Loading...
Search for:
darvish--h
0.107 seconds
Total 8874 records
The dependency of relative permeability on dominated flow regimes under gas gravity assisted flow
, Article Energy Sources, Part A: Recovery, Utilization and Environmental Effects ; Volume 33, Issue 2 , Oct , 2011 , Pages 101-113 ; 15567036 (ISSN) ; Kharrat, R ; Pooladi Darvish, M ; Ghotbi, C ; Sharif University of Technology
2011
Abstract
Gas-oil relative permeability is essential for performance predictions of reservoirs with solutions for gas drive, gas cap expansion, or gas injection. The nature of flow in reservoir is determined by the interplay of relative permeability and viscous, gravity, and capillary forces. Displacement experiments of the gas-oil system are performed on long core scale models by varying the petrophysical properties and flow conditions. Experiments are conducted in situations where capillary, gravity, and viscous forces are comparable. The effect of destabilized front velocity on relative permeability and residual saturation is investigated. The results indicate that the relative permeability varies...
Identification of fluid dynamics in forced gravity drainage using dimensionless groups
, Article Transport in Porous Media ; Volume 83, Issue 3 , July , 2010 , Pages 725-740 ; 01693913 (ISSN) ; Kharrat, R ; Pooladi Darvish, M ; Ghotbi, C ; Sharif University of Technology
2010
Abstract
A number of forced gravity drainage experiments have been conducted using a wide range of the physical and operational parameters, wherein the type, length, and permeability of the porous medium as well as oil viscosity and injection rate were varied. Results indicate that an increase in the Bond number has a positive effect on oil recovery whereas the capillary number has an opposite effect. These trends were observed over a two-order of magnitude change in the value of the dimensionless groups. Furthermore, it was found that use of each number alone is insufficient to obtain a satisfactory correlation with recovery. A combined dimensionless group is proposed, which combines the effect of...
Performance improvement of junctionless field effect transistors using p-GaAs/AlGaAs heterostructure
, Article Superlattices and Microstructures ; Volume 110 , 2017 , Pages 305-312 ; 07496036 (ISSN) ; Yazdanpanah Goharrizi, A ; Faez, R ; Darvish, G ; Sharif University of Technology
2017
Abstract
The performance analysis of junctionless (JL) gate-all-around (GAA) metal oxide semiconductor field effect transistors (MOSFETs) is investigated using the Non-Equilibrium Green's Function (NEGF) formalism. The main problem of JL transistors is found to be the OFF-state current. In the present work, the OFF-state current of such devices is decreased by choosing channel materials with a large band gap and heavy effective mass. Our simulation results show that the OFF-state current of JL transistors with p-type GaAs is less than that of n-type GaAs. Plus, the heterostructure (HES) channel is proposed in this study for improving the device characteristics of JL-FETs as compared to homostructure...
Divine Action in Nature; Special Study of the Relationship between God and Man, Regarding the Foundations of Cognitive Science
,
Ph.D. Dissertation
Sharif University of Technology
;
Hosseini, Hassan
(Supervisor)
;
Azadegan, Ebrahim
(Supervisor)
Abstract
The problem of the divine actin in nature in its traditional form has been raised as the relation between the entities which have origination and eternal entities. However, the new form of this problem is how the divine action would be compatible with the basic assumptions of naturalism and physicalism, especially causal closure. In the present dissertation, two approaches in this issue are examined. First one is a metaphysical perspective and tries to explain the divine action through the laws of nature. The second approach is a science-based perspective and tries to solve the problem through physical indeterminations, especially in quantum mechanics. I advocate the first approach, with...
Optimization of Operating Conditions of Immobilized Penicillin G Acylase (PGA) Enzyme for Amoxicillin Synthesis
, M.Sc. Thesis Sharif University of Technology ; Roosta Azad, Reza (Supervisor) ; Aalemzadeh, Iran (Supervisor)
Abstract
Penicillin G Acylase is the key enzyme in producing semi-synthetic antibiotics such as Ampicillin and Amoxicillin. In this study, we used E.coli ATCC 11105 in order to produce it. This enzyme was an intracellular one which was produced under suitable conditions. Crude enzyme was released after cell disruption by ultrasonic waves (sonication method) and was partially purified by ammonium sulphate precipitation. Immobilization is investigated at different pHs around the iso-electric pH of Penicillin G Asylase enzyme. Therefore, optimum pH and optimum concentration of ammonium sulphate cuts were determined. Also immobilization process of this enzyme was studied on chitosan polymer, activated by...
