Sharif Digital Repository

In this research, self-optimizing method has been used to design a plant-wide control structure for processes containing purge and recycle streams. The method is based on the concept of self-optimizing variables to maximize the process profitability in the presence of possible disturbances. The purpose of this thesis is to perform this procedure on ammonia and methanol processes containing purge and recycle streams.Using the results obtained for the ammonia process and considering the constraints and operating conditions of the problem, the active constraints of this process were detected which were cooling water flow rates to exchangers. According to local analysis method, self-optimizing... 

Renewable energy deployment through distributed energy resources is among the central goals of future power systems. Microgrids have proven to be an economically viable soloution for distributed energy resources integration into power system and benefit the customers with uninterrupted power supply. In this context provisional microgrids have been introduced with the main goal of rapid renewable energy sources deployment. Since a considerable portion of renewable enegy resources as well as residential loads are DC and this portion is expected to grow even further, hybrid AC/DC design of provisional microgrids can improve both efficiency and economic benefit by optimal arrangement of AC/DC... 

Energy storage is a pivotal technology to dealing with increasing demand for reliability and challenges of renewable energy integration. This thesis provides a benders decomposition framework for expansion studies of energy storage systems (ESSs) in high wind penetrated power system and uncertainties of wind farms expansion and wind speed. This work proposes probabilistic and robust approaches to determine the optimal location and size of storage devices to reduse wind curtailment. The proposed methodologies are implemented on the modified IEEE 73-bus test system and their anticipated applicability are compared to each other and well verified  

Due to the increasing influence of distribution generation , their effect in planning can't be ignord , especially solar panels ,which are incresing rapidly. The main purpose of this thesis is to an active distribution network that annually load bus and the amount of photovoltaic production in it increases and plan dynamically. In the planning that is done , uncertanty in the amount comsumption load and uncertanty in the pattern of sunlight and also annual innterest rates in the classical system we have planned by optimizing the network expansion costs , in addition to supplying the load bus, we can keep the voltage drop bus and line filling within the allowable . To do this , we considered... 

One of the model based control strategies that has been proposed in recent years for the control of process systems is the one based on the economic models, in which objective functions with an economic basis are used along with the equations and constraints to perform control calculations. In this work, the control of a multiproduct continuous stirred reactors is discussed, in which, it is possible to produce different products based on changes in the market demand, the price of the products or the primary raw materials according to a specific schedule. One of the recently used methods is the economic predictive control method based on the Lyapunov function. In this method a quadratic... 

In a deregulated environment of power distribution industry, a comprehensive economic evaluation for the implementation of distribution automation systems is inevitable. It plays a key role in enabling distribution companies to achieve their business goals. In this thesis, a dynamic economic evaluation is presented to provide a comprehensive perception of automation intensity level and investment plan, for maximizing the utility profit and obtaining the desired payback period. Using the presented methodology in this thesis and system dynamics approach, it is efficiently possible to deal with variation of the economic parameters such as the interest rate, inflation rate, energy supply cost,... 

The competition between producers and the contracts issues between the producers and consumers of electrical energy in restructured power systems might cause on unwanted increase in power interchange beyond transmission lines capacity. If the power interchange is not well-managed, it would often cause overloads in specific path. This phenomenon is termed as lines congestion. The major goal of congestion management is to create a set of rules that ensure sufficient control over producers and consumers to maintain an acceptable level of power system security and reliability in the time of limitation of transmission network with maximizing economic market efficiency. As FACTS devices provide... 

Nowadays, with the development of the generation and storage technologies of electrical energy, increasing attention to environmental issues, and interest in improving the reliability of electrical energy distribution networks, the motivation to develop the distribution networks from pssive to active mode. Although, the utilizing of electrical energy storage systems (EESs) made technical and economic analysis of power system more complicated, but some of these challenges have faciliated by microgrids. Indeed, microgrids, as low voltage and medium voltage networks, can provide a set of significant benefits at the level of distribution networks by improving energy efficiency, power quality,... 

Electricity is one of the most important kinds of energy and also one of essential needs of humans for maintaining their life. Due to growth of costumer’s load and In order for delivering high reliable power to the consumers, the structure of the power grid must be expanded and/or demand side management policies like demand response programs must be taken into consideration. One of the most important and less-focused aspects of power grid expansion planning is, distribution system expansion planning. Distribution system expansion planning (DSEP) is an important task of electric distribution companies and operators in order to appropriately supply their customers load with the minimum cost... 

The fast growth of technologies, most of which depend on natural sources of energy, has resulted in colossal fossil fuel consumption. In this regard, many solutions have been suggested to alleviate the side effects such as air pollution and global warming. Among these solutions, mobile storages like electric vehicles (EVs) and renewable generations have grown significantly due to being more applicable. The uncoordinated operation and uncertain nature of these distributed energy resources (DERs) can bring forward new challenges and issues to the power system operators. Thus, in many cases, it is more efficient to co-operate them in a hybrid system. In this thesis, we address a virtual power plant... 

