Sharif Digital Repository

We study a classical problem in communication and wireless networks called Finding White Space Regions. In this problem, we are given a set of antennas (points) some of which are noisy (black) and the rest are working fine (white). The goal is to find a set of convex hulls with maximum total area that cover all white points and exclude all black points. In other words, these convex hulls make it safe for white antennas to communicate with each other without any interference with black antennas. We study the problem on three different settings (based on overlapping between different convex hulls) and find hardness results and good approximation algorithms  

Hybrid nanofluids have several advantages compared with the conventional types due to their modified properties. Their enhanced thermophysical and rheological properties make them more appropriate for solar energy systems. In this review paper, an overview of solar energy systems is represented, and afterwards, applications of hybrid nanofluids in various solar technologies, especially solar thermal, are reviewed. Comparison between the nanofluidic systems, and the conventional ones is performed in order to gain a deeper insight into the advantages of using nanofluids. According to the results of the reviewed studies, the most important reason for performance enhancement of nanofluidic solar... 

Urmia Lake River Basin (ULRB) is one of the most important habitats in the world and one of the major agricultural regions in Iran. On average, the ratio of irrigation to evapotranspiration in this basin is more than 73%. Investigating the irrigation water requirement pattern changes and the spatial distribution of evapotranspiration during the basin development period on a regional scale play important roles in understanding the basin situation. In this study, the actual evapotranspiration has been estimated by SEBAL model. By estimating the precipitation distribution in the basin, the agricultural irrigation water requirement pattern has been calculated using the land use map in 1995, 2010... 

A method is developed for in situ generation of 1,3-dioxan-5-one derivatives 2. These compounds are simple precursors for accessing carbohydrate structures and previously had to be produced via stepwise procedures using excessive amounts of reagents. In the present work, three different derivatives of 2 were synthesized via the reaction of trialkoxyalkanes with dihydroxyacetone dimer 1 in the presence of acetic acid as the catalyst. In the same pot, derivatives of 2 were reacted with aromatic aldehydes and 30 mol% of pyrrolidine to obtain high yields of the respective bischalcones 3 within short time periods. © 2019 M. Javad Poursharifi et al., published by De Gruyter 2019  

Multiple-input multiple-output (MIMO) radars have attracted much attention for their superior ability to enhance a system's performance. In this study, the authors' goal was the study of the spatial multiplexing gain of MIMO radars with widely separated antennas (WS-MIMO), which the authors showed that is equal to the number of unambiguously detectable targets. They obtained this number from two different aspects: first, by defining the ambiguity function of a WS-MIMO radar in the case of multiple targets, suitable for such purpose; Second, by modelling the MIMO radar system with a MIMO wireless channel. They showed that a MIMO radar is indeed a MIMO wireless system communicating the... 

Two gains play key roles in recently developed multiple-input-multiple-output (MIMO) wireless communication systems: 'spatial diversity' gain and 'spatial multiplexing' gain. The diversity gain (DG) refers to the capability to decrease the error rate of the MIMO channel, whereas the multiplexing gain (MG) implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the DG) and increasing data rate (via an increase in the MG). On the other hand, recently, MIMO radars have attracted much attention for their superior... 

Structures of tapered geometry are customarily used in a variety of applications. The analysis of such structures is usually made through finite element method using traditional beam, shell or brick elements. In this paper, a new tapered superelement is presented that lends itself to modeling revolving geometries under lateral, axial and torsional loads. The presented tapered superelement has 16 nodes. The performance of this element under static and dynamic loading and in rotating condition is examined. It is shown that this element yields accurate results with higher computational efficiency compared to conventional elements. Furthermore, it is verified that a single tapered superelement... 

This research has modelled a queuing system with no standard states. In order to analyse these systems, some parameters such as the mean of waiting time and the length of queue are computed. These situations usually occur when there is delay in the service, for example, in the gas queuing system that cars are unable to leave after receiving the required services due to the presence of other cars in front of them. These kinds of non-standard queuing systems are usually applied to the assembly and production lines. In this paper, a queuing model for the special non-standard state queuing system is developed to be used in gas stations. The proposed model is implemented in fuel stations in Iran... 

A molybdenum complex, [MoO2Cl2(DMSO)2], was immobilized on amino propyl and Schiff base modified magnetic Fe3O4@SiO2 nanoparticles by covalent linkage. The resulting nanoparticles were used as efficient and recyclable catalysts for the selective oxidation of sulfides to sulfoxides using urea hydrogen peroxide as the oxidant. The complete characterization of catalysts was carried out by means of thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), elemental analysis, FT-IR and Raman microprobe... 

