Sharif Digital Repository

With the increasing development of Internet of Things (IoT) devices, issues such as establishing effective communication, optimizing energy consumption, ensuring reliability and improving the quality of services provided by these devices become more and more complex and critical challenges. With the introduction of fog computing model by Cisco in 2012, some of these challenges were successfully managed. Fog computing is a distributed computing paradigm that acts as a middle layer between cloud data centers and IoT-based devices/sensors. By distributing computing resources closer to edge devices, fog computing enables real-time data processing and analysis. However, one of the key aspects in... 

Memristor is a modern circuit element that demonstrates resistance memory function and can have important applications in emerging memories and artificial synapses. Binary oxides and perovskite oxides are two major classes of materials that are promising for memory resistances. Among the binary oxides, TiO2, and among the perovskite oxides, SrTiO3 (STO), are particularly promising in research on electrical resistance switching. In this thesis, by using two deposition techniques of sputtering and pulsed laser deposition (PLD), we have constructed single-layer and multi-layer memristor devices based on these two materials. Two general mechanisms control the behavior of memristors: bulk-control... 

The process of aging is accompanied by problems that can affect the daily activities of an elderly. Recent studies have shown that the use of virtual reality technology provides a variety of diagnostic methods and clinical systems to prevent and delay cognitive aging to ensure the normal life of the elderly. In this project, efforts have been made to design some virtual reality-based games focusing on memory and recall in the form of three scenarios of finding address, finding car, and virtual-reality based maze game for the elderly to prevent cognitive decline and developing the dementia so that the difficulty of the game level ahead of each elderly can be adjusted according to his or her... 

In this study, biosorption of selenium by Pseudomonas putida bacteria was investigated in both single and binary uptake systems. Bacteria cells were immobilized in the chitosan beads, to study impact of microorganism entrapment on the sorption capacity of the fabricated adsorbent. Uptake capacity increased by the entrapped bacterial weight percent up to 20 wt. %; but thereafter, sorption capacity gradually leveled off with an increase in the loading percentage of the bacterial cells.The effects of the three process variables including pH (2-6), biomass dosage (0.5-2.5 g/L) and initial concentration of selenium (50-250 mg/L) on the uptake performance of adsorbent were investigated, and... 

In this thesis, we study the observability and stability problems of networked control systems (the control systems which communicate through communication channels) to answer two important questions about different system models. The first is that what is the constraints implied by the stability or observability of systems? (necessary condition on the observability and stability). The second is that under which constraints can we present a design for system to guarantee the observability or stability of systems? (sufficient condition on the observability and stability). Clearly, an efficient design is the one that presents a tight sufficient condition.One of system models addressed in this... 

With the advent of the Industry 4.0 and advances in Information Technology, the manufacturing systems have experienced great evolution and transition in their production paradigms. Among these developments, we can refer to the globalization process of resources and a diversion from mass production to the production that is based on customized orders. Likewise, a movement from product-based manufacturing towards service-based production is taking place. Such changes expose supply networks to new opportunities and threats and encourage them to exploit advanced production systems. Cloud manufacturing, as an approach to fulfill the state-of-the-art opportunities, has been recently considered by... 

Emotions are one of the most important issues which affects daily life and activities. On the other hand, robots play an increasing role in human life and play a fundamental role in meeting our needs. One of these basic roles is empathy and verbal interaction between the robot and human. In this research, participant's emotions were stimulated in two ways: by using OASIS and GAPED image data sets and by instructing the participants to remind about their good or bad memories. During emotional stimulation, EEG signals have been recorded for the training and testing process. The preprocessing of training data includes filtering, removing bad parts of data, removing bad channels and... 

This thesis is divided into three parts: In part I, interactions of neutral and anionic forms of histidine with coinage metal nano clusters M3 (M = Au, Ag and Cu) are investigated. Results demonstrate that nonconventional M…H-O hydrogen bonds and M-X bonds (X = N, O) play stabilization roles in interactions of histidine and metal nano clusters. Presence of negative charge in ligand leads to increase of binding energy of complexes. In the next step, the effects of coinage metal nano clusters on the gas-phase acidity of weak organic acid (histidine) have been explored. The acidity of isolated histidine is compared with the acidity of its Au3–, Ag3– and Cu3–complexed species. Moreover, pKa... 

The purpose of this thesis is to find upper bounds for the eigenvalues of natural operators acting on functions on a compact Riemannian man-ifold (M, g) such as the Laplace–Beltrami operator and Laplace-type operators. In the case of the Laplace–Beltrami operator, two aspects are investigated:
The first aspect is to study relationships between the intrinsic geometry and eigenvalues of the Laplace–Beltrami operator. In this regard, we obtain upper bounds depending only on the dimension and a conformal invariant called min-conformal volume. Asymptotically, these bounds are consistent with the Weyl law. They improve previous results by Korevaar and Yang and Yau. The proof relies on the... 

