Sharif Digital Repository

The effects of hydrophilic and hydrophobic nanosilica (SiO2) on the morphology, mean diameter distribution of fibers, mechanical and piezoelectric properties of poly (vinylidene fluoride) (PVDF) nanofibers were studies. We prepared Nanofibers by the electrospinning of PVDF solutions containing 1.5 wt.% both hydrophilic and hydrophobic nano-SiO2 loadings. Morphology and diameter distribution of the electrospun nanofibers were studied using field emission scanning electron microscopy (FE-SEM) analysis. Tensile test was used to study the effect of both types of nanosilica on the tensile strength, young's modulus and strain at break. Piezoelectric characterization of the electrospun fibers were... 

In order to determine the activity of C137s in soil resulting from nuclear accidents or fallouts, the best choice is to use HPGe detectors due to their best energy resolutions. In this regard, in order to enhance the detection efficiency, the Marinelli beakers have been used to increase the radiation interaction with the sensitive volume of the detector. In previous works, to optimize the dimension of Marinelli beakers, the assumption was that the emission rate of the source is homogeneous in beaker volume. In the present study, to investigate the effect of the inhomogeneous emission rate of the source on the optimum dimensions of the beaker, in a simple case, the beaker was divided into two... 

Background: Nowadays, study and application of modified membranes for water treatment have been considered significantly. The aim of this study was to prepare and characterize a polysulfone (PSF)/graphene oxide (GO) nanocomposite membrane and to evaluate for arsenate rejection from water. Materials and methods: The nanocomposite PSF/GO membrane was fabricated using wet phase inversion method. The effect of GO on the synthesized membrane morphology and hydrophilicity was studied by using FE-SEM, AFM, contact angle, zeta potential, porosity and pore size tests. The membrane performance was also evaluated in terms of pure water flux and arsenate rejection. Results: ATR-FTIR confirmed the... 

The main purpose of this paper is modeling and simulation of in-situ releasing of smart nano-sized core-shell particles at the water-oil interface during polymer flooding. During the polymer flooding process, when these nano-particles reach the water-oil interface, migrate to the oil phase and the hydrophobic layer of them dissolves in this phase. After dissolution of this protective nano-sized layer, the hydrophilic core containing a water-soluble ultra high molecular weight polymer diffuses back into the water phase and with dissolving in this phase, dramatically increases viscosity of flooding water in the neighborhood of the water-oil interface. In this study, two different... 

IN738LC is one of the superior nickel base superalloys utilized at high temperatures in aggressive environments. However, experiencing high temperatures and stresses during service causes microstructure deterioration and degradation of mechanical properties in this alloy. To restore the microstructure and mechanical properties of the degraded alloy, rejuvenation heat treatments can be considered. In this study, the evolution of microstructural features in a creep damaged IN738LC superalloy during different stages of rejuvenation heat treatment cycles was investigated. During solution treatment stage, dissolution of coarsened γ′ precipitates, grain boundary films and transition zone around... 

The present study investigates the evolution of γ′ precipitate microstructure in a creep damaged IN738LC superalloy during different stages of rejuvenation heat treatment cycles. Dissolution of coarsened γ′ precipitates in the creep damaged alloy occurred during different solution treatments. The precipitates that did not dissolve completely during solution treatment and those formed during subsequent cooling were considered to be as remnant and cooling precipitates respectively. It was found that higher solution treatment temperatures result in lower volume fraction of remnant precipitates and further formation of cooling precipitates. Slower cooling rates after solution treatment gave the... 

This paper reports on the development of conductive porous scaffolds by incorporating conductive polyaniline/graphene (PAG) nanoparticles into a chitosan/gelatin matrix for its potential application in peripheral nerve regeneration. The effect of PAG content on the various properties of the scaffold is investigated and the results showed that the electrical conductivity and mechanical properties increased proportional to the increase in the PAG loading, while the porosity, swelling ratio and in vitro biodegradability decreased. In addition, the biocompatibility was evaluated by assessing the adhesion and proliferation of Schwann cells on the prepared scaffolds using SEM and MTT assay,... 

An increasing trend for reducing cost, space, and weight leads to modern embedded systems that execute multiple tasks with different criticality levels on a common hardware platform while guaranteeing a safe operation. In such mixed-criticality (MC) systems, multiple worst case execution times (WCETs) are defined for each task, corresponding to the system operation mode to improve the MC system's timing behavior at runtime. Determining the appropriate WCETs for lower criticality (LC) modes is nontrivial. On the one hand, considering a very low WCET for tasks can improve the processor utilization by scheduling more tasks in that mode, on the other hand, using a larger WCET ensures that the... 

An increasing trend for reducing cost, space, and weight leads to modern embedded systems that execute multiple tasks with different criticality levels on a common hardware platform while guaranteeing a safe operation. In such Mixed-Criticality (MC) systems, multiple Worst-Case Execution Times (WCETs) are defined for each task, corresponding to system operation mode to improve the MC system’s timing behavior at run-time. Determining the appropriate WCETs for lower criticality modes is non-trivial. On the one hand, considering a very low WCET for tasks can improve the processor utilization by scheduling more tasks in that mode, on the other hand, using a larger WCET ensures that the mode... 

