Sharif Digital Repository

The compound, alkaline lead acetate, Pb(CH3COO)2·PbO·H2O (ALA), was purchased from the Fluka Company. The X-ray diffraction film and SEM electron microgaph of this compound were obtained and reported in this paper for the first time. The thermal behavior of alkaline lead acetate (ALA) was studied using thermogravimetery (TGA) and Differential Scanning Calorimetery (DSC) techniques under an O2 gas atmosphere from 25 to 600°C. Four distinct energy changes associated with weight changes were observed, all of them being exothermic in the DSC results. The amount of ΔH for each peak is reported. © Sharif University of Technology  

The compound, lead hydroxide Pb6O4(OH)4, was prepared by a method used for the first time in the authors laboratory. The compound was identified by XRD and it's purity was determined by analytical methods (100%). The thermal characteristics of this compound were investigated by using a thermogravimetry (TGA). This compound was found to be stable at room temperature and at 160°C will decompose completely to produce lead (II) oxide. © Sharif University of Technology, April 2007  

During the recent decade, high induction diffusers have become more appealing in applications which require relatively high ventilation airflow rates, such as clean rooms. In this research, the effect of geometric parameters on the performance of a specific type of swirling air diffuser is investigated numerically. The results show that although the diffuser slots geometry, namely their angle and aspect ratio, is impressive on the diffuser performance, it is not as important as the swirling blade angle and the performance is almost constant in a wide range of slots specifications. The results also demonstrate that the diffuser performance and the resultant indoor airflow distribution highly... 

Surgical site infection (SSI) is one of the important infectious problems in hospitals. It is well known that appropriate ventilation strategy is most effective way to control bacteria-carrying airborne particles responsible for SSI. With considerable improvement in the computational capacity of computers, computational fluid dynamics (CFD) technique has been widely used to study the indoor airflow and contaminant dispersion over the enclosures. In this research, the effect of inlet air velocity on the ultra-clean ventilation system performance is investigated Eulerian-Lagrangian numerical approach. The results show that surgical wound contamination may be highly affected by inlet velocity.... 

Increasing concerns about global warming and environmental pollution control has pushed the relevant organizations to set regulations and to develop programs for energy saving. In addition, for many high energy using appliances, energy labeling provides the end user with important data to select energy-efficient equipments and encourage the manufacturers to enhance the performance of their productions. In this research, a new energy-saving program for wet cooling towers has been developed. Considering a thermo-hydraulic analysis, a novel Energy Index (IE) has been extracted which takes all aspects of the problem into account. The present index can be used as a proper criterion for energy... 

The primary source of surgical site infection is the deposition of flakes released from the exposed skin of surgical staff or the patient on the exposed surgical wound. In this study, a computational model for simulating air ow and thermal conditions in an operating room is developed, and transport and deposition of particulate contaminants near the wound are analyzed. The results show the formation of a thermal plume over the wound tissue, which is typically at a higher temperature than the surrounding. The thermal plume protects the wound from the deposition of contaminants. In addition, the computational model predicts an optimum value for the inlet air velocity that is mainly maintaining... 

The present study aimed to improve the survivability of L. acidophilus encapsulated in alginate-whey protein isolate (AL-WPI) biocomposite under simulated gastric juice (SGJ) and simulated intestinal juice (SIJ). Microcapsules were prepared based on emulsification/internal gelation technique. Optimal compositions of AL and WPI and their ratio in the aqueous phase were evaluated based on minimizing mean diameter (MD) of the microcapsules and maximizing encapsulation efficiency (EE), survivability of cells under SGJ (Viability), and release of viable cells under SIJ (Release) using Box-Behnken experimental design. Optimal composition comprising 4.54% (w/v) AL, 10% (w/v) WPI, and 10% (v/v)... 

Despite complex fluctuations, missing data, and maintenance costs of detectors, traffic volume forecasting at intersections is still a challenge. Moreover, most existing forecasting methods consider an isolated intersection instead of multiple adjacent ones. By accurately forecasting the volume of short-term traffic, a low-cost method can be provided to solve the problems of congestion, delay, and breakdown of detectors in the road transport system. This paper outlines a novel hybrid method based on deep learning to estimate short-term traffic volume at three adjacent intersections. The gated recurrent unit (GRU) and long short-term memory (LSTM) bilayer network with wavelet transform (WL)... 

Polysaccharides (PSA) have taken specific position among biomaterials for advanced applications in medicine. Nevertheless, poor mechanical properties are known as the main drawback of PSA, which highlights the need for PSA modification. Nanocomposites PSA (NPSA) are a class of biomaterials widely used as biomedical platforms, but despite their importance and worldwide use, they have not been reviewed. Herein, we critically reviewed the application of NPSA by categorizing them into generic and advanced application realms. First, the application of NPSA as drug and gene delivery systems, along with their role in the field as an antibacterial platform and hemostasis agent is discussed. Then,... 