In recent years, a strong interplay between quantum mechanics and the physics of waveguide arrays was established based on a formal analogy between atomic and photonic lattices. The study of light evolution in photonic lattices has provided deep insights into the physics of wave function dynamics and, hence, peculiar quantum mechanical features. Arrays of evanescently coupled waveguides is a very versatile model system for discrete physics. Anderson localization and Bloch oscillations are two examples of coherent quantum transport phenomena, which have been investigated in this thesis. In the first part of this thesis, we investigate numerically the effect of long-range interaction on the... 

Behavioral economics demonstrates that the sentiment can affect the behaviors and financial decisions of people. Can this be generalized to societies? For instance, is it possible for societies to experience emotions that will change their ways of decision making? This thesis attempts to perform an experiment addressing these questions. Bitcoin has been facing a transient phase of price volatilities. Many articles believe that bitcoin does not have an inherent value and is only derived by factors like the perception and acceptance of it and the sentiments among the investors. Digital currencies provide the unique possibility of measuring socioeconomic signals using digital traces.The... 

Organizations in the oil and gas industry often deal with a variety of logistic challenges. These organizations need to utilize innovative technologies like machine learning and other IT-based technologies to reduce costs and help achieve a lower-emissions environment. These industries involve a global supply chain comprised of domestic and international transportation, inventory control, materials handling, import/export facilitation, and information technology. Currently, in these industries, a classic model for executing supply-chain management techniques is considered. However, companies can optimize their supply chains to generate more productivity for better financial returns. Applying... 

The main purpose of this research is to select a suitable solution for regeneration of ion exchange resins of TR system of Bushehr nuclear power plant and also to compare and evaluate the possibility of using industrial cationic resin (Amberlite IR120) instead of nuclear grade cationic resin (Amberlite IRN97).First, different solutions for regeneration of cationic resins were investigated. For this purpose, three strong acids including hydrochloric acid (HCl), sulfuric acid (H2SO4) and nitric acid (HNO3) were selected and each of these acids was tested in two different concentrations and two different linear velocities; Also, to evaluate the appropriate solution for anionic resin... 

In the traditional process planning, the expert decides upon the production process for a product by considering the previous cases and by decomposing, analysis and interpreting the shape of the product in terms of more familiar previous cases. In recent decades and by developments in the disciplines of the artificial intelligence, mass customization, cloud manufacturing and additive manufacturing, a necessity for process planning systems which need less human intervention by intelligent interpretation of the shape and consideration of the available data from previous productions, has emerged. Inspired by the traditional process planning by human expert, and considering the overall process... 

In this research, we focused on demonstration of features and advantages of supercritical fluids technology to formation of fine particles (nano and micro scales) from bulk materials (solid) and synthesized metal oxides nanoparticles. Therefore, using two different fluids, carbon dioxide and water, and two completely different methods, the Rapid expansion of supercritical solution and supercritical hydrothermal, were used to produce fine particles of drug (acetaminophen) and nano metal oxide (zirconium dioxide and bismuth ferrite). The summary of this research are as follows:1. The solubility of acetaminophen in SuperCritical-Carbon Dioxide (SC-CO2) with and without menthol as a cosolvent... 

This thesis is divided into three parts: In part I, conformational properties of neutral, anionic, cationic and zwitterionic forms of glutathione tripeptide were investigated by means of DFT-B3LYP method with 6-31+G (d,p) basis set. Results show that glutathione is a very flexible molecule and its conformational energy landscape is strongly influenced by forming intramolecular hydrogen bond and its charge. Conformation of each amino acid in glutathione tripeptide depends on its orientation within the peptide sequence in addition to the conformation of other amino acids within the chain. Investigation of intramolecular hydrogen bonds in these conformers by means of AIM analysis demonstrates... 

3D bioprinting technology is a promising approach for corneal stromal tissue regeneration. At first, two different concentrations of GelMA macromer (7.5% and 12.5%) were tested for corneal stroma bioprinting. Due to high macromer concentrations, 12.5% GelMA was stiffer than 7.5% GelMA, which made it easier to handle. In terms of water content and optical transmittance of the bioprinted scaffolds, we observed that scaffold with 12.5% GelMA concentration was closer to the native corneal stroma tissue. Subsequently, cell proliferation, gene and protein expression of human corneal stromal cells encapsulated in the bioprinted scaffolds were investigated. Cytocompatibility in 12.5% GelMA scaffolds...