In Mixed-Criticality (MC) systems, there are often multiple Worst-Case Execution Times (WCETs) for the same task, corresponding to system operation mode. Determining the appropriate WCETs for lower criticality modes is non-trivial; while on the one hand, a low WCET for a mode can improve the processor utilization in that mode, on the other hand, using a larger WCET ensures that the mode switches are minimized, thereby maximizing the quality-of-service for all tasks, albeit at the cost of processor utilization. Although there are many studies to determine WCET in the highest criticality mode, no analytical solutions are proposed to determine WCETs in other lower criticality modes. In this... 

In this paper, modeling and control of a new cable-driven robot is presented. In this mechanism, the cable arrangement eliminates the rotational motions leaving the moving platform with three translational motion. The mechanism has potentials for large scale manipulation and robotics in harsh environments. In this article kinematics and dynamics models for the proposed cable-driven architecture are derived. Additionally, Feedback linearization under input constraints is used for the control of the robot. The control algorithm ensures the cable tensions are positive while minimizing the sum of all the torques exerted by the actuators. Finally, the implementation of the proposed method is... 

A multi-item multiperiod inventory control model is developed for known-deterministic variable demands under limited available budget. Assuming the order quantity is more than the shortage quantity in each period, the shortage in combination of backorder and lost sale is considered. The orders are placed in batch sizes and the decision variables are assumed integer. Moreover, all unit discounts for a number of products and incremental quantity discount for some other items are considered. While the objectives are to minimize both the total inventory cost and the required storage space, the model is formulated into a fuzzy multicriteria decision making (FMCDM) framework and is shown to be a... 

A mesophilic iron oxidizing bacterium, Acidithiobacillus ferrooxidans, has been isolated (33 °C) from a typical chalcopyrite copper concentrate of the Sarcheshmeh copper mine in the region of Kerman located in the south of Iran. In addition, a thermophilic iron oxidizing bacterium, Sulfobacillus, has been isolated (60 °C) from the Kooshk lead and zinc mine near the city of Yazd in central Iran. Effects of some variable parameters such as solids concentration, temperature and pH on the bioleaching of chalcopyrite obtained from Sarcheshmeh copper mine were investigated. Bioleaching experiments were carried out in two batch airlift bioreactors with a recycling stream. The results indicate that... 

Intermittency of height fluctuations in stationary state of the Kardar-Parisi-Zhang (KPZ) equation with infinitesimal surface tension in 1+1 dimensions was discussed. Stochastic differential equations were used for the study. It was found that the probability density function [in 1+1] is independent of the coefficient of the linear term. When the random force with smooth spatial correlation was considered, the problem changed to a more complicated one  

The Kardar-Parisi-Zhang (KPZ) equation with infinitesimal surface tension, dynamically develops sharply connected valley structures within which the height derivative is not continuous. We discuss the intermittency issue in the problem of stationary state forced KPZ equation in [Formula presented] dimensions. It is proved that the moments of height increments [Formula presented] behave as [Formula presented] with [Formula presented] for length scales [Formula presented]. The length scale [Formula presented] is the characteristic length of the forcing term. We have checked the analytical results by direct numerical simulation. © 2004 The American Physical Society  

Efficient management of supply chain (SC) requires systematic considerations of miscellaneous issues in its comprehensive version. In this paper, a multi-periodic structure is developed for a supply chain network design (SCND) involving suppliers, factories, distribution centers (DCs), and retailers. The nature of the logistic decisions is tactical that encompasses procurement of raw materials from suppliers, production of finished product at factories, distribution of finished product to retailers via DCs, and the storage of raw materials and end product at factories and DCs. Besides, to make the structure more comprehensive, a flow-shop scheduling model in manufacturing part of the SC is... 

A new-designed surfactant was prepared with capability of tolerating high saline formation water and real oil reservoir conditions. The specific emulsion behavior of this new chemical was investigated by doing all sets of emulsion stability and emulsion behavior tests in presence of different alkalis. Four types of alkalis (Sodium Hydroxide, Sodium Carbonate, Sodium Metaborate, and Triethanolamine) were mixed with the surfactant and their combined effect on aqueous-oil emulsion behavior was inspected. The experimental results shoine formation water and real oil reservoir conditions. The specific emulsion behavior of this new chemical was investigated by doing all sets of emulsion stability... 

Observability of bulk power transmission network by means of minimum number of phasor measurement units (PMUs), with the aid of the network topology, is a great challenge. This paper presents a novel equivalent integer linear programming method (EILPM) for the exhaustive search-based PMU placement. The state estimation implemented based on such a placement is completely linear, thereby eliminating drawbacks of the conventional SCADA-based state estimation. Additional constraints for observability preservation following single PMU or line outages can easily be implemented in the proposed EILPM. Furthermore, the limitation of communication channels is dealt with by translation of nonlinear... 

Communication overhead is one of the major performance bottlenecks in large-scale distributed computing systems, in particular for machine learning applications. Conventionally, compression techniques are used to reduce the load of communication by combining intermediate results of the same computation task as much as possible. Recently, via the development of coded distributed computing (CDC), it has been shown that it is possible to enable coding opportunities across intermediate results of different computation tasks to further reduce the communication load. We propose a new scheme, named compressed coded distributed computing (in short, compressed CDC), which jointly exploits the above...