths and of the spinal segments as joints with no... 

A simple and systematic approach is developed for modeling and adaptive control of an unknown (or uncertain) chaotic system of the form x(n) = f(X) + g(X)u, using only input-output data obtained from the underlying dynamic system. Two different fuzzy identification methods, i.e. least-squares and gradient descent, are used for identifying the unknown functions f (X) and g (X). Based on the fuzzy modeling, an adaptive controller is devised, which works through sliding mode method. The presented procedure is illustrated by using the chaotic system-modified Duffing's equation as an example, on which simulation results demonstrate the effectiveness of the proposed adaptive algorithm. Copyright ©... 

The disposal of polychlorinated biphenyls (PCBs) as persistent organic pollutants from the environment has been normally performed by isolation from soil or water because of their biological activity and toxic potential. In the present investigation, catalytic hydrodehalogenation was used to detoxify PCBs-contaminated transformer oil. All reactions were directed on an oil containing 11.09 wt% of PCBs utilizing palladium supported on multi-walled carbon nanotubes (Pd/MWCNTs). The amount of hexa-chlorine homologues reduced considerably from 5.07% to less than 800 ppm utilizing HDC at the atmosphere of argon. Moreover, the amounts of long half-lives and bioaccumulative congener of PCB 153... 

Surface and submerged fermentation methods were used to produce citric acid by Aspergillus niger using chemically defined media or cane molasses. Fermentation process parameters were optimized in pilot scale tower and tray fermenters. Fermentation was running from 10 - 20 days with pH controlled at 3 - 6.5. Citric acid concentrations varied from 60 - 100 g/L depending on the strain used, the substrate, the fermentation system and the general conditions under which fermentation took place (initial sugar concentration, aeration rate, inoculum size, pH and temperature). Some essential criteria such as lower process sensitivity to short interruptions or breakdowns in aeration, expenses for... 

In order to analyze the flow behavior and workability of Ni–42Cu in cast and wrought conditions, hot deformation tests were performed at temperatures and strain rates within the ranges of 900–1150 °C and 0.001–1 s−1, respectively. Tensile tests showed a “hot ductility trough” at 950 °C for both alloys. The drop in hot ductility was more considerable in the cast alloy because of the sluggish dynamic recrystallization. The hot ductility drop and grain boundary cracking, particularly in the cast alloy, were attributed to the segregation of detrimental atoms to the boundaries. It was shown that the hot ductility of the wrought alloy could be improved with increasing strain rate. It was... 

Epidemiological studies have identified obesity as a possible risk factor for low back disorders. Biomechanical models can help test such hypothesis and shed light on the mechanism involved. A novel subject-specific musculoskeletal-modelling approach is introduced to estimate spinal loads during static activities in five healthy obese (BMI > 30 kg/m2) and five normal-weight (20 < BMI < 25 kg/m2) individuals. Subjects underwent T1 through S1 MR imaging thereby measuring cross-sectional-area (CSA) and moment arms of trunk muscles together with mass and center of mass (CoM) of T1-L5 segments. MR-based subject-specific models estimated spinal loads using a kinematics/optimization-driven... 

Epidemiological studies have identified obesity asa possible risk factor for low back disorders. Biomechanical models can help test such hypothesis and shed light on the mechanism involved. A novel subject-specific musculoskeletal-modelling approach is introduced to estimate spinal loads during static activities in five healthy obese (BMI>30kg/m2) and five normal-weight (20