Sharif Digital Repository

In this paper, we study the problem of secret communication over a compound Multiple Access Channel (MAC). In this channel, we assume that one of the transmitted messages is confidential, which is only decoded by its corresponding receiver and kept secret from the other receiver. We call this proposed setting the compound MAC with a confidential message. For this model, we derive general inner and outer bounds for both imperfect and perfect secrecy conditions for the second receiver. Also, as examples, we investigate less noisy and Gaussian versions of this channel, and extend the results of the discrete memoryless version to these cases. Moreover, providing numerical examples for the... 

This paper discusses a technical comparison of a directexpansion ground-source heat pump (DX-GSHP) and an airsource heat pump (ASHP). To lower the ground heat exchanger size for cost reduction purposes, the system performance of a hybrid system is also evaluated using a supplementary air evaporator combined with the DX-GSHP. Detailed screening models previously developed for ASHPs and DX-GHSPs are first used to compare the seasonal performance of these two options for a residential building in the cold-climate city of Montreal, Canada. Then, the model is adopted for performance evaluation of the hybrid system. Additionally, different parameters including borehole total length and heat pump... 

The authors study the problem of secret communication over a multiple-access channel with a common message. Here, the authors assume that two transmitters have confidential messages, which must be kept secret from the wiretapper (the second receiver), and both of them have access to a common message which can be decoded by the two receivers. The authors call this setting as multiple-access wiretap channel with common message (MAWC-CM). For this setting, the authors derive general inner and outer bounds on the secrecy capacity region for the discrete memoryless case and show that these bounds meet each other for a special case called the switch channel. As well, for a Gaussian version of... 

Pollutant emission is one of the most important problems the world faces. Using sustainable energies is among the best solutions which can be employed to reduce CO2 and other pollutants as in Environmental Protection Agency (EPA) standards. In this study, a case study region located in the south of Iran, including 100 households, is studied to find practical methods of investment to partially replace the required energy by renewables where the total emission is confined to the EPA standards. The solar irradiant of the region is 5.36 kWh/m2/day which causes high energy consumption (3000 kWh/day). If the government invests $495705, which is equal to the social penalty that has to be paid for... 

Micro arc oxidation was employed to grow TiO2/hydroxyapatite composite layer on titanium substrate. The correlation between electrolyte concentration, diameter and density of the pores in fabricated layers was investigated. Therefore, the effect of electrolyte concentration on composition and morphology of grown layers was studied using SEM, EDX, XRD and XPS techniques. Samples were coated in electrolytes containing 5, 10 and 15 g/l calcium acetate and 1, 3 and 5 g/l β-glycerophosphate, at optimized voltage for 3 min. Pore size variations obey a similar pattern by the addition of both calcium acetate and β-glycerophosphatein various concentrations based on SEM observations. However,... 

This work presents a procedure for functionalization of graphene sheets from edges by polyglycerol. Hyperbranched polyglycerol with a bi-dentate aromatic segment in its focal point was synthesized and used to sandwich graphene sheets from the cut-edges. Due to the hydrophobicity of the flat surface of the edge-functionalized graphenes and hydrophilicity of their edges, they changed their conformation from the extended- to the closed-state and formed nanocapsules in aqueous solutions. Spectroscopy and microscopy evaluations showed that the average size for nanocapsules is 300 nm. They were able to encapsulate hydrophobic molecules such as doxorubicin in aqueous solutions with a high loading... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

An efficient method for synthesis of 2-iminium-1,3-dithiolane as a new family of ionic liquids with reaction of dithiocarbamates with methyl triflouromethanesulfonate was described. Theoretical study on the synthesized ionic liquids was also performed by quantum chemistry calculation. Geometry optimization on the ion pairs was carried out with the B3LYP/6-311++G(d,p) level of theory. The interaction energies were calculated, and corrected by the basis set superposition error (BSSE) calculated by the counterpoise method. The results of natural bond orbital (NBO) and quantum theory of atoms in molecules (QTAIM) analyses indicate that the interactions occur via hydrogen bonding between oxygen... 

The synthesis of modified versions of deoxyribonucleic acid is an area that is receiving much attention. The replacement of the nitrogen atom on the nucleobases with boron atom has provided insight into deoxyribonucleic acid and ribonucleic acid stability, recognition, and replication at the atomic level. In the present research, we investigated a detailed density functional theory study of the structural, tautomeric, base-pairing ability, bond dissociation energy, and electronic properties of two boron analogues (i.e., boron substitutions at 4-position and 5-position of uracil) of uracil nucleobase. The effects of these modifications on theirs acid-base properties have been considered. Our... 

In this paper a highly efficient optical diode is demonstrated in photonic crystal waveguides with broken spatial symmetry. The structure is made of isotropic linear materials and does not need high power optical beams or strong magnetic fields. While the proposed structure shows almost complete light transmission (>99%) in one direction, it blocks light transmission in the opposite direction. This unidirectional transmission is retained within a wide range of frequencies (>4% of central frequency). In order to achieve an optical diode effect, the optical mode of the waveguide is manipulated by designing an ultra-compact mode converter and an efficient mode filter. The dimensions of the... 