Higher than a standard level, the humidity provides a suitable environment for the pathogenic microorganisms to grow and increases energy consumption for cooling, increasing greenhouse gas emissions. Desiccant air-conditioning (DAC) is an effective method to reduce humidity and energy simultaneously. Conventional desiccants are not suitable for use as a desiccant in building air conditioners, mainly because of high regeneration temperature and other issues such as limited equilibrium capacity and hydrothermal and cyclic instability. Metal-organic frameworks (MOFs) are a novel class of porous crystalline materials without the disadvantages of traditional desiccants. They benefit from a huge... 

Introduction: Carbon nanotubes (CNTs) have been widely employed as biomolecule carriers, but there is a need for further functionalization to broaden their therapeutic application in aqueous environments. A few reports have unraveled biomolecule–CNT interactions as a measure of response of the nanocarrier to drug-encapsulation dynamics. Methods: Herein, the dynamics of encapsulation of the antimicrobial peptide HA-FD-13 (accession code 2L24) into CNTs and hydroxylated CNTs (HCNTs) is discussed. Results: The van der Waals (vdW) interaction energy of CNT–peptide and HCNT–peptide complexes decreased, reaching −110.6 and −176.8 kcal.Mol−1, respectively, once encapsulation of the peptide inside... 

Herbal medicine wastes (HMWs) are byproducts of medicine factories, which are mainly landfilled for their environmental problems. Only bearing in mind the contamination and concerns caused by the COVID-19 pandemic and environmental emissions, the worth of herbal medicine wastes management and conversion to green products can be understood. In this work, subcritical water treatment was carried out batch-wise in a stainless tube reactor in the pressure range of 0.792–30.0 MPa, varying the temperature (127–327 °C) and time (1–60 min) of extraction. This resulted in new and green material sources, including organic acids, amino acids, and sugars. Amazingly, at very low extraction times (below 5... 

Lumped method (Electrical analogy) is a quick and easy way to model human cardiovascular system. In this paper Lumped method is used for simulating a complete model. It describes a 36-vessel model and cardiac system of human body with details that could show hydrodynamic parameters of cardiovascular system. Also this paper includes modeling of pulmonary, atrium, left and right ventricles with their equivalent circuits. Exact modeling of right and left ventricles pressure with division of ascending aorta into 27 segments increases the accuracy of our simulation. In this paper we show that a calculated pressure for aorta from our complex circuit is near to measured pressure by using advanced... 

One of the most arduous challenges in tissue engineering is neovascularization, without which there is a lack of nutrients delivered to a target tissue. Angiogenesis should be completed at an optimal density and within an appropriate period of time to prevent cell necrosis. Failure to meet this challenge brings about poor functionality for the tissue in comparison with the native tissue, extensively reducing cell viability. Prior studies devoted to angiogenesis have provided researchers with some biomaterial scaffolds and cell choices for angiogenesis. For example, while most current angiogenesis approaches require a variety of stimulatory factors ranging from biomechanical to biomolecular... 

The purpose of this study is to determine the influence of nano-alumina particles on the self-flow characteristics of aluminaspinel self-flowing castables. for this reason, the self-flow characteristics such as; self-flow value and working time of the alumina-spinel castables with different amount of nano-alumina particles have been studied. Also, the mechanical properties and microstructure of these castables have been studied. for the study of nano-alumina (d50 =4 3 nm) addition on selfflow characteristics and other properties of these castables, reactive alumina is substituted by nano-alumina powder in 0-4 wt.% range. The results show that the nano-alumina particles have great effect on... 

LDL concentration is believed to be responsible for plaque formation that leads to atherosclerotic cardiovascular disease. We conducted this study to investigate the effects of hematocrits and LDL diameters on LDL concentration on the wall of an abdominal aortic aneurysm (AAA). The blood flow was considered to be a pulsatile and non-Newtonian flow whose viscosity was a function of hematocrits and strain rate. Lumen, Brownian, and thermophoresis diffusions were analyzed in LDL concentration. The results demonstrated that adding thermophoresis diffusion increases LDL concentration. Moreover, among three types of LDLs, including small LDLs, intermediate LDLs, and large LDLs, small LDLs were the... 

LDL concentration is believed to be responsible for plaque formation that leads to atherosclerotic cardiovascular disease. We conducted this study to investigate the effects of hematocrits and LDL diameters on LDL concentration on the wall of an abdominal aortic aneurysm (AAA). The blood flow was considered to be a pulsatile and non-Newtonian flow whose viscosity was a function of hematocrits and strain rate. Lumen, Brownian, and thermophoresis diffusions were analyzed in LDL concentration. The results demonstrated that adding thermophoresis diffusion increases LDL concentration. Moreover, among three types of LDLs, including small LDLs, intermediate LDLs, and large LDLs, small LDLs were the...