Sharif Digital Repository

Findings of economics in last decade shows that social and economic institutions have direct influence on economic performance of a society. However, these institutions are determined by the state. In different regimes, the political power is in the hand of different social groups with different preferences and goals; as a result, different social and economic policies and institutions are take place in different political regimes. In this research, we study economic performance of a society under control of two different political regimes: in first, the majority rules the state and in second, there is a totalitarian regime in which; the political power is concentrated in hand of a group of... 

The role of government in economy has been a controversial subject in economics. Lately, there has been some fundamental change in evaluating this subject. One could mention two of these as 1) realizing the importance of micro-founded macro model for evaluating policy, and 2) taking into consideration the rent-seeking behavior of politicians. In this research, a general equilibrium in a micro-founded macro model will be discussed and then in political economics framework, the effect of government on this equilibrium will be investigated. Only the redistribution role of government has been considered. First, the model in which a benevolent government is seeking optimal policy is Discussed.... 

To investigate boiling heat transfer characteristics of nanofluids, transient quenching¬ experiments of a high temperature silver sphere in water-based nanofluids with Ag and TiO2 nanoparticles were performed. A silver sphere of 10 mm in diameter at the initial temperature of 700o C was quenched in the nanofluids at the temperature of 90o C. The results showed considerable reduction in the quenching ability of nanofluids compared to that of pure water. The presence of nanoparticles in water caused film boiling mode to vanish at lower temperatures depending on the mixture concentration. Computed heat transfer rates in nanofluids were lower than those in pure water. In the quenching... 

With altering natural state and increasing impervious surfaces, traditional urbanization leads to deteriorating the environment and water catchments. During the years most efforts in order to control the urban runoff outflow, have been focused on quantity; and awareness about improving water quality has been raised just in the last few years and, which emphasizes on pollution source control. Standard water quality sampling methods are time consuming, expensive and because of sampling in broad geographic areas, difficult; however modeling is a more efficient way in assessing water quality and as worries about non-point source pollution grows, different kinds of models have been used to... 

The notable share of housing sector in GDP (approximately five percent) shows this sector’s relation with macroeconomic activities. On the other hand, House as an asset leads housing sector to be affected by monetary and fiscal variables. A dynamic panel data was used in this study to evaluate the relations between housing sector and some macroeconomic variables in metropolises of Iran. As results show, in long term growth of liquidity, GDP per capita and sharp ratio have positive effects, and land per capita has negative effect on housing price in metropolises of Iran. Price increases have not been equal in different cities. Inequality of land price between metropolises and between... 

Gini coefficient is the most prevalent index for the measurement of inequality and is usually extracted by means of nominal variables based on income or expenditures of households. In this study we have extracted more accurate Gini coefficients. By using the raw data of Households Budget Survey (HBS) and STATA software, a special CPI for each household of the sample is extracted. Subsequently nominal expenditures are deflated by these special CPIs, and at last, Gini coefficients are extracted from real expenditures. Our findings indicate that in recent years, extracted Gini coefficients are remarkably higher than prevailing ones.
 

In this research, an Index of Iran informal economy in response to the government interventions in credit, labor and product markets is stimated by EMIMIC model. To do this, first these interventions are measured using principal components analysis. In the model, the variables GDP and employment are used as indicators and taxation rates, government distortions in credit, labor and product markets, government expenditure, per capita income, unemployment and inflation as causes of the informal economy. We conclude these government interventions have affected Iran informal economy and their influence is more than indirect interventions influence such as taxation. The estimated index of Iran... 

Analysis and design of power systems are challenging due to ever increasing dimension of the system and also the nonlinearities involved in the system. The conventional approach is to use linear analysis tools and then investigate the nonlinear impacts by the means of computer simulations. This requires great deal of trial and error and it is not always a timely approach. In this project, we initiate a comprehensive nonlinear analysis for a single-machine infinite-bus system by studying a Hopf bifurcation in its dynamics. We use results of our nonlinear analysis to study how a capacitive compensation such as TCSC works. Subsequently, we design a nonlinear controller for a PSS to have... 

In this research, a structural lateral bracing system called ‘Chevron Knee Bracing’ (CKB) on reinforced frames is investigated. This new form of framing system is constructed through the knee and the diagonal brace elements. The diagonal brace component provides the required level of lateral stiffness and stays in the elastic range without buckling at any time. However, the knee part is a fuse-like component that dissipates energy by the formation of plastic flexural and/or shear hinges at its ends and mid-span, when the building is subjected to severe lateral loads. For this purpose, first, by elastic studying of the system, three new and practical parameters are established. Then, the best... 

Nanotechnology is an efficient method suitable for fabrication and production of minimal single dimensional nanometric structures. Such materials and systems can be logically designed that lead to new and optimized biological, chemical and physical properties and characteristics due to their size. Nucleation and growth –appearance of a new phase out of an old phase – is a ubiquitous phenomenon in nature. Fundamental understanding of nanoparticles nucleation and growth mechanism allows more control on form, size and composition and allows tuning of the above said properties easily with use of different reactive conditions as a result of this ability . Nanoparticles of titania are one of... 

