Sharif Digital Repository

Flow turbulators have crucial importance in heat transfer and energy harvesting applications. Therefore, in this study, the thermo-hydraulic and vibrational behavior of the floe inside a circular tube with vibrational ball turbulators (VBTs) on an axial elastic wire is experimentally studied for the first time. In this novel design, the elastic wire facilitates turbulence by allowing VBTs to move transversally and rotationally and agitate the flow substantially. The effects of diameter and longitudinal distance (pitch) ratios of VBTs, the Reynolds number, and the axial tension of the wire, on the flow friction factor (f), the Nusselt number (Nu), the thermal performance factor (η), in... 

The unique properties of phase change materials (PCMs), such as high latent heat and nearly constant phase change temperature, have made them a suitable option for use in thermal