Sharif Digital Repository

Concrete structures require reinforcement and retrofitting because of possible mistakes in design or calculation, inconformity between plan and implementation, change in occupancy or applied loads, and decay. Development in technology, production of materials, and new methods play important roles in development of structure construction and reinforcement methods. Emerge of new materials creates great demand in studying, surveying, and determining design characteristic and criteria for these materials. One of these materials is FRP composite which is used in concrete structure reinforcement in different ways. In this laboratory research, the effect of external wrapping by GFRP composite... 

In this research , we consider a two-echelon system including one supplier , one vendor and some buyers. Every buyer has a distinct and uniform demand . The policy for ordering is (r,q) and shortage is not permitted. Buyers have no dependence on each other and every buyer orders it's demand from the vendor by itself . Hence, the vendor will be faced with discrete and different demands. Considering these assumptions, we use vendor management inventory and determine the order quantities for buyers and vendor in order to minimize the total cost of system  

A basic technique in data reduction is to approximate a collection of data by another collection of smaller size. Then, the resulted data are easier to be processed or maintained. An example of such large scale data is the ordered sequence of n points describing a path or a region boundary. We are given a sequence of points p , p , ..., p , and we consider the 1 2 n problem of approximating these points by a path with k < n line segments which error of this path is not greater than special value. Various criterions are defined to compute the path simplification error.This problem can be used in GIS, Image Processing and Computer Graphics problems. In this thesis, we consider special case... 

One the most important issues in most of embedded systems is reliability and fault tolerance.Ensure of correct operation and evaluate reliability and fault tolerance of embedded proces-sors as a critical part of embedded systems, would be necessary. Fault injection is one themostly used methods for evaluating those features. Using FPGA devices is a good alterna-tive for time consuming simulation-based fault injection method because of their speed. But,there are some critical issues in FPGA-based fault injection methods which are controllabil-ity and observability. In addition to need for efficient and applicable observation and controlmechanism to handle fault injection experiments, a... 

Behran Mehr Peyma (BMP) is an elevator equipment producer and trader in Iran which was established in 2004. At first they are producing some regular parts of elevator and then during these years they are trying to improve their work and expand their business till they have the 15% market share in elevator market in Tehran.In this thesis I am trying to use the SWOT and PETS methods to show the exact situation of BMP comparing to the whole market considering the competitors.During this reduction in the market I suggest to BMP to change some policies and use some of its strength to attract some new customers, changing their brand name and find a relation to contribute in some tenders and... 

Adiabatic logic families are a group of logic circuits which operate based on adiabatic principles to tremendously reduce power consumption. These families have basic difference with common logic families in transistor level structure and there signals are not quadrangular but trapezoidal. Also, in these systems the source lines and clock pulse are the same. Research on Adiabatic families needs theoretical information in reversible computing. So we will start this project with explaining fundamental information in this field. After that some of these logic families are introduced and three important and widely used of them (SCRL-RERL-2LAL) are chosen to simulate. In each of these families... 

Hodge theory is a beautiful synthesis of geometry, topology, and anal- ysis, which has been developed in the setting of Riemannian manifolds. On the other hand, spaces of images, which are important in the math- ematical foundations of vision and pattern recognition, do not fit this framework. This motivates us to develop a version of Hodge theory on metric spaces with a probability measure. We believe that this constitutes a step towards understanding the geometry of vision. We extend the theory of the Laplacian on domains of Euclidean space or on a manifold and next to metric space. Finally we give a beautiful application in web researcher engin.
 

Optomechanical systems have attracted considerable attention in the last decade. Such a raising prominence is mainly due to its capability in providing new insight into the quantum behavior of macroscopic objects and exploring the interface between quantum and classical mechanics. Alongside this fundamental quest, cavity optomechanics has many other benefits, ranging from very precise measurements on forces and positions to quantum information processing. In this thesis, we investigate quantum properties of such systems. Particularly, we study cooling of the mechanical resonator toward its ground state and the entanglement between this mechanical resonator and the cavity field. Cooling the... 

Performance of reinforced concrete frames is highly dependent on detailing of the joint connections between its members, such as beams and columns. To have a good structural behavior, joints must show ductile behavior and designed based on the philosophy of strong column-weak beam. In the case of sever lacking ductility, strength or even rigidity of the connections, or having a weak column-strong beam, in the existing structures, there is a need for seismic upgrading of the connection. There are several ways for seismic upgrading of this type of connections.In the last decade Fiber Reinforced Polymer (FRP) widely has been used to strengthening the reinforced concrete (RC) members. Most of... 

Moving data is becoming more and more important in different areas such as air traffic control, mobile communications, geographical information systems, GPS and other advanced technologies. In most cases, the path trajectory of such moving data is not known in advance. Moreover, they can change the direction and their speed of motion. Recently, a moving model, called black box model, has been proposed for such environments. In this model, there is a sequence of time stamps in which the position of each object is reported and the maximum displacement of each object in a time step is bounded by a known constant, dmax. In this thesis, we use this model to solve some computational... 