Two nanostructured polymers: Polyaniline nanofibers and new linear-dendritic matrix of poly(citric acid)-block-poly(ethylene glycol) copolymers for environmental monitoring in novel biosensors
, Article International Journal of Polymeric Materials and Polymeric Biomaterials ; Volume 62, Issue 7 , Jul , 2013 , Pages 377-383 ; 00914037 (ISSN) ; Vossoughi, M ; Alemzadeh, I ; Naeini, A. T ; Darvish, M ; Sharif University of Technology
2013
Abstract
In this work two phenol biosensors, one based on polyaniline nanofibers (PNFs) and the other based on the newly created and introduced linear-dendritic matrix of poly(citric acid)-block-poly(ethylene glycol) copolymers (PCA-PEG-PCA), were chemically modified with horseradish peroxidase (HRP) enzyme. These phenol biosensors showed an oxidation peak at 0.55 V. The amperometric response for biosensors based on PNFs showed a linear response range from 2.5 × 10-6 to 2.5 × 10-5 mol/L, with a detection limit of 2.5 M phenol. Also, the amperometric response for a biosensor based on PCA-PEG-PCA showed a linear response range from 2.5 × 10-6 to 4 × 10-5 mol/L, with a detection limit of 1.5 M phenol
First principles study of the I-V characteristics of the alkane-thiols nano-molecular wires
, Article Current Applied Physics ; Volume 9, Issue 2 , 2009 , Pages 367-373 ; 15671739 (ISSN) ; Gholami, M. R ; Darvish Ganji, M ; Taghavi, M. M ; Sharif University of Technology
2009
Abstract
We report a density functional non-equilibrium Green's function study of electrical transport in a single molecular conductor consisting of an ethane-dithiolate (C2H4S2) molecular wire with two sulfur end groups bonded to the Au(1 1 1) electrodes. We show that the current was increased by increasing the external voltage biases. The projected density of states (PDOS) and transmission coefficients T(E) under various external voltage biases are analyzed, and it suggests that the variation of the coupling between the molecule and the electrodes with external bias leads to the increase of the current. Furthermore, the investigation of the transport properties of the pentane-dithiolate (C5H10S2)...
Mechanistic Studies of Improved Oil Recovery under Forced Gravity Drainage GAGD Process
, Ph.D. Dissertation Sharif University of Technology ; Kharrat, Riyaz (Supervisor) ; Ghotbi, Cyrus (Supervisor) ; Pooladi Darvish, Mehran (Co-Advisor)
Abstract
Gas-oil displacement, when stabilized by gravity forces leads to high displacement efficiency, as manifested in high recovery factor associated with gas-cap drive and gravity drainage. The main objective of this research is improved understanding of drainage behavior and changes in flow properties when the importance of viscous, gravity and capillary forces varies. The influence of interplaying between controlling forces on relative permeabilities is also studied. Another objective of this work is to study effect of wettability on recovery under forced gravity drainage. To study drainage behavior under various dominant driving/resistive forces, a number of forced gravity drainage experiments...
Nonlinear interstory drift contours for idealized forward directivity pulses using "modified fish-bone" models
, Article Advances in Structural Engineering ; Volume 18, Issue 5 , May , 2015 , Pages 603-627 ; 13694332 (ISSN) ; Khosravi, H ; Jamnani, H. H ; Sharif University of Technology
Multi-Science Publishing Co. Ltd
2015
Abstract
Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period...
Analysis of singularities of a 3DOF parallel manipulator based on a novel geometrical method
, Article 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006, Torino, 4 July 2006 through 7 July 2006 ; Volume 2006 , 2006 ; 0791837793 (ISBN); 9780791837795 (ISBN) ; Sadeghian, H ; Roozbehani, H ; Zohoor, H ; Sharif University of Technology
2006
Abstract
In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,...