WO3-TiO2 nano porous layers were synthesized by micro arc oxidation (MAO) process under different applied voltages in electrolytes containing sodium tungstate and phosphate salts with various concentrations. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectroscopy (EDS) techniques were employed to study phase structure and chemical composition of the layers. According to our data analysis, the nano porous layers consisted of anatase, rutile, and tungsten oxide phases with a varying fraction depending on the voltage and electrolyte concentration. Moreover, it was found that WO3 not only dispersed in the TiO2 matrix, but also doped into the TiO2... 

Sulfur doped TiO2 layers containing nano/micro-sized pores were synthesized by micro-arc oxidation process. Effect of the applied voltage and the electrolyte composition on physical and chemical properties of the layers was investigated using SEM, AFM, XRD, XPS, and EDS techniques. A UV-vis spectrophotometer was also used to study optical properties of the layers. It was found that the doped layers were porous with a pore size of 40-170 nm. They consisted of anatase and rutile phases with varying fraction depending on the applied voltage and electrolyte concentration. Our XPS investigations revealed the existence of sulfur in the forms of S4+ and S6+ states which substituted Ti4+ in the... 

Congestion management is one of the most important functions of independent system operator (ISO) in the restructured power system. This paper presents two new methodologies for optimal sitting and sizing of distributed generations (DGs) in the restructured power systems for congestion management. The proposed methodologies are based upon locational marginal price (LMP) and congestion rent that forms a priority list of candidate buses to reduce the solution space. The proposed priority list facilitates the optimal placement as well as the level of output power of DGs. The proposed methods are implemented on the IEEE 14-bus and IEEE 57-bus test systems to illustrate their effectiveness. An... 

As a cost-effective and reliable alternative to supply remote areas, standalone hybrid energy systems (HESs) are recently under investigation to address various concerns associated with technical, financial, and environmental issues. This paper presents a comprehensive algorithm that can simultaneously optimize the component size, operation strategy, and slope of the photovoltaic panels of a standalone HES using an improved variant of particle swarm optimization (PSO), designated as the passive congregation PSO. A new operation strategy is proposed based on the set points of the control system. The optimization algorithm determines the optimal values of the set points to efficiently optimize... 

V2O5-TiO2 layers with a sheet-like morphology were synthesized by micro arc oxidation process for the first time. Surface morphology and topography of the layers were investigated by scanning electron microscope (SEM) and atomic force microscope (AFM). Phase structure and chemical composition of the layers were also studied by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques. It was revealed that the composite layers had a sheet-like structure average thickness of which was about 100 nm depending on the applied voltage. The layers consisted of anatase, rutile, and vanadium pentoxide phases fractions of which varied with the applied voltage. The optical properties... 

V2O5-TiO2 porous layers were synthesized via micro-arc oxidation for the first time. The effect of the applied voltage on morphology, composition, and photo-activity of the layers was investigated. The layers, which consisted of anatase, rutile, and vanadium pentoxide phases, revealed an enhanced photo-activity. About 93% of methylene blue solution was degraded on the synthesized layers after 120 min UV-irradiation with a reaction rate constant of k = 0.0228 min-1. The band gap energies of the vanadia-titania and pure titania layers were calculated as 2.56 and 3.39 eV, respectively  

In this research, the effect of applied voltage and electrolyte concentration on structure, chemical composition, optical properties, and especially photo-catalytic activity of the TiO2 layers containing micro/nano-sized pores are discussed. TiO2 layers were synthesized by micro arc oxidation (MAO) process using different electrolyte concentrations and applied voltages. Surface structure of the layers was studied by scanning electron microscope (SEM); furthermore, energy dispersive spectrophotometry (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques were employed to determine phase structure and chemical composition of the layers. Photo-activity of the... 

Pure titania porous layers consisted of anatase and rutile phases, chemically and structurally suitable for catalytic applications, were grown via micro-arc oxidation (MAO). The effect of applied voltage, process time, and electrolyte concentration on surface structure, chemical composition, and especially photocatalytic activity of the layers was investigated. SEM and AFM studies revealed that pore size and surface roughness of the layers increased with the applied voltage, and the electrolyte concentration. Moreover, the photocatalytic performance of the layers synthesized at medium applied voltages was significantly higher than that of the layers produced at other voltages. About 90% of... 

Micro-arc oxidation process was used to synthesize V2O5-TiO2 porous layers for the first time. Surface morphology and topography of the layers were investigated by scanning electron microscope (SEM) and atomic force microscope (AFM). X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques were also employed to evaluate phase structure and chemical composition of the layers. It was found that the V2O5-TiO2 layers consisted of anatase, rutile, and vanadium pentoxide phases fraction of which varied with the applied voltage and the electrolyte concentration. It was also revealed that pore size and surface roughness increased with the applied voltage and the electrolyte...