Hydrogen storage/evolution behavior of nafion/NaCl/graphene quantum dot (GQD) mixed matrix as selective hydrogen capacitor (power source) was evaluated in detail through an electrochemical process at two independent potential ranges. For this purpose, a three-electrode system included Pt disk as counter electrode, Ag/AgCl as reference electrode and GQD-based mixed matrix-modified Pt disk as working electrode. For hydrogen storage, the deposition potential and time were evaluated to −1.0 V (vs. Ag/AgCl) and 120 s, respectively under high basic solution generated using NaOH (1.0 M) solution, followed by evolution of hydrogen at +0.8 V (vs. Ag/AgCl) during formation of hydrogen bubbles. The... 

Genetic algorithm for optimization of beam forming in spiral array antenna is used. The goal is to achieve a -20 dB in null over the wide frequency band. Our simulation shows -20 dB over 75 MHz Null Band width, in VHF band. © 2006 IEEE  

This paper studies the placement of antennas in presence of mountains for widely separated multiple-input multiple-output (MIMO) radar. One of the challenges in this configuration is proper placement of the receive antennas in order to achieve good performance. We derived Neyman-Pearson decision rule for target detection. Via several scenarios we show that proper placement of receivers can provide better performance  

Purpose - This paper aims to present the design and implementation of VirSense, a novel six-DOF haptic interface system, with an emphasis on its gravity compensation and fixed-base motors. Design/methodology/approach - In this paper, the design and manufacture of the VirSense robot and its comparison with the existing haptic devices are presented. The kinematic analysis of the robot, design of the components, and manufacturing of the robot are explained as well. Findings - The proposed system is employed to generate a Virtual Sense (VirSense) with fixed-base motors and a spring compensation system for counterbalancing the torques generated by the weight of the links. The fixed bases of the... 

Nanotechnology is widely used in heat transfer devices to improve thermal performance. Nanofluids can be applied in heat pipes to decrease thermal resistance and achieve a higher heat transfer capability. In the present article, a comprehensive literature review is performed on the nanofluids’ applications in heat pipes. Based on reviewed studies, nanofluids have a high capacity to boost the thermal behavior of various types of heat pipes such as conventional heat pipes, pulsating heat pipes, and thermosyphons. Besides, it is observed that there must be a selected amount of concentration for the high-performance utilization of nanoparticles; high concentration of nanoparticles causes a... 

In this paper, we report that a known dinuclear Fe complex, [tpa(H2O)FeOFe(H2O)tpa](ClO4)4 (tpa: tris(2-pyridylmethyl)amine), is an efficient catalyst toward organic sulfide oxidation in the presence of urea-hydrogen peroxide  

Recently, it has been shown that applying MIMO technology, i.e. using multiple antennas at the transmit side and multiple antennas at the receive side, improves the performance of object detection and localization. In such scenarios, the spatial diversity specifically helps overcome the fading of the cross section of the object, leading to reduced probability of missed detection. Such a phenomenon is, in fact, the dual of probability of bit error reduction in communication systems due to diversity gain. Despite the importance of such performance enhancement, this subject has not been sufficiently investigated in the PCL (Passive Coherent Location) schemes, where the transmitters (or... 

As the DVB-T (Digital Video Broadcasting-Terrestrial)'s use is outspreading, one of its interesting emerging applications is to use DVB-T stations as non-cooperative transmitters in order to detect and localize targets. An important and favorable characteristic of DVB-T for this application is its being working in a Single Frequency Network (SFN), so that multiple transmitters can be used simultaneously to detect the targets. In addition, using multiple antennas at the receiver side leads to the well known configuration known as MIMO. However, one of the obstacles, arisen in such configurations, is the receive antennas' placement in proper positions so that the detection performance is... 

Using multiple illuminators of opportunity at the transmit side and multiple antennas at the receiver side in a passive coherent location (PCL) scheme is expected to improve the detection performance. However, in such multiple-input multiple-output (MIMO) configuration choosing the position of the receivers is an obstacle that can have significant influence on the resulting performance. In this study, the authors consider the case of digital video broadcast (DVB)-T stations as non-cooperative transmitters and introduce a procedure based on the probability of missed detection to properly place receive antennas in a MIMO digital video broadcasting (DVB)-T based PCL configuration  

Knowledge about the non-linear dynamical pattern of postural sway may provide important insights into the adaptability (flexibility) of human postural control in response to everyday stresses imposed on the body. A commonly used non-linear tool, i.e. recurrence quantification analysis, was chosen to investigate the effect of prior anterior cruciate ligament injury on the deterministic pattern of postural sway under different conditions of postural and cognitive difficulty. In double leg stance, as postural difficulty increased from open-eyes to closed-eyes and rigid-surface to foam-surface, the centre of pressure regularity (%determinism) increased as well. In comparison to healthy...