Sharif Digital Repository

The corrosion process of two iron dagger handles decorated with bronze strips found from the Ziviyeh area, which is one of the important Iron Age sites in the northwest of Iran, is thoroughly investigated. X-ray radiography was used to obtain the damages and corrosion zones of the artifact. Optical and scanning electron microscopies were used to study the microstructure of cross sections and to achieve structural details about the metal matrix and corrosion layers. The X-ray diffraction method was used to study the chemical characterization of corrosion products. The results of studies have shown that severe stress on bronze strips is caused by the formation of goethite and lepidocrocite... 

Yttrium Iron Garnet (YIG) powders were synthesized by a sol-gel auto-combustion method using cationic and anionic surfactants with different values and different calcination times and temperatures. The final products were characterized by DTA/TG, XRD, TEM and VSM techniques. The results showed a decrease in calcination temperature and crystallite size in the presence of a cationic surfactant, while no significant effect was observed using an anionic surfactant. Magnetic properties of YIG powders were improved as an optimum value of cationic surfactant was used  

Different ways have been presented to prevent elastic buckling of steel shear walls. One of these solutions is corrugated shear wall. In this type of wall, shear buckling strength increases without increasing the thickness of the panel. Numerical modeling results indicate that, always, shear buckling strength of corrugated panels is more than the flat panels and with the right choice of the geometric parameters of corrugated panels; without increasing the thickness of the panel, we can improve buckling strength significantly. In the trapezoidal corrugated panels, reducing the width of the subpanels do not always increase buckling strength of the panel, but it changes the panel buckling shape... 

The main purpose of this paper is to present a novel procedure for accelerating a multi-objective optimization method of designing a 5G antenna. The optimization method was chosen after comparing four learning optimization algorithms. The Kriging algorithm was found to be superior to the Artificial Neural Network (ANN), Support Vector Machine (SVM), and Rational algorithms. Our methodology is creatively correlated to exploit some cost functions of height, the Dielectric constant of the substrate, and meta-material design variables, with a view to reducing the return loss and increasing the gain in learning from the Kriging model builder techniques. This was fully achieved in the present... 

In this work we present the effective field theory of primordial statistical anisotropies generated during anisotropic inflation involving a background U(1) gauge field. Besides the usual Goldstone boson associated with the breaking of time diffeomorphism we have two additional Goldstone bosons associated with the breaking of spatial diffeomorphisms. We further identify these two new Goldstone bosons with the expected two transverse degrees of the U(1) gauge field fluctuations. Upon defining the appropriate unitary gauge, we present the most general quadratic action which respects the remnant symmetry in the unitary gauge. The interactions between various Goldstone bosons leads to... 

Text processing, as one of the main issues in the field of artificial intelligence, has received a lot of attention in recent decades. Numerous methods and algorithms are proposed to address the task of semantic textual similarity which is one of the sub-branches of text processing. Due to the special features of the Persian language and its non-standard writing system, finding semantic similarity is an even more challenging task in Persian. On the other hand, producing a proper corpus that can be used for training a model for finding semantic similarities, is of great importance. In this study, the main purpose is to propose a method for measuring the semantic similarity between short... 

The main goals in zinc electrowinning process are decreasing of power consumption and increasing of current efficiency. The purpose of this research was to investigate effect of different alloy compositions used in production of lead-based anodes on the zinc electrowinning process. The anode compositions prepared and examined in this study were binary alloys Pb - (0.5 and 2 %) Ag and quaternary alloys Pb - 0.5 % Ag - 1 % Ca - 2 % Sn, Pb - 0.5 % Ag - 1 % Ca - 1 % Sn - 1 % Sb and Pb - 0.5 % Ag - 1 % Ca - 1 % Sn - 1 % Bi. The electrowinning experiments were conducted using a laboratory-scale apparatus, at a plating time of 4 hours, a current density of 500 to 1000 A/m2, industrial zinc sulfate... 

The electroelastic response of functionally graded piezoelectric cantilever beams which includes the effect of body force is presented in this paper. The material properties such as elastic compliance, piezoelectric and dielectric impermeability are assumed to be graded with different indices in the thickness direction according to exponential distributions. Systems of fourth order inhomogeneous partial differential equations (PDEs) which are satisfied by the stress and induction functions and involve the body force terms are derived. Spectral forms for electrical and mechanical variables in the x-axis are employed to convert the partial differential governing equations and the associated... 

