Sharif Digital Repository

Simplicity of manufacturing and high reliability of airlift pumps have promoted these pumps to be used in different industries, such as petrochemical and oil industries, especially in oil recovery from dead wells. One of the main parameters affecting the performance of these pumps is two-phase flow regime in the main pipe of the pump. In this research, experimental data are utilized to investigate the influence of the flow regimes on the performance of an airlift pump. The data are obtained for air-water two-phase flow in a vertical pipe with a diameter of d = 50. mm and an aspect ratio of L/d = 120. In this study, the gas liquid upward two-phase flow regime in the upriser pipe is... 

In automobile painting industries, new automobile body products frequently should be tested in order to determine the actual thermal behavior of a paint curing process before starting mass production. During the hardening processes of dipped paint coating, applied in the electrophoretic enameling process, or top paint coating, applied in the final coating process, the automobile body must be warmed up according to the specific paint manufacturer curve. Consequently, prediction of car body temperature during the curing process may be vital in the design and performance analysis of the paint ovens. Numerical simulation of these processes may reduce expensive and time-consuming experimental... 

Electroosmotic flow of power-law fluids in the presence of pressure gradient through a slit is analyzed. After numerically solving the Poisson-Boltzmann equation, the momentum equation with electroosmotic body force is solved through an iterative numerical procedure for both favorable and adverse pressure gradients. The results reveal that, in case of pressure assisted flow, shear-thinning fluids reach higher velocity magnitudes compared with shear-thickening fluids, whereas the opposite is true when an adverse pressure gradient is applied. The Poiseuille number is found to be an increasing function of the dimensionless Debye-Hückel parameter, the wall zeta potential, and the flow behavior... 

Total site integration offers energy conservation opportunities across different individual processes. It also helps for design as well as optimization of the central utility system. It gives massive energy-saving opportunities. The large industrial CHP sites generate heat and power simultaneously. These sites have different steam levels at different pressures which are used for power generation via steam turbines and also directly for satisfying process heat demand. There are many sites requiring cooling demand in hot seasons. In this article, integration of a LiBr/water absorption chiller in a CHP site has been investigated until its cooling demand is satisfied. Low pressure steam at 3 bar... 

Electroosmosis has many applications in fluid delivery at microscale, sample collection, detection, mixing and separation of various biological and chemical species. In biological applications, most fluids are known to be non-Newtonian. Therefore, the study of thermal features of non-Newtonian electroosmotic flow is of great importance for scientific communities. In the present work, the fully developed electroosmotic flow of power-law fluids in a slit microchannel is investigated. The related equations are transformed into non-dimensional forms and necessary changes are made to adapt them for non-Newtonian fluids of power-law model. Results show that depending on different flow parameters... 

Airlift pumps are devices which are widely used in industrial applications. Parameters such as diameter of the pipe, tapering angle of the upriser pipe, submergence ratio, the gas flow rate, bubble diameter, and inlet gas pressure affect the performance of this type of pumps. In this research, the performances of airlift pumps with a vertical upriser length of 914 mm and initial diameters of 6 and 8 mm and various heights for steps, range 0:2 to 0:9 m, in submergence ratio of 0:6 are investigated numerically. The results show the improvement in the performance of step airlift pump (SALP) in comparison with ordinary type (OALP). Considering the effect of height of steps and secondary pipe... 

A facile and one-pot protocol for the synthesis of 2-alkylthio-1,3,4- oxadiazoles is reported. This green method relies on the reaction of acid hydrazides with CS2 and an alkyl halide. The reaction is carried out under mild and environmentally friendly procedure in water with high to excellent yields. Thirteen different valuable alkylthio-1,3,4-oxadiazoles are synthesized from cheap and easily available CS2 with this method. This is the first report for the synthesis of 1,3,4-oxadiazoles in water  

Airlift Systems (ALS) are widely used in various industrial applications. As the main part of the flow through ALS's upriser pipe, is formed by gas-liquid flow, the analysis of such systems will be accompanied by problems of two-phase flow modelling. Several effective variables are involved in ALS; thereupon comprehensive method is needed to consider these parameters. Exergy analysis can be considered as a simple solution for the realisation of the preferred domain of ALS's operation. Here, this method has been proposed to examine the performance of ALS. Based on thermodynamic principles, an analytical model has been implemented in each phase and the respective experimental data have been... 

This is a theoretical study dealing with mixed electroosmotic and pressure-driven flow of a Newtonian liquid in a rectangular microchannel. Both and thermal boundary conditions are considered and the Debye-Hückel linearization is invoked. The governing equations are made dimensionless assuming fully developed conditions and then analytically solved using an infinite series solution. The governing factors are found to be the dimensionless Debye-Hückel parameter, velocity scale ratio, dimensionless Joule heating parameter, and channel aspect ratio. The results indicate that the Nusselt number is an increasing function of the channel aspect ratio, whereas the opposite is true for the velocity... 

Surgical site infection (SSI) is one of the important infectious problems in hospitals. It is well known that appropriate ventilation strategy is most effective way to control bacteria-carrying airborne particles responsible for SSI. With considerable improvement in the computational capacity of computers, computational fluid dynamics (CFD) technique has been widely used to study the indoor airflow and contaminant dispersion over the enclosures. In this research, the effect of inlet air velocity on the ultra-clean ventilation system performance is investigated Eulerian-Lagrangian numerical approach. The results show that surgical wound contamination may be highly affected by inlet velocity.... 

