Sharif Digital Repository

Within the elasticity formulation the most general displacement field for hygrothermal problems of long laminated composite plates is presented. The equivalent single-layer theories are then employed to determine the global deformation parameters appearing in the displacement fields of general cross-ply, symmetric, and antisymmetric angle-ply laminates under thermal and hygroscopic loadings. Reddy's layerwise theory is subsequently used to determine the local deformation parameters of various displacement fields. An elasticity solution is also developed in order to validate the efficiency and accuracy of the layerwise theory in predicting the interlaminar normal and shear stress... 

During transient tests, both pressure and temperature are changed depending on downhole flow rate. In gas producing wells, Joule-Thomson cooling and frictional heating effects are the main dynamic factors causing flowing bottomhole temperature to differ from the static formation temperature at that depth. When a gas well is shut in, JT cooling effect is vanished and this causes a sharp increase in sandface temperature. As effect of wellbore storage ends, wellbore temperature gradually cools down due to heat conduction with near wellbore region. This paper demonstrates a new technique for using temperature transient data in gas wells in order to determine end of wellbore storage. Also, effect... 

In an attempt to explore the significance of transport theory in neutron noise, localization of a noise source by Green's function based on transport theory is investigated. There are considerable differences between Green's functions based on diffusion and transport, such as small dimensions, near edges, high heterogeneity medium and high-frequency source of perturbation. These differences are expected to significantly impact unfolding, reconstruction, and identification of the neutron noise source. Improvement in noise source unfolding methods is essential in terms of safety aspects and reactor performance enhancement. Since gaining the ability to monitor nuclear reactor based on noise... 

Interpretation of temperature logs has been done successfully in wells to identify water or gas entries location, detect casing leaks, and evaluate cement placement. This paper shows how knowledge of the Joule-Thomson cooling effect and frictional heating effect can be applied for well test interpretation. Many analysts rely on pressure derivative curve to diagnose wellbore storage period and radial flow regime on pressure transient data. However, there are field examples that flow regimes can't be accurately determined. During transient tests, both pressure and temperature are changed depending on downhole flow rate. In gas producing wells, Joule-Thomson cooling and frictional heating... 

Nowadays, the significance of sustainability has urged composite manufacturers to replace traditional synthetic fibers with eco-friendly natural alternatives due to their environmental and economic benefits. This work aims to fabricate hybrid polypropylene (PP) composites with short flax fibers, octene-ethylene copolymer (POE) rubber particles, and maleic anhydride-grafted polypropylene (MAPP) compatibilizer. The main goal is to gain an insight into the combined effect of toughening mechanisms induced by the short fibers and rubber particles at the crack tip and wake of composites, which is a crucial step in reaching a balance between toughness and rigidity. In this regard, a novel... 

Inserting the distal locking screws is a challenging step of the intramedullary nailing procedures due to the nail deformation that makes the proximally mounted targeting systems ineffective. A pre-planning methodology is proposed, based on an analytical model of the nail–bone construct, to predict the nail deformation during surgery using orthogonal preoperative radiographs. Each of the femoral shaft and the nail was modeled as a curved tubular Euler–Bernoulli beam. The unknown positions and forces of the nail–bone interaction were found using a systematic trial and error approach, which minimized the total strain energy of the system while satisfying the force and geometrical constraints.... 

In the selective laser sintering (SLS) method, layers of powder are scanned by a laser beam and sintered. The thermal gradients created by laser heating and the subsequent cooling of the sintered sections results in thermal stresses and part warping in the final part. Thermal gradients are dependent on the scanning algorithm, in particular, the scan vector length. In this work, an efficient scanning algorithm for the SLS process is presented with the aim to minimise the part warping in the final part due to thermally induced residual stresses, while maintaining the production time at a minimum. The proposed algorithm is implemented in a finite element simulation and scanning parameters... 

E-business requires interoperability of information systems and, therefore, standardization of information sharing. Several XML-based e-business frameworks are developed to define standards for information sharing within and between companies. These frameworks only standardize structure of messages and aren't able to define semantics. The use of Semantic Web Service (SWS) technologies has been suggested to enable more dynamic B2B integration of heterogeneous systems and partners. We present a semantic B2B mediator based on the WSMX -a SWS execution environment, to tackle heterogeneities in RosettaNet messages. We develop a rich RosettaNet ontology and use the axiomatized knowledge and rules... 