At present, corrugated plates have numerous applications such as web of plate girders and aerospace applications. Higher out-of-plane stiffness and initial elastic strength of the corrugated plates compared with flat plates are reasons for consideration. This study investigates the behavior of trapezoidally corrugated steel plate shear walls (TCSPSWs) under monotonic and cyclic loadings. Finite element analyses that include both material and geometric nonlinearities are employed for the examination. The results from finite element analysis are verified through tested specimen findings. Moreover, the behavior of the steel shear walls with the flat infill panels and the corrugated plate infill... 

In this paper, Plate Frame Interaction (PFI) developed by other researches for modeling Steel Plate Shear Wall (SPSW) is applied for designing a half-scale, single bay and one story SPSW. After designing of SPSW, one specimen is constructed accordingly. In order to determine the mechanical properties of steel, coupon test is performed; and then again theoretical relations based on PFI is re-checked. In this study, gravity loads are neglected and only seismic resistance of SPSW is considered. With cyclic lateral loading as quasi-static load, according to Acceptance Criteria for Cyclic Racking Shear Tests For Metal-Sheathed Shear Walls with Steel Framing (AC154) and obtaining its hysteretic... 

Design and performance of two-stage optical beam shaping system based on a plastic fiberbundle, prism coupled waveguide, is described in this study. Such systems offer practical means to modify and change the output beam shape at two stages and also provide quantitative information concerning the output beam intensity. It is possible to investigate output power and image transmittance data by using a light source for illumination and image analysis by a CCD/digital camera. The photograph picture of the illuminating LED beam shows a circular shape with a diameter of about 10 mm at its output point. Picture of the fiber-bundle output beam is also taken, which shows a rectangular shape with a... 

Structural engineers have recognized unstiffened Steel Plate Shear Wall (SPSW) as an economical lateral resisting system due to the post-buckling capacity, energy dissipation, and deformability. This study investigates practical application of an added Energy Absorbent Element (EAE), subjoined to the SPSW in order to improve seismic behavior of the SPSW. The EAE is an aluminum shear panel with or without bracings and surrounding frame. Furthermore, a series of parametric studies are implemented to examine the effect of dimensions, position, and formation of the EAE. It is assumed that the lateral loading is applied as quasi-static loading. Further, nonlinearity of the material and the... 

For the edge plasma parameters measurement, a movable Langmuir probe is fabricated and installed on the IR-T1 tokamak. The set-up consists of two sets of single Langmuir probes with tungsten tip movable in the radial direction. Edge plasma parameters including electron temperature, Ion density, floating potential and the corresponding radial changes are measured. Using two-point correlation technique clearly reveal that in the SOL region the poloidal propagation of floating potential fluctuation is in the direction of ion diamagnetic drift and in the edge it propagates in the electron diamagnetic drift direction. © 2009 Springer Science+Business Media, LLC  

Manganese Peroxidase (MnP), is one of the most promising lignin depolymerization enzymes, which has been widely used for degradation purposes. Nevertheless, MnP tends to lose activity rapidly during its maintenance phase and degradation process, especially in the inevitable presence of hydrogen peroxide. This study aimed to improve MnP efficiency produced by Phanerochaete chrysosporium, via enhancing its sustainability. In this context, the effects of MnO2, Fe3O4, PEG, Veratryl Alcohol (VA), and DMSO as stabilizing agents on MnP activity were explored both in vivo and in vitro. During in vivo experiments, heterogeneous Fe3O4 was found to be the desirable choice to enhance MnP production,... 

The non-isothermal aging behaviour of a newly developed Al–Zn–Mg–Cu alloy containing 17 wt-% Zn was investigated. Hardness and shear punch tests demonstrated that during non-isothermal aging, the mechanical properties of the alloy first increased and then decreased. The best properties were obtained in a sample which was non-isothermally aged upto 250°C with heating rate of 20°C min−1, due to the presence of η′/η (MgZn2) phases. This was confirmed by differential scanning calorimetery. After homogenisation, residual eutectic phases remained at triple junctions or in a spherical form. During aging, these phases transformed into rodlike S (Al2CuMg)-phase at 400°C, with sizes ranging from 50 to... 

The non-isothermal aging behaviour of a newly developed Al–Zn–Mg–Cu alloy containing 17 wt-% Zn was investigated. Hardness and shear punch tests demonstrated that during non-isothermal aging, the mechanical properties of the alloy first increased and then decreased. The best properties were obtained in a sample which was non-isothermally aged upto 250°C with heating rate of 20°C min−1, due to the presence of η′/η (MgZn2) phases. This was confirmed by differential scanning calorimetery. After homogenisation, residual eutectic phases remained at triple junctions or in a spherical form. During aging, these phases transformed into rodlike S (Al2CuMg)-phase at 400°C, with sizes ranging from 50 to...