Sharif Digital Repository

We study the role of correlation in mechanisms of energy exchange between an interacting bipartite quantum system and its environment by decomposing the energy of the system to local and correlation-related contributions. When the system Hamiltonian is time independent, no external work is performed. In this case, energy exchange between the system and its environment occurs only due to the change in the state of the system. We investigate the possibility of a special case where the energy exchange with the environment occurs exclusively due to changes in the correlation between the constituent parts of the bipartite system, while their local energies remain constant. We find sufficient... 

Online monitoring of HV XLPE cables is a major interest for utilities. Due to severe and rapid risk of life of this type of cable with occurrence of partial discharges, studies are carried out for detection and location of PD. However there is a lack of models that can help to accurately detect the partial discharge and its location in installed cables, due to the relatively long length and the load condition of cable. Detection and location of any partial discharge signal requires: A verified knowledge of phenomena which contributes to P.D. propagation and its deformation, measured data of P.D. type signal propagation on different cable test setups, accurate frequency dependent cable model... 

Reviewing the various Partial Discharges (PD data mining researches which have been reported so far, this study compares the performance of different feature spaces and different classifiers employed for PD classification in insulation condition monitoring of power transformers. In this process, first a knowledge basis is developed through construction of 4 different types of PD models in the high voltage laboratory. Background noise is considered as one class in this knowledge basis. The high frequency time domain current signals of high voltage equipment are captured over one power frequency cycle. The single PD activities within this captured signal are extracted by application of a... 

Suggestion and application of a set of new features for on-line Partial Discharge (PD) monitoring, where there is no information about the type of PD is a challenging task for condition assessment of power equipments, such as a power transformer. This is looked for in this paper. So far, in past various techniques have been employed to develop a comprehensive PD monitoring system, however limited success has been achieved. One of the challenging issues in this field is the discovering of proper features capable of differentiating the involvement of possible types of PD sources. In order to examine the efficiency of the method established in this paper, which is based on application of a set... 

In this study, the homotopy analysis method is used to obtain an accurate analytical solution for fundamental non-linear natural frequency and corresponding displacement of tapered beams. Comparison between the obtained results and numerical solutions shows that the first-order approximation of present study leads to accurate solutions with a maximum relative error less than 0.5%  

Ground reaction force (GRF) characteristics of amputee walking are important for the analysis of clinical gait data, and also to update model reference adaptive impedance (MRAI) controllers. GRF estimation is a better alternative than direct GRF measurement because of the disadvantages of load cells, such as high cost, integration difficulties due to weight and physical dimensions, the possibility of overload, and measurement noise. This paper presents four robust MRAI observer/controller combinations for GRF estimation-based control of a prosthesis and a legged robot model in the presence of parametric uncertainties and unmodeled dynamics, in which the robot model is employed to mimic... 

Non-pumping reactive wells (NPRWs) filled by zero-valent iron (ZVI) can be utilized for the remediation of groundwater contamination of deep aquifers. The efficiency of NPRWs mainly depends on the hydraulic contact time (HCT) of the pollutant with the reactive materials, the extent of the well capture zone (Wcz), and the relative hydraulic conductivity of aquifer and reactive material (Kr). We investigated nitrate removal from groundwater using NPRWs filled by ZVI (in nano and micro scales) and examined the effect of NPRWs orientations (i.e. vertical, slanted, and horizontal) on HCT and Wcz. The dependence of HCT on Wcz for different Kr values was derived theoretically for a homogeneous and... 

One of the main requisites for multi agent researchers is a multi-purpose infrastructure that enables them to create, test and evaluate protocols, methods and algorithms. RoboCupRescue simulation environment is a flexible and configurable environment that can fill this gap. With changes in its configuration files, it will gain different features, so different methods can be designed, implemented, and tested. This environment is actually suitable for most multi-agent research issues such as cooperation, coordination, agent communication languages, and agent micro level issues. Sensible roles and tasks in the system motivate more research and make this environment a suitable infrastructure for... 

Ground reaction force (GRF) characteristics of amputee walking are important for the analysis of clinical gait data, and also to update model reference adaptive impedance (MRAI) controllers. GRF estimation is a better alternative than direct GRF measurement because of the disadvantages of load cells, such as high cost, integration difficulties due to weight and physical dimensions, the possibility of overload, and measurement noise. This paper presents four robust MRAI observer/controller combinations for GRF estimation-based control of a prosthesis and a legged robot model in the presence of parametric uncertainties and unmodeled dynamics, in which the robot model is employed to mimic... 