Melting enthalpy and entropy of freestanding metallic nanoparticles based on cohesive energy and average coordination number
, Article Journal of Physical Chemistry C ; Volume 115, Issue 35 , August , 2011 , Pages 17310-17313 ; 19327447 (ISSN) ; Delavari H., H ; Madaah Hosseini, H. R ; Sharif University of Technology
2011
Abstract
An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of...
On the temperature and residual stress field during grinding
, Article WCE 2010 - World Congress on Engineering 2010, 30 June 2010 through 2 July 2010 ; Volume 2 , 2010 , Pages 1196-1200 ; 9789881821072 (ISBN) ; Farrahi, G. H ; Ghadbeigi, H ; Sharif University of Technology
2010
Abstract
Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress...
A new lattic LP-based post filter for adaptive noise cancellers in mobile and vehicular applications
, Article Proceedings of the 8th IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2008, 16 December 2008 through 19 December 2008, Sarajevo ; 2008 , Pages 407-412 ; 9781424435555 (ISBN) ; Sameti, H ; Veisi, H ; Abutalebi, H. R ; Sharif University of Technology
2008
Abstract
Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no...
Finite element analysis of shot-peening effect on fretting fatigue parameters
, Article Tribology International ; Volume 44, Issue 11 , 2011 , Pages 1583-1588 ; 0301679X (ISSN) ; Alvandi Tabrizi, Y ; Farrahi, G. H ; Majzoobi, G. H ; Ghadbeigi, H ; Sharif University of Technology
2011
Abstract
Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters
Mechanically activated synthesis of single crystalline MgO nanostructures
, Article Journal of Alloys and Compounds ; Volume 506, Issue 2 , September , 2010 , Pages 715-720 ; 09258388 (ISSN) ; Yoozbashizadeh, H ; Askari, M ; Kobatake, H ; Fukuyama, H ; Sharif University of Technology
2010
Abstract
One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50...
Boundary control design for vibration suppression and attitude control of flexible satellites with multi-section appendages
, Article Acta Astronautica ; Volume 173 , 2020 , Pages 22-30 ; Salarieh, H ; Nejat Pishkenari, H ; Jalili, H ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of...
Characterization and calcination behavior of a low-grade manganese ore
, Article Materials Today Communications ; Volume 25 , 2020 ; Becker, H ; Eftekhari, H ; Yoozbashizadeh, H ; Safarian, J ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion...
Minimizing the error of time difference of arrival method in mobile networks
, Article 2005 International Conference on Wirelessand Optical Communications Networks, Dubai, 6 March 2005 through 8 March 2005 ; 2005 , Pages 328-332 ; 0780390199 (ISBN); 9780780390195 (ISBN) ; Aghababa, H ; Radfar, M. H ; Khalaj, B. H ; Sharif University of Technology
2005
Abstract
Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for...
A fast and novel method of pattern synthesis for non-uniform phased array antennas
, Article Proceedings International Radar Symposium, 24 June 2015 through 26 June 2015 ; Volume 2015-August , 2015 , Pages 924-929 ; 21555753 (ISSN) ; 9783954048533 (ISBN); 9783954048533 (ISBN); 9783954048533 (ISBN) ; Sebt, M. A ; Nayebi, M. M ; Behroozi, H ; Rohling, H ; Rohling, H ; Rohling, H ; Sharif University of Technology
IEEE Computer Society
2015
Abstract
Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of...
Size-dependent interaction of an edge dislocation with an elliptical nano-inhomogeneity incorporating interface effects
, Article International Journal of Solids and Structures ; Volume 49, Issue 5 , March , 2012 , Pages 759-770 ; 00207683 (ISSN) ; Ahmadzadeh Bakhshayesh, H ; Gutkin, M. Y
2012
Abstract
The elastic behavior of an edge dislocation, which is positioned outside of a nanoscale elliptical inhomogeneity, is studied within the interface elasticity approach incorporating the elastic moduli and surface tension of the interface. The complex potential function method is used. The dislocation stress field and the image force acting on the dislocation are found and analyzed in detail. The difference between the solutions obtained within the classical-elasticity and interface-elasticity approaches is discussed. It is shown that for the stress field, this difference can be significant in those points of the inhomogeneity-matrix interface, where the radius of curvature is smaller and which...