Sharif Digital Repository

Wireless Body Area Networks (WBANs) are one of the emerging technological trends that have gained a lot of attention both from academic and industrial domains. WBAN, as standardized by IEEE 802.15.6, is a network composed of intelligent, miniaturized, low power nodes that are implanted in, placed on or in close proximity of human body for certain healthcare applications. Sensors send their acquired data to a central hub wirelessly for further processing. In this paper, based on a publicly available channel data set, we investigate the applicable channel models in a typical WBAN. Considering various scenarios with different carrier frequencies, bandwidths, body movements, and transceiver... 

Wireless communication networks may be categorized based on the extent of the geographical area that they cover. The latest trend in this assortment is wireless body area network (WBAN), which is standardized by IEEE 802.15.6 and is defined as a network composed of intelligent, miniaturized, low-power nodes that are implanted in, placed on, or in close proximity to the human body for certain healthcare applications. In this paper, we will start with some assessments on applicable channel models for a typical WBAN. Considering various scenarios with different carrier frequencies, bandwidths, body movements, and transceiver locations, the well-known Bayesian Information Criterion is used to... 

Wireless body area network (WBAN) is composed of miniaturised sensors that operate in the vicinity of the human body for recording the vital physiological signals and wirelessly transmitting them to a central hub for further processing. In this study, a statistical approach is applied to an experimental channel data set to extract the models for the squared channel gain that best describe the characteristics of the transmission medium between the sensors and the central hub. The derived models are then utilised to investigate the error rate performance of WBAN sensors. On the basis thereof, an optimisation problem is formed for which the cost function is the symbol error rate (SER) metric.... 

Wireless body area networks (WBANs) are characterized by short-range wireless communication between inherently resource-limited sensors that operate in the vicinity of the human body for recording certain physiological signals. One of the main limitations of WBANs is in terms of their available power. Since the nodes are typically battery-driven, an efficient power transmission is essential to guarantee long-lasting communications among nodes without the need for frequent battery replacement or charging. In this study, aiming to improve the WBAN performance, we first investigate the power allocation problem by choosing the ergodic capacity and the outage probability as the desired metrics.... 

Inpainting refers to the task of filling in the missing or damaged regions of an image in an undetectable manner. We have an image to be reconstructed in a user-defined region. We use a fast decomposition method to obtain two components of the image, namely structure and texture. Reconstruction of each component is performed separately. The missing information in the structure component is reconstructed using a structure inpainting algorithm, while the texture component is repaired by a texture synthesis technique. To obtain the inpainted image, the two reconstructed components are composed together. Taking advantage of both the structure inpainting methods and texture synthesis techniques,... 

In this paper, a new topology for multicomputer interconnection networks, based on triangular mesh, is proposed. The new network, referred to as the triangular pyramid (or tripy for short), has L levels of triangular mesh. We study some basic important properties of the proposed network as well as introduce a routing algorithm for the tripy network based on the routing of triangular meshes. We prove that this form of pyramidal network is Hamiltonian, Hamiltonian-connected, and pancyclic. We also prove that the proposed network is 6-colorable and conduct a brief comparison of the tripy and its traditional pyramid counterpart. Our results show that the proposed network has higher scalability,... 

In this paper we study the statistical properties of the Signal to Noise Ratio (SNR) of the dual-hop relaying link in a cooperative wireless communication system in the presence of channel estimation errors for Decode and Forward (DF) relaying protocol. Then for assessment of the system performance the Symbol Error Rate (SER) is considered. Two approaches are introduced for SER calculation from which the second one results in a closed form solution. Finally the second approach is used to find an optimum power allocation scheme for transmission of pilot and data symbols at the source and the relay terminals that results in minimizing the SER and considerable amount of power saving. Also Monte... 

In this paper, a new topology for multicomputer interconnection networks, based on triangular mesh, is proposed. The new network, referred to as the triangular pyramid (or tripy for short), has L levels of triangular mesh. We study some basic important properties of the proposed network as well as introduce a routing algorithm for the tripy network based on the routing of triangular meshes. We prove that this form of pyramidal network is Hamiltonian, Hamiltonian-connected, and pancyclic. We also prove that the proposed network is 6-colorable and conduct a brief comparison of the tripy and its traditional pyramid counterpart. Our results show that the proposed network has higher scalability,... 

A communication system incorporating a bit rate limiter (BRL) device is analyzed using recently proposed statistical models for power splitters and combiners. We also consider the possible optical attenuation and amplification before and after BRL device. We obtain the total output moment generating function (MGF) of the number of photoelectrons at the receiver end for two possible synchronization procedures. Furthermore, we use saddle-point approximation method to evaluate the system performance considering the effects of shot-noise, thermal noise, and source extinction ratio  

In this paper, we present a thorough analysis based on photon-counting techniques on temporal/spatial fiber-optic code-division multiple-access systems incorporating both post- and pre-optical amplifiers. In this analysis, we consider the effect of shot noise, thermal noise, and source extinction on system bit-error rate. Our results can be used to estimate the maximum tolerable amount of quantum fluctuations in the received signal  

In this paper, we study and elaborate on the architectural consideration of using multiple optical amplifiers in an all-optical fiber-optic code-division multiple-access (FO-CDMA) network. Our study and considerations are based on obtaining the statistical characteristic functions for photon-counts of a string of output pulses that constitutes the address code in a FO-CDMA network. Optical orthogonal codes (OOCs) with minimum auto- and cross correlation are employed as the address or signature sequence codes. Our analysis is based on chip-synchronous interference only, which provides an upper bound on the system performance. Shot noise, thermal noise, and extinction ratio are considered in... 

In this paper, we present a new methodology for analysis of all-optical fiber-optic code-division multiple-access (FO-CDMA) networks. In this analysis, we propose statistical models, based on photon-counting techniques, for some basic elements of the network, such as splitters, combiners, star couplers, and FO-CDMA passive encoders/decoders. By following the statistical variation of the photon-count of the string of pulses that constitutes the address sequence in an FO-CDMA network, we will be able to reveal the quantum-limited optical signal-to-noise ratio (OSNR) required at the transmitter output to meet the performance limits. Moreover, considering receiver thermal noise and source... 

Self-excited vibrations known as chatter are considered as the most detrimental issue in micro-turning processes. Occurring unpredictably, they adversely affect the tool life, productivity rate and surface quality of the machining processes. In this paper, a novel machining arm is modeled as a piezoelectric stacked rod which is subjected to a chatter force in the orthogonal micro-turning process. Due to the fact that machining processes are affected by various sources of uncertainties, H∞ robust control approach is used to suppress the chatter vibrations of the machining arm in the presence of tool wear and dynamic model parameter variations. Also, input control force of the system is...