In tall buildings, seismic behavior depends on structural elements and their configuration. The usefulness of shear walls in the structural planning of multistory buildings has long been recognized. When walls are situated in advantageous positions in a building, they can be very efficient in resisting lateral loads originating from wind or earthquakes. Restriction in surrounding effects and the architectural design may contribute to have asymmetry in plan. In a number of papers, published mainly in the last decade, the analysis and design of shear walls has been studied. But just a few of them considered arrangement of shear walls to find the optimum layout. In the present study, analysis... 

In recent years use of concrete filled steel tube column structures has been increased due to their several advantages. In these columns the steel tube provides confinement for the concrete core of the column, so it increases axial strength and flexibility of the concrete core, and prevents spalling of the concrete. On the other hand the concrete core delays the local buckling steel tube and increases its bearing capacity. In addition, these columns have higher stiffness and strength than typical concrete columns due to placement of steel in farthest point of column cross section. The steel tube besides its structural role acts as framework for the concrete core and reduces time and cost of... 

In recent years, the use of fiber reinforced polymer (FRP) jackets, as an external lateral confinement has found considerable attention in retrofitting and strengthening existing reinforced concrete (RC) columns in earthquake prone areas. The FRP composites have numerous advantages such as ease in application, high strength and stiffness-weight ratio, no corrosion and negligible changes in the member dimension. Most of previous studies have concentrated on evaluation of the effect of confinement with spiral bars or FRP composites, separately. However, in practice both types of confinements exist in strengthening RC columns.
This paper presents the results of a computational modeling to... 

Embedded systems usually need to have a Real-time function so that the time constraint has been one of the most essential attributes of these systems. In the design phase of these systems a scheduler must be presented by the designer so that the observance of system deadlines can be guaranteed( Hard Real-time Systems). Safety-critical applications not only must guarantee system deadlines despite the hard timing constraints in the presence of error, but also must operate correctly and tolerate the error. In some of these applications reducing power consumption is one of the most important objectives because of limited supply energy. The purpose of this project is to firstly study the methods... 

In this study, I examined a two-level supply chain with two-way information exchange in which both the manufacturer and the retailer will be informed of each other’s stock.In order to make use of this type of information exchange, the manufacturer and the retaile modify their single-level base-stock policy to a two-level, state-dependent base-stock policy.Later, I exerted the lost sale policy. And finally, I investigated the impact of this type of information exchange on the general chain criteria. Then, I point out the advantages of this method.
Applying the mentioned method reduces the total cost of system as well as decreasing the average amount of manufacturer’s inventory along with... 

Nowadays competition in business world has increased drastically. Under these competitive circumstances, it is the supply chains that compete against each other rather than individual firms. Accordingly trying to achieve integrated and synchronized management of activities within a supply chain has become inevitable. Recently researchers have found interest in a particular problem in a supply chain and that is to minimize inventory and routing costs in a supply chain. This problem is known as Inventory Routing Problem (IRP) and has been intensely examined in past few years. In this thesis we will try to expand this well-known problem in pricing dimension. We call this new problem “Inventory... 

Embedded system Project management , because of lots of unstable parameters in design and also diversity of the technical knowledge ,requires a complex and agile project management methodology. Whereas in these projects , different knowledge fields are applied (such as electronics ,telecommunication ,control and robotics) and software is an evitable part of these systems ,project managers can not be familiar with all aspects of the technical and professional in deep manner. Considering that usually ,the project managers of such projects are elected from professionals of hardware or mechanical sections and not in deep inception of software project management , this thesis focus on a new model... 

In this research, we study the differences between the centralized and decentralized approaches in a two-stage serial supply chain including a manufacturer and a retailer under the lost sale policy. The centralized approach results in optimal solution of the system and the decentralized one is based on Stackelberg game in which the manufacturer is the leader. The retailer uses the continuous review (r, Q) policy and the demand arrives according to the stationary Poisson process. In order to obtain the solution for two approaches, a set of computational steps are developed. Furthermore, we provide a numerical example and the corresponding sensitivity analysis to compare the two approaches.... 

The dynamic behavior of beams and rectangular plates on elastic foundation under the effect of deterministic and random excitations is investigated in the cases of controlled and uncontrolled systems. The equations of motion are developed in each case in both deterministic and stochastic states. In all cases, the eigenfunction expansion method is used to solve the obtained equations.Moreover, the classical linear optimal control algorithm with displacement-velocity is considered to achieve the required control efforts. The applied dynamic excitations are supposed as moving loads, moving masses accompanied with random lateral excitations of supports and the uniform distributed linear loading... 

Queuing systems and their optimization have always been an important concern of every society. It has been a long time that people understand that with quantifying the queues they are standing on, they can save great amount of money and time. Because of that fact, they have been studying these systems, and reached to the interesting conclusions. These researches have shown that there exist a couple of equilibriums in every queuing system, such as: speed-price and speed-quality equilibriums.Knowing these equilibriums along with modeling them will help us optimize queues. The importance of this optimization is its incredible effect on cost reduction in economical and social queues. In many...