Sharif Digital Repository

Reinforced concrete bridge columns located in regions of high seismicity are designed with large ductility capacity for adequate protection against collapse. This type of design tends to result in large permanent displacements. To maximize post-event operability and to minimize repair costs, new design strategies to reduce these residual displacements are necessary. Even though seismic codes ensure life safety for bridges, large residual displacement after severe earthquake may make the bridge useless. For example, after 1995 Hyogo-ken Nanbu earthquake (Japan), more than 100 reinforced concrete bridge columns experienced a tilt angle of more than 1 degree (1.75% drift). These columns had to... 

The new lateral load resisting system introduced in this dissertation is a kind of squat composite shear wall consisting of a concrete core as filler and two steel corrugated sheets as cover. Reinforced bars are not used in this kind of construction. Load resisting process of the walls is provided by 3 factors: concrete core, steel corrugated covers on both sides of the central core and shear-friction interaction between the core and covers. There is not any specific formula for their design because of their novelty and few researches on this kind of walls and absence of code provisions. In this project, squat composite walls were constructed with dimensions of 106.8×90 (cm2) from corrugated... 

One of the most important parts of a cement factory is the cement rotary kiln which plays a key role in quality and quantity of produced cement. In this part, the physical exertion and bilateral movement of air and materials, together with chemical reactions take place. Thus, this system has immensely complex and nonlinear dynamic equations. These equations have not worked out yet. Only in exceptional case; however, a large number of the involved parameters were crossed out and an approximation model was presented instead. This issue caused many problems for designing a cement rotary kiln controller. In this thesis, we employed a nonlinear system identification method for identification,... 

Because of absence of adequate studies, design of deep beams with web openings has not yet been covered by most codes of practice. The most studies have been on simply supported deep beams with web openings and have been set up experimentally. There are very few tests of continuous deep beams available in the literature. So it was decided in this thesis the behaviour of concrete continuous deep beams with web openings using finite element software ANSYS to be investigated. Primary purpose of this thesis has been evaluating the use of finite element analysis method for analysis of concrete continuous deep beams with web openings. The next target of this thesis has been assessment of... 

Acidity values of some compound (e.g., alkanes, alcohols, carboxylic acids and amines) with or without boron substitute have been studied theoretically to evaluate the influence of boron on acidity of organic functional groups. We have derived the unoccupied reactive orbital that show the maximum localization on the boron pπ atomic orbital overlapping with the lone-pair orbital of an electron donor. Localization of unoccupied reactive orbital on the boron pπ atomic and the polarizability of the boron center are two factors which affect acidity values of functional groups. Conformational searching was performed using MM (Molecular Mechanics). The most important conformations were optimized at... 

Poincare conjecture is one of the rst eorts for classifying 3-manifolds that was stated in the begining of 20th century. Eorts for proving this conjecture continued for about 100 years and nally Perelman has solved it in 2003. He has used Ricci ow which has been invented by Richard Hamilton in the early 80's. In this thesis rst we will introduce Ricci ow and will state the results before Perelman such as short time and long time existence of solution. Then we will mention some applications of Ricci ow and will state an explanation of the proof of uniformization and Calabi conjecture by Ricci ow. After that we start the main part of the thesis. In this part we will montion one of the... 

A tsunami is a series of tides most commonly caused by the deformation of the sea floor during a submarine earthquake. They are extremely long waves with the distance between successive peaks or troughs on the order of 10’s to 100’s of miles. They are also generated by landslides, volcanic eruptions or more rarely by asteroid impact. These causes change in location on the surface of the water which in turn creates numerous waves that spread out from the zone of turbulence. Few current design codes for coastal structures include tsunami. Even those that do, the bases for taking the hydrodynamic loads into the design are often grossly simplified and may be overly conservation and/or... 

Post-tensioning is the most versatile form of prestressing, a technique which enables engineers to make the most effective use of the material properties of concrete, and so to design structural elements which are strong, slender, and efficient. Design of post-tensioned concrete structures is not difficult and, if done properly can contribute significantly to the economy and the aesthetic qualities of a structure. Post-tensioned building floors and bridge girders have found widespread use in office buildings, parking structures and bridges. They are also frequently employed in warehouses and public buildings. Now a days bridges and other type of structures, in many countries are designed... 

Using mixed building system of structural steel and reinforced concrete improves the resistance of the structure in comparison with using either material alone. Coupled shear walls is one of these new systems. Coupled shear walls by definition is a series of walls coupled by beams as a central core structure with opening to accommodate doors, elevator wells, windows and corridors. Coupled shear walls can provide an efficient structural system to resist horizontal force due to axial and seismic loads. One type of coupled beams is Steel Coupling Beams (SCB) which consists of steel beams and reinforced concrete shear walls which represents a cost and time-effective type of construction. Some... 

Nowadays best using of fossil fuels sources of the country (and) importance of comparison against lack of capacity in petrol production make determined the programmers and the directors to foresee and design expanded programs of the goals, to use natural gas for car fuels. To reach fulfillment of these programs, the confirmed needs of the natural gas cylinders are improved and make it essential to invest on producing compressive natural gas cylinders. In this way economical and technical change researches has been done in order to construct on department to produce 200,000 compressive natural gas cylinders in a year during two sets.(shifts) According to the results of technical researches... 