The present investigation is devoted to the second law of thermodynamics analysis of steady-state hydrodynamically and thermally fully developed laminar gasflow in a microannulus with constant but different wall heat fluxes. Slip velocity and temperature jump boundary conditions are usedtodescribe rarefaction effects. Viscous heating is also included for both the wall cooling and heating cases. Using already available velocity profile, closedform expressions are obtained for the transverse distribution of temperature and entropy generation rates. The results demonstrate that the effectof the wall heatfluxes ratioonentropy generation is negligible atlarge valuesofthe group parameter and... 

Increasing concerns about global warming and environmental pollution control has pushed the relevant organizations to set regulations and to develop programs for energy saving. In addition, for many high energy using appliances, energy labeling provides the end user with important data to select energy-efficient equipments and encourage the manufacturers to enhance the performance of their productions. In this research, a new energy-saving program for wet cooling towers has been developed. Considering a thermo-hydraulic analysis, a novel Energy Index (IE) has been extracted which takes all aspects of the problem into account. The present index can be used as a proper criterion for energy... 

Microscale fluid dynamics has received intensive interest due to the emergence of microelectromechanical systems (MEMS) technology. Fluid flow in microdevices has some characteristics which one of them is rarefaction effect related with gas flow. In this work, the steady state laminar rarefied gas flow in the entrance region of parallel plate microchannels is investigated by the integral method with slip flow conditions at solid surface. The effects of Knudsen number on friction factor and Nusselt number are presented in graphical form as well as analytical form. Also the effect of Knudsen number on hydrodynamic entry length is presented. The results show that as Knudsen number increases the... 

In the present work, the second law of thermodynamics analysis has been carried out for steady state hydrodynamically and thermally fully developed laminar gas flow in annulus microchannels with asymmetrically heated walls. The rarefaction effects are taken into consideration using first order slip velocity and temperature jump boundary conditions. Viscous heating is also included for both the hot wall and the cold wall cases. Using the velocity distribution obtained in earlier works, the energy equation is solved to get analytically the temperature distribution and consequently to compute the entropy generation rate. The effects of rarefaction and the annulus geometrical aspect ratio on... 

Two-phase flow simulations around a body were not studied before and considering these flows can play a significant role in long-term reliability and safety of industrial systems. In this paper, flow regimes, drag coefficient and void fraction around different cross-section prisms were considered. To achieve this aim, main equations of flow have been developed for investigation of drag coefficient in air-water two phase. Our numerical analyses were performed by a designed and written CFD package which is based on Eulerian-Eulerian approach. Geometries, which have been studied in this article, are: circle, rectangle and triangle, for different aspect ratio (length over width) and leading edge... 

Adopting the Navier slip conditions, we analyze the fully developed electroosmotic flow in hydrophobic microducts of general cross section under the Debye-Hückel approximation. The method of analysis includes series solutions which their coefficients are obtained by applying the wall boundary conditions using the least-squares matching method. Although the procedure is general enough to be applied to almost any arbitrary cross section, eight microgeometries including trapezoidal, double-trapezoidal, isosceles triangular, rhombic, elliptical, semi-elliptical, rectangular, and isotropically etched profiles are selected for presentation. We find that the flow rate is a linear increasing... 

The aim of this paper is to simulate numerically the airflow induced by a walking visitor and its effects on the contaminant transport and ventilation system effectiveness. To this end, the following models will be used in this study: the Lagrangian Discrete Random Walk (DRW) model to trace the motion of BCPs, the dynamic mesh method to simulate the visitor movement, and the Reynolds Averaged Navier-Stokes (RANS) model to solve the airflow. The validation results of the numerical method are in full agreement with the available experimental data in the literature. The findings of the present study indicate that the visitor's movement has remarkable effect on the basic airflow, and the... 

In this study, a jet propulsion JP combustor is studied numerically to investigate the combustor wall temperature influences on the soot characteristics emitted at its exhaust. There are a number of ways to control the combustor wall temperatures benefiting from different wall cooling technologies. Irrespective of using different high technology cooling systems, it is important to recognize how the wall temperature can affect the soot emission from one specific JP engine. Before examining the main combustor, it is important to assess the accuracy of the computational fluids dynamics (CFD) tool via solving a benchmark problem. In this regard, the predicted flame structure for the benchmark... 

Adomian decomposition method has been applied to evaluate the conduction-convection heat transfer through a straight fin, property distribution due to convection-diffusion, and conduction heat transfer through a slab with temperature dependent thermal conductivity. The Adomian decomposition method (ADM), provides the closed form solution of the non-linear problems without applying any non-realistic simplifications and/or approximations. The obtained analytical solutions are compared with exact and numerical solutions, using finite volume method. It is shown that the numerical simulation has some limitations and may not always produce correct results. However, the Adomian decomposition method... 

In this research, the airflow pattern and particle dispersion in a contaminated full-scale cleanroom are investigated numerically using both Eulerian and Lagrangian approaches. Three different supply diffuser configurations namely (1) central, (2) horizontal and (3) vertical and three different exhaust grille configurations namely (4) vertical symmetric, (5) asymmetric and (6) horizontal symmetric are selected for the analysis. The presented results reveal that the supply/exhaust openings arrangement has a significant influence on the particulate contaminant dispersion in the cleanrooms. The comparison of the above different supply diffuser configurations shows that the vertical and...