This paper presents the measurements results of simulated partial discharge propagation on a compact three phase XLPE cable, and shows how the high frequency signal on one phase of the cable is induced on the other two phases. A frequency dependent three phase cable model is employed to simulate this phenomena. © 2008 Australasian Universities Power Engineering Conference (AUPEC'08)  

Due to the presence of excessive noise in the recorded partial discharge (PD) current signals, de-noising of these signals is a crucial task for performing any investigation on the subject. Meanwhile, to accelerate this de-noising process a single PD pulse can be extracted from the train of those recorded pulses, followed by its de-noising. In this paper a single PD pulse is extracted from the train of recorded PD pulses, using noisy recorded data cumulative energy. A de-noising technique based on adaptive neuro-fuzzy inference systems is proposed. To verify the validity of the proposed method, four different sources of PD signals are physically simulated. The proposed method is applied on... 

In this study, an accurate analytical solution for the nonlinear free vibration of a conservative oscillator with inertia and static type cubic nonlinearities is derived. This solution has been obtained using homotopy analysis method (HAM). Then, homotopy Pade technique is applied to accelerate the convergence rate of the series solution. This study shows that the HAM leads to an accurate analytical solution, which is valid for a wide range of considered system parameters. Unlike the other analytical methods, HAM can control and adjust the convergence region and rate of the approximation series solution. The excellent accuracy of the current results is demonstrated by comparing with the... 

Given the evolution of an arbitrary open quantum system, we formulate a general and unambiguous method to separate the internal energy change of the system into an entropy-related contribution and a part causing no entropy change, identified as heat and work, respectively. We also demonstrate that heat and work admit geometric and dynamical descriptions by developing a universal dynamical equation for the given trajectory of the system. The dissipative and coherent parts of this equation contribute exclusively to heat and work, where the specific role of a work contribution from a counterdiabatic drive is underlined. Next we define an expression for the irreversible entropy production of the... 

KeeLoq remote keyless entry systems are widely used for access control purposes such as garage openers or car door systems. We present the first successful differential power analysis attacks on numerous commercially available products employing KeeLoq code hopping. Our new techniques combine side-channel cryptanalysis with specific properties of the KeeLoq algorithm. They allow for efficiently revealing both the secret key of a remote transmitter and the manufacturer key stored in a receiver. As a result, a remote control can be cloned from only ten power traces, allowing for a practical key recovery in few minutes. After extracting the manufacturer key once, with similar techniques, we... 

The goal of this research is to formulate an inventory control problem of a single item with variable demand dependent on displayed stock level and selling price of the commodity. The item deteriorates based on a three-parameter Weibull distribution and advance payment is needed to purchase the item with the all-unit discount policy. Shortages are allowed partially and backlogged with the rate dependent on the length of customers' waiting time. The corresponding problem is formulated as a profit maximisation model. For solving this problem, four different variants of particle swarm optimisation (PSO) are utilised. Then, the application of the model is illustrated with the help of a numerical... 

Partial discharges (PD) are recognized as the main cause of the inner insulation deterioration process in power transformers. Therefore, the optimum inner insulation design is one of the challenges a transformer designer is faced with. Transformer strength, especially during transient conditions, is a criterion for transformer insulation designers. This challenge has made designers initiate and employ other types of winding, for example, rather than ordinary layer and disc windings employ the multiple-α windings. Multiple-α windings have a more complicated structure and are comprised of various parts with different physical structures and electrical characteristics. Typical partial discharge... 

A review of worldwide activities in liquid-fed pulsed plasma thruster (LPPT) is discussed. Pulsed plasma thruster are extensively recognized as one of the most promising electric space propulsion systems to perform propulsive tasks on micro- and nanosatellites, including cubesats, because they offer many advantages compared with other electric space propulsion systems. The low plasma exhaust velocity measured by a Langmuir probe showed that thrust is mainly produced by 0.3 μg mass ionized by the first trigger and a much greater quantity of propellant introduced by the main discharge remained neutral at low speed. Various propellant feeding and discharge initiation methods have been applied... 

Purpose - The purpose of this paper is to comprehensively review most of the significant works ever done worldwide to study the effects of essential parameters on pulsed plasma thruster (PPT) performance and to analyze the effects of each parameter on PPT performance. Design/methodology/approach - All the important works studying PPT performance are categorized by the parameter they have studied and its effect on the thruster performance, and their works have been reviewed to analyze the influence of each parameter. Findings - The analysis leads to elucidation of the effects of different geometrical parameters including aspect ratio, electrode width, electrode spacing, electrode shape,... 

Reliability methods are employed in this paper to analyze the seismic risk to the Vancouver metropolitan region in Canada. The use of reliability methods contrasts with several contemporary approaches for risk analysis. In this paper, two analysis approaches are presented and implemented in a new computer program. One utilizes the first-order and second-order reliability methods together with a hazard combination technique. The other is a sampling-based method that repeatedly generates damage scenarios in the time period of interest. Both strategies employ the same collection of probabilistic models for seismic risk analysis. While the models are presented in the companion paper, this paper...