Different molybdenum oxide nano/micro structure thin films were synthesized by thermal evaporation method under various growth conditions such as deposition time, temperature and evaporation source-substrate distance. Molybdenum oxide nanostructures grown on Si(100) such as nanowalls, nanostars and nanowires were characterized with scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), atomic force microscopy (AFM) and high resolution transmission electron microscopy (HRTEM). Shape and type of nanostructures were determined with SEM, AFM and HRTEM analysis. XPS analysis showed that the synthesized nanostructures contained Mo6+, Mo5+, Mo4+ and... 

ZnO is a wide and direct band gap (3.37 eV) semiconducting material with a large exciton binding energy (60 meV). It has been extensively studied in the last few years owing to its potential applications in various fields such as surface acoustic wave devices (SAW), transparent electrode, solar cell windows, photovoltaic devices, gas sensors and photoelectrochemical cells. Recently, much attention has been paid to rare-earth (RE) doped ZnO for possible applications in visible emitting phosphors in displays, high power lasers, and other optoelectronic devices. In this thesis, initially ZnO thin films were deposited on glass and ITO substrates using sol-gel dip-coating method. Optical and... 

It is believed that intramolecular hydrogen bonding and also conjugation can affect the acidity power of organic molecules. But simultaneous effects of intramolecular hydrogen bonding and conjugation have not investigated systematically yet. In this project, we choose Ascorbic acid as a basic structure. Then we have changed its structure conveniently, and have explored the roles of hydrogen bonding and conjugation on the acidity of this molecule by using B3LYP functional with the 6-311++G(d,p) basis set. After that we similarly investigate these effects on the acidity of three different systems, including enols, enamines and alcohols. In this project we probe the effect of different hydrogen... 

Over the Recent Decade, the embedded systems have expanded to include a wide variety of products, ranging from digital cameras, to medical systems, to Radar and telecommunication systems, to sensor networks. Engineers strive to create ever smaller and faster products, many of which, such as battery operated systems, have stringent power requirements. Coupled with increasing pressure to decrease costs and time-to-market, the design constraints of embedded systems pose a serious challenge to embedded systems designers. Dynamic reconfigurable hardware can provide a flexible and efficient platform for satisfying the area, performance, cost, and power requirements of many embedded systems.... 

An interesting theoretical and practical set of problems in computer science is concerned with the study of spatial relations among objects in a geometric space. Examples of such problems for a set of points P are finding the closest pair of the points P, partitioning space into regions such that all points of a region have minimum distance to the same point in P, and computing the Euclidean minimum spanning tree on P. Moreover, we need mechanisms to efficiently update these properties when the points P are allowed to move or may be inserted or deleted. This is to avoid re-computation of these properties from scratch. Here, we consider the Euclidean minimum spanning tree (EMST) of a set of... 

The purpose of this study was to find out the effective factors on customer satisfaction and its consequences in Kish Island (IRAN).In this research the researcher had used two different kind of sample the first sample is customers of three different hotels of 3 star, 4 star, 5 star and The second sample are managers of these hotels. The sample size was 285 of hotel customers and 11 of hotel managers. The first purpose of this study was to identify the drivers and results of customer satisfaction and also identifying there relationship with customer satisfaction. The second goal of this study was to propose a customer satisfaction model for hotel industry in kish island (IRAN). In this... 

Synthesis, characterization and photocatalytic applications of core-shell like ZnO@CdS nanorods have been studied in this research. The synthesis of core-shell like ZnO@CdS nanorods was carried out in three different steps. At first, ZnO seed layer was formed on glass substrate via sol-gel process under optimum conditions using absolute ethanol solution containing zinc acetate and a stabilizer ( either Monoethanolamine (MEA) or diethanolamine (DEA)). When MEA used as stabilizer, the optimum concentration of sol was found 0.2 M, while increasing the sol concentration caused the seed layer to be grown in a string-like structure. The RMS surface roughness of seed layer prepared by 0.2 M sol... 

Shear wall has been widely used in RC structures due to high initial stiffness and lateral load capacity. Hence, the behavior and effectiveness of retrofitting technique on shear wall are needed to be investigated widely. Among several available techniques for retrofitting RC structures, fiber reinforced polymer (FRP) is quite effective because of its high strength-weight ratio, high resistance to corrosion and easy handling and installation. Several researchers have investigated on the behavior of retrofitted RC members with FRP jackets like columns. However, application of FRP laminates on RC walls has attracted less attention by researchers. In this study a numerical investigation on... 

Dealing with uncertainty in demand, Seasonal product retailers have to make two important decisions. The first one is pricing of the products during their selling season and the second issue is the inventory level and also reordering decisions during the aforementioned period. It is worth mentioning that all products are using a shared capacity which left us barehanded with the pricing and optimizing inventory levels independently. In this thesis, a new model for retailers is presented which includes demand learning and determines optimal prices and inventory policies for multiproduct industries  

Many embedded processors are used in harsh environments and their behavior should be investigated against the incidence of common faults. Fault Injection is a prevalent method to do this investigation. Simulation-based fault injection is one of the most prominent forms of fault injection. A fault model is required to do simulation-based fault injection. Simulated faults should have the most similarity to the real faults. Temperature variation and in the extreme case thermal shock is one of the probable faults in harsh environment. In this thesis, we want to propose fault models for thermal shock in various abstraction levels, evaluate and compare these fault models and present methods to use...