A series of biodegradable acrylic terminated polyurethanes (APUs) based on poly(ε-caprolactone) diol (PCL), aliphatic 1,6-hexamethylene diisocyanate (HDI) and hydroxyethyl methyl acrylate (HEMA) was synthesized as potential materials for hard tissue biomedical applications. PCLs with low molecular weights of 1000 and 2000 g/mol were employed to provide different amounts of end capped urethane acrylate in APUs. To control crosslink density, a mixture of two different reactive diluents including mono-functional HEMA and bi-functional ethylene glycol dimethacrylate (EGDMA) with different weight ratios was incorporated into the APUs, called here PUAs. Morphological characteristics and mechanical... 

Lifetime is the mos important concern in Wireless Sensor Networks (WSNs) due to limited battery power of sensor nodes. Moreover, a WSN should be capable of timely fulfilling its mission without losing important information in event-critical applications. In this paper, we focus on designing an energy-efficient and energy-aware real-time routing algorithm aiming to explore the long lifetime routing schemes in which delay constraint is satisfied in the presence of lossy communication links. To achieve this goal, our energy-aware forwarding protocol utilizes an optimum distance real-time routing algorithm to minimize energy consumption in unreliable WSNs. Simulation results reveal that the... 

Data aggregation is an effective technique which is introduced to save energy by reducing packet transmissions in WSNs. However, it extends the delay at the intermediate nodes, so it can complicate the handling of delayconstrained data in event-critical applications. Besides, the structure-based aggregation as the dominant data gathering approach in WSNs suffers from high maintenance overhead in dynamic scenarios for event-based applications. In this paper, to make aggregation more efficient, we design a novel structure-free Real-time Data AGgregation protocol, RDAG, using a Real-time Data-aware Routing policy and a Judiciously Waiting policy for spatial and temporal convergence of packets.... 

In this paper, a multi-product economic production quantity problem with limited warehouse-space is considered in which the orders are delivered discretely in the form of multiple pallets and the shortages are completely backlogged. We show that the model of the problem is a constrained non-linear integer program and propose a genetic algorithm to solve it. Moreover, design of experiments is employed to calibrate the parameters of the algorithm for different problem sizes. At the end, a numerical example is presented to demonstrate the application of the proposed methodology  

A huge amount of web services are deployed on the Web, nowadays. These services can be used to fulfill online requests. Requests are getting more and more complicated over time. So, there exists a lot of frequent request that cannot be fulfilled using just one web service. For using web services, composing individual services to create the added-value composite web service to fulfill the user request is necessary in most cases. Web services can be composed manually but it is a too tedious and time consuming task. The ability of automatic web service composition to create a new composite web service is one of the key enabling features for the future for the semantic web. There are some... 

In this article, a three-dimensional numerical simulation is performed to investigate the effect of magnetic field on the heat transfer of ferrofluid inside a tube which is equipped with twisted tape. This work comprehensively focused on the flow feature and temperature distribution of ferrofluid in presence of non-uniform magnetic field while ferrofluid swirled inside a tube with twisted tape. In this study, it is assumed that the ferrofluid is single phase and laminar and constant heat flux is applied on the outside of the tube. The magnetic field is established by wire in parallel direction with the axis of the tube. The base fluid is water with 0.86 Vol% Nano particles (Fe3O4). The... 

The mixed convection of a three-dimensional square duct with various arrangements of fins in both laminar and turbulent flow is numerically characterized and studied. This study focuses on the ability of fin arrangements to enhance a heat transfer while flow is incompressible and the fluid is air. In our models, the lower duct wall is defined with a constant heat flux condition while the two side walls and upper wall are insulated. The finite volume method with the SIMPLE (Semi Implicit Method for Pressure Linked Equations) algorithm is used for handling the pressure–velocity coupling. The numerical results are validated with experimental data and show good agreement. The computations... 

Purification of extracellular α-amylase from Bacillus subtilis was carried out via fractional precipitation by acetone and ion exchange chromatography. These steps provide fast precipitation as well as purification of α-amylase to improve enzyme purity, activity and stability. Compared with two-phase methods in which the yield was less than 1, this method resulted in a yield of more than 3. Moreover, 95% of acetone was recovered that enhanced the economy of the downstream process. Using the data provided by 2D electrophoresis, purification was done by a single step ion exchange chromatography. The enzyme exhibited a molecular mass (SDS-PAGE) of 50KD and the pI of 5. Maximum “yield” and... 

Several e-business frameworks are developed to define standards for information sharing within and between companies. These frameworks only standardize structure of messages and aren't able to define semantics. It leads to slow and costly dynamic Business-to-Business (B2B) integration. The use of Semantic Web Senice (SWS) technologies has been suggested to enable more dynamic B2B integration of heterogeneous systems and partners. We present a semantic B2B mediator based on the WSMX -a SWS execution environment, to tackle heterogeneities in B2B services. We particularly show how WSMX can be made to support the RosettaNet e-business framework and how it can add dynamics to B2B interactions by...