Distribution companies typically use ADMD and coincidence factors to calculate aggregated loads. However, these factors have a significant impact on the selection of the optimal capacity of distribution network equipment; But so far, comprehensive studies at the level of single customers have not been implemented on the calculation of these factors. In this work, a comprehensive study has been conducted on residential customers in Tehran and the consumption data of 2121 residential customers, which were recorded during the summer of 2020, are used. The data were collected in two separate sets to investigate the effect of two factors: the type of cooling load and the welfare level of... 

One of the shortcomings of differential logic in power transformers is its inability to detect small percentage faults at the end of the winding. The occurrence of a phase-to-ground short circuit in the last few percent of the winding near the neutral causes a very large fault current to pass through the neutral and the faulted coils, while the changes in the current observed at the transformer terminal will be very small. To improve the performance of the power transformer protection system, a restricted earth fault (REF) protection is normally used in parallel with the differential protection. To implement REF protection, several solutions have been proposed in scientific and industrial... 

In this thesis titled "Enhancing Energy Efficiency in Ideal Binary Distillation tower with a Dynamic Process Intensification," operational methods in distillation units are explored and improved. Given the high cost of energy, limited energy resources, and environmental considerations, increasing energy efficiency in process industries has become significantly important. In this context, this research attempts to enhance the performance of the distillation unit by utilizing dynamic process intensification with two operational points corresponding to the production of products with purities both higher and lower than the desired product purity, and switching between these two points. The... 

This thesis examines the impact of daylight saving time policy on electricity consumption in Iran. After World War I, many countries gradually implemented annual time change laws to extend daylight availability. This involved moving a specific amount of time (usually one hour) forward in early spring and back in early autumn. Historically, the majority of the electricity load on power grids was due to lighting, so this decision made sense. However, with technological advances and diversification of electricity usage, this decision is now being questioned, particularly in light of air conditioning loads, which make up a large part of electricity usage in Iran. These loads have the potential... 

In order to control accesses in semantic environments, a semantic-based access control and policy specification language should be choosen. Upon to them, some security mechanisms should be designed and implemented. Several access control models and policy specification languages have been arisen, but seldom have focused on designing mechanisms to satisfy their models in any environment. In this thesis, we focus on implementation aspects of access control in semantic environments. We chose semantic web as our studying environment and an extension of the SBAC model named MA(DL)2 as our access control model. To control accesses in the selected environment, we divide semantic web into some... 

In order to reduce damage caused by power outages on rare events that lead to long-term disconnection of microgrid from utility grid, isolated mode performance of microgrids including wind and hudro turbines with energy storage systems is considered in this study. Using wind energy as a renewable resource is considered as an appropriate choice for power production in microgrids. However, the uncertainty in wind turbines power generation is something challenging. The existence of water resources near the wind farms causes a special opportunity for operation of these resources along with wind turbines. This thesis aimed at balancing energy supply and demand in island mode of microgrid,... 

The analysis of electrical energy consumption parameters such as rate and amount of consumption, plays an important role in the planning of power systems. Because the dynamic analysis and evaluation of these parameters provides a detailed forecast of consumption and power system load. these forecasts is given to planners and engineers as the input of power system planning .Given that the electrical energy consumption system can be thought as a dynamic system, System Dynamics (SD) method would be very appropriate for modeling and analyzing its behavior. In this thesis, based on the SD and by means of dynamic loops, a comprehensive dynamic system for electrical energy is introduced. So the... 

Cogeneration or combined heat and power (CHP) which simultaneously produces electricity and heat energy from sequential use of single fuel source, has been introduced increasingly for industrial, commercial and residential applications due to its high energy efficiency. While the capital costs of CHP systems are comparatively higher than the conventional systems, their proper selection and optimal sizing and also optimal operation could result in shorter capital recovery period and lower cost of energy supply. Essentially the technical, economic and environmental performances of CHP system are closely dependent on its design and operation strategy. This project presents an optimization... 

In Endurance Time method structures are subjected a set of predesigned intensifying excitations. These excitations are produced in a way that their response spectrum, while complying with a specified spectrum, intensifies with time. So they can be used approximately to simulate the average effects of several ground motions scaled to different intensities. In this study applicability of Endurance Time method for evaluating collapse potential of buildings is investigated. A set of steel moment frames is used for collapse assessment. The process of using Endurance Time method in collapse evaluation is explained with consideration of uncertainty effects. collapse fragility curves and collapse... 

One of the topics that has been given great consideration after restructuring and smart grid emergence, is loss management. This subject is specifically important in distribution systems, which have been reported to have 70% of the total loss in power systems. In this thesis, distribution loss is studied and its affecting factors are analyzed. Then loss optimization and loss cost allocation to distribution consumers are studeid. In order to acheive these two goals, it is neccessary for the distribution system to have the capabilities of a smart grid. The subjectof distribution reconfiguration is duiscussed as one of the loss reduction methods. Traditional reconfiguration problem trend...