Base plate is one of the important and sensitive elements of a structure which roles as a connector of force and moment in column to foundation joint and prevents from stress concentration in the joint area. As until now there has been several numerical and experimental researches conducted about base plate connections, but in practice for design, base plate is considered as a cantilever beam which undertakes compressive force and bending moment. In this method of design many important factors such as separation and deflection of base plate, interaction of base plate with bolts and foundation aren’t taken into consideration. Therefore there is an urgent need to design base plates considering... 

Polymeric membranes based on polyaniline and PVDF were prepared by using cast-solvent film method. The effects of various parameters including polyaniline synthesis temparature, thickness of the PANI/PVDF films and feed pressure were investigated. The results obtained from exprimental data showed increasing permeability with reducing the thickness of the film and increasing feed pressure. Increasing polyaniline synthesis temprature increased the permeability of PANI/PVDF films. Reducing the films thikcness and increasing the feed pressure decreased the selectivity of films for the , and . The results showed increasing selectivity for PANI/PVDF films by using PANI produced at 10°C.... 

Due to important applications and benefits of mass transfer in engineering and especially in nano-scales engineering, nano-science researchers have focused on this field. Considerably, in classical fluid dynamics applications, the fluid can be transported using differential pressure gradient. But the classical methods require moving components, which are usually expensive and not applicable in nano-sizes. To avoid these problems in nano-size transportation, we can use electro-osmotic process to perform mass transfer in low transfer rates. In electro-osmotic process, we can move electrolyte solvent with the aid of an external electrical field. Due to importance of this process in... 

The Overstrength, Ductility and the Response Modification Factor (R) for 70 steel X-braced , Inverted-V-Braced and Offcenter Bracing System frames were evaluated by performing pushover analysis of model structure with various stories (3,6,9,12&15 story) and span length (4,6&8 meter). Some result were compared with those from nonlinear dynamic analysis. According to the analysis result the R factors obtained from nonlinear dynamic analysis are 15% more than obtained from pushover analysis and R factors computed from pushover analysis were generally smaller than the values given in the design codes. R factors in Irregular structure in height are about 90% of R values in regular structure in... 

On the ground, it is necessary to have the values of Response Modification Factor R, Over-strength Factor Ω0, and Deflection Amplification Factor Cd to design seismic-force-resisting systems according to design and loading codes. This study is intended to evaluate these factors for a structural lateral bracing system called Chevron Knee Bracing (CKB). In this type of bracing, the knee elements help the system to dissipate energy through the formation of plastic flexural and/or shear hinges within the presented bracing system. The ap- proach used in this study is according to FEMA P695 based on low probabili- ty of structural collapse and involves nonlinear static and dynamic analyses.... 

Economic performance of resource rich countries is related to their political systems. In this research, consistent to Hosseini (1388), we develop a theoretical model in which we classify the political systems of those countries to four systems based on corruption, myopic behavior of the incumbent, ideological bias of people, and the popularity shocks in elections. We show that in a fixed institutional framework, democracy leads to higher welfare for people and better economic performance. However, in a society with low corruption, high political convergence, and low popularity shocks both democracy and dictatorship maximize the social welfare in the model  

Maghemite (γ-Fe2O3) nanoparticles were produced after high temperature oxidation of gelatin-Fe3O4 nanocomposite, obtained from a common coprecipitation process of Fe2+ and Fe3+ ions in an alkaline medium in the presence of a gelatin protein as an effective mediator. Size, shape, surface morphology and magnetic properties of the prepared γ-Fe2O3 nanoparticles were characterized using XRD, FTIR, TEM, SEM and VSM data. The results revealed that primary, gelatin-Fe3O4 nanocomposite had been formed and next, the gelatin decomposition in furnace produced a spinel structure of γ-Fe2O3. The effects of furnace temperature and time of heating together with the amount of gelatin on the produced... 

Nowadays, too much attention has been paid to Solid Oxide Fuel Cells (SOFC). One of the key components in SOFC is interconnect which plays an important role in SOFC performance. Interconnect can be either a metallic or ceramic layer that sits between each individual cell. The reduction in operating temperature of SOFC resulted in interests in using metallic interconnectors. However, the oxidation of these metallic materials is big challenge. Chromium (Cr), Nickel (Ni) and Iron (Fe) alloys have been employed to overcome this deficiency. However, these alloys bring another difficulty which is the presence of active elements such as Cr which reduces the performance of interconnects by forming... 

In this thesis, Silicon nanowires were synthesized using carbothermal method via Vapor-Liquid-Solid mechanism catalyzed by gold nanoparticles deposited on various substrates. Silicon nanowires just grew on (100) and (111)-oriented silicon substrates. For a particular set of process parameters, we observed a critical thickness of the nucleating gold film, that had depened on a kind of various substrates. We studied the dependence of the Au-Si alloy droplet size and size distribution on the starting gold film thickness and the annealing conditions. We used a modified heating sequence that deconvoluted the effect of various substrates consumption and gas-phase silicon supply on the Au-Si alloy... 

This paper investigates the behavior of the Y-shaped bracing system. Because of the special type of eccentricity in this system, the behavior of the frame is strongly dependent on the geometrical changes of the braces. So that even in the elastic region, it shows the geometrically nonlinear behavior. The amount of eccentricity is very effective on the nonlinear behavior of the frame. Also the ratio of cross sections of the bracing members has a very important impact on the expected performance of the frame. The results show that this system tolerates large displacements, and can act like a base isolation system. Firstly, using a two-dimensional accurate modeling related to the geometrical...