Sharif Digital Repository

The combined effects of SiC and carbon additives on the densification, structure and characteristics of pressureless sintered ZrB2-SiC ceramic composites were studied. The ZrB2-SiC (1-10wt%) composite powders were mixed by 1-2wt% carbon. The prepared powder mixtures were then cold-consolidated and sintered in argon environment in the temperature range of 1800-2100°C for 2h. The constituted phases and microstructural evolutions were studied using x-ray diffraction and scanning electron microscope equipped with an energy dispersive x-ray detector. The obtained results concluded that the densification was increased by extending the sintering time and also by prior holding... 

In this paper, an artificial neural network (ANN) model has been developed to predict the yield and tensile strengths of hot pressed NiAl intermetallic compound based on the experimental data from Albiter et al. [A. Albiter, M. Salazar, E. Bedolla, R.A.L. Drew, R. Perez, Mater. Sci. Eng. A 347 (2003) 154]. The predicted results, with a correlation relation between 0.9791 and 0.9921, show a very good agreement with the experimental values. Furthermore, the sensitivity analysis was performed to investigate the importance of the effects of chemical composition and temperature on the mechanical behavior of hot pressed NiAl intermetallic compound. © 2008 Elsevier B.V. All rights reserved  

In this work, the synthesized graphene oxide/TiO2/doxorubicin (GO/TiO2/DOX) composites were loaded into the chitosan/poly(lactic acid) (PLA) solutions to fabricate the electrospun chitosan/PLA/GO/TiO2/DOX nanofibrous scaffolds via electrospinning process. The synthesized composites and nanofibers were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Three-factor three-level central composite design was used to determine the influence of PLA to chitosan ratio, TiO2/DOX content and GO/TiO2/DOX content on the release of DOX from nanofibrous scaffolds. Drug loading efficiency and drug release behavior from... 

In this work, the synthesized graphene oxide/TiO2/doxorubicin (GO/TiO2/DOX) composites were loaded into the chitosan/poly(lactic acid) (PLA) solutions to fabricate the electrospun chitosan/PLA/GO/TiO2/DOX nanofibrous scaffolds via electrospinning process. The synthesized composites and nanofibers were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Three-factor three-level central composite design was used to determine the influence of PLA to chitosan ratio, TiO2/DOX content and GO/TiO2/DOX content on the release of DOX from nanofibrous scaffolds. Drug loading efficiency and drug release behavior from... 

Worldwide energy and environmental issues are forcing researchers to develop a green approach to produce a clean energy. However, traditional methods in reforming of fossil fuels to produce hydrogen (H2) are causing CO2 emission. Hydrogen is therefore an indirect greenhouse gas with a global warming potential. Hydrogen with high specific energy density can be considered as an efficient energy carrier as compared to fossil fuels. But hydrogen production from water splitting reaction has low efficiency, which limits its generation by green approach. For addressing this issue, different chemical hole scavengers have been applied, which is causing further environmental and economic problems. By... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

Global environmental pollution and energy supply demand have been regarded as important concerns in recent years. Metal oxide semiconductor photocatalysts is a promising approach to apply environmental remediation as well as fuel generation from water splitting and carbon dioxide reduction. ZnO nanostructures have been shown promising photocatalytic activities due to their non-toxic, inexpensive, and highly efficient nature. However, its wide band gap hinders photo-excitation for practical photocatalytic applications under solar light as an abundant, clean and safe energy source. To overcome this barrier, many strategies have been developed in the last decade to apply ZnO nanostructured... 

Laser nanomanipulation by metallic nanoparticles, which are smaller than the diffraction limit, has become a great interest, especially in the manipulation of unstained biological samples. However, they are hard to image in bright-field microscopy, because of the diffraction limit. Thus, incorporation of a dark-field microscopy technique with optical tweezers would be an inevitable choice, enforcing the use of the backward scattering detection scheme. Here in this paper, we have taken into account the reflected light from the coverslip along with backscattered light from the trapped particle to validate and reveal some precautions of using this detection scheme, based on Mie-Debye... 

Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

We implement an optical tweezers technique to assess the effects of chemical agents on single bacterial cells. As a proof of principle, the viability of a trapped Escherichia coli bacterium is determined by monitoring its flagellar motility in the presence of varying concentrations of ethyl alcohol. We show that the “killing time” of the bacterium can be effectively identified from the correlation statistics of the positional time series recorded from the trap, while direct quantification from the time series or associated power spectra is intractable. Our results, which minimize the lethal effects of bacterial photodamage, are consistent with previous reports of ethanol toxicity that used... 

Chlorobenzoic acids (CBAs) are recalcitrant and toxic materials which enter the environment directly using pesticides and herbicides, or indirectly through the biodegradation of polychlorinated biphenyl (PCB) compounds. In the conducted study, biodegradation of 4-chlrobenzoic acid was investigated by Lysinibacillus macrolides DSM54T, which had previously been isolated from PCB-polluted soils. Environmental factors including pH, temperature, 4-CBA concentration and inoculation percentage were optimized using response surface methodology (RSM). 58 experiments were designed according to Historical Data, because of the arbitrary selection of experiments, and the combined effects of the...