Sharif Digital Repository

Nanostructured and mesoporous TiO2-Ta2O5 films and powders with various TiO2:Ta2O5 molar ratios and high specific surface area (SSA) have been prepared by a straightforward particulate sol-gel route. Titanium isopropoxide and tantalum ethoxide were used as precursors and hydroxypropyl cellulose (HPC) was used as a polymeric fugitive agent (PFA) in order to increase the SSA. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that powders contained both hexagonal δ-Ta2O5 and monoclinic β-Ta2O5 phases, as well as anatase and rutile. It was observed that Ta2O5 retarded anatase-to-rutile transformation. Furthermore, δ → β phase transformation temperature increased... 

The original article contained a mistake in Equation 1. The corrected Equation 1 is shown below: MX+Cx+Kx=f.The original article has been updated © Springer Nature B.V. 2022  

For the present article, a pulsating heat pipe (PHP) is fabricated and tested experimentally by bending a copper tube. The effects of working fluid, heat input, charging ratio, inclination angle, magnets location, and ferrofluid (magnetic nanofluid) volumetric concentration have been investigated on the thermal performance of this PHP. Experimental results show that using ferrofluid as a working fluid improves the thermal performance of the PHP significantly. Moreover, applying a magnetic field on a ferrofluidic PHP reduces its thermal resistance. By changing the inclination angle of the PHP from vertical mode to angles close to the horizontal mode, the present PHP has a constant and... 

Nanostructured TiO2-Al2O3 films and powders were prepared by a straightforward aqueous particulate sol-gel route. Titanium (IV) isopropoxide and aluminum chloride were used as precursors, and hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the porosity. The effect of Al:Ti molar ratio was studied on the crystallization behavior of the products. X-ray diffraction (XRD) revealed that the powders crystallized at 800°C, containing anatase-TiO2, rutile-TiO2 and cubic-Al2O3 phases. Furthermore, it was found that Al2O3 retarded the anatase to rutile transformation. Transmission electron microscope (TEM) image showed that one of the smallest crystallite sizes was... 

Analyzing the features of the chromosomes can be very useful for diagnosis of many genetic disorders or prediction of the possible abnormalities that may occur in the future generations. For this purpose, karyotype is often used which to make it, there is necessary to identify each one of the 24 chromosomes from the microscopic images. Definition and extraction of the morphological and band pattern based features for each chromosome is the first step to identify them. An important class of the morphological features is the location of the chromosome's centromere. Thus, centromere localization is an initial step in designing an automatic karyotyping system. In this paper, a novel algorithm... 

This study presents optimal placement of Phasor Measurement Units (PMUs) for the purpose of power system observability using topology based formulated algorithms. The optimal PMU placement problem is formulated to minimize the number of PMUs installation subject to full network observability. The Branch and Bound (B and B) and genetic algorithm optimization methods are selected to solve the problem, which are suitable for problems with integer and Boolean variables. Topology-based algorithm used for observability analysis and a hybrid method of topology transformation and nonlinear constraint is used to form constraints. The IEEE 14, 30, 57 and 118-bus and the New England 39-bus test systems... 

In this paper, the truly Meshless Local Petrov-Galerkin (MLPG) method is extended for computation of steady incompressible flows, governed by the Navier-Stokes equations (NSE), in vorticity-stream function formulation. The present method is a truly meshless method based on only a number of randomly located nodes. The formulation is based on two equations including stream function Poisson equation and vorticity advection-dispersion-reaction equation (ADRE). The meshless method is based on a local weighted residual method with the Heaviside step function and quartic spline as the test functions respectively over a local subdomain. Radial basis functions (RBF) interpolation is employed in shape... 

An analytic expression for energy and angular dependence of a secondary charged lepton in the decay of a polarized top quark with anomalous tWb couplings in the presence of all anomalous couplings are derived. The angular distribution of the b-quark is derived as well. It is presented that the charged lepton spin correlation coefficient is not very sensitive to the anomalous couplings. However, the b-quark spin correlation coefficient is sensitive to anomalous couplings and could be used as a powerful tool in the search for non-SM coupling. © 2007 IOP Publishing Ltd  

In this paper we study the noncommutative effects to the lepton spectrum from the decay of a polarized top quark. It is shown that the lowest contribution comes from the quadratic terms of the noncommutative parameter. The deviations from the standard model are significant for small values of the noncommutative characteristic scale. However, the charged lepton spin correlation coefficient has a remarkable deviation from the standard model from very low values of the noncommutative characteristic scale to 1 TeV. © 2006 The American Physical Society  

In this paper, the truly Meshless Local Petrov-Galerkin (MLPG) method is extended for computation of unsteady incompressible flows, governed by the Navier-Stokes equations (NSE), in vorticity-stream function formulation. The present method is a truly meshless method based only on a number of randomly located nodes. The formulation is based on two equations including stream function Poisson equation and vorticity advection-dispersion-reaction eq. (ADRE). The meshless method is based on a local weighted residual method with the Heaviside step function and quartic spline as the test functions respectively over a local subdomain. Moving Least Square approximation (MLS) is employed in shape... 

In this paper fabrication of a 0-3 ceramic/ceramic composite lead zirconate titanate, Pb(Zr0.52Ti0.48)O3 thin film has been presented and then a pressure sensor based on multilayer thin-film PZT diaphragm contain of Lead Zirconate Titanate nanocrystalline powders was designed, modeled and optimized. This multilayer diaphragm in general acts as sensor or actuator. ANSYS was used for simulation of diaphragm. Dynamics characteristics of this multilayer diaphragm have been investigated. By this simulation the effective parameters of the multilayer PZT diaphragm for improving the performance of a pressure sensor in different ranges of pressure are optimized. The optimized thickness ratio of PZT... 

The aim of this study was to investigate the applicability of acoustic emission (AE) technique to evaluate delamination crack in glass/epoxy composite laminates under quasi-static and fatigue loading. To this aim, double cantilever beam specimens were subjected to mode I quasi-static and fatigue loading conditions and the generated AE signals were recorded during the tests. By analyzing the mechanical and AE results, an analytical correlation between the AE energy with the released strain energy and the crack growth was established. It was found that there is a 3rd degree polynomial correlation between the crack growth and the cumulative AE energy. Using this correlation the delamination... 

The universal paradigm shift towards green energy has accelerated the development of modern algorithms and technologies, among them converters such as Z-Source Inverters (ZSI) are playing an important role. ZSIs are single-stage inverters which are capable of performing both buck and boost operations through an impedance network that enables the shoot-through state. Despite all advantages, these inverters are associated with the non-minimum phase feature imposing heavy restrictions on their closed-loop response. Moreover, uncertainties such as parameter perturbation, unmodeled dynamics, and load disturbances may degrade their performance or even lead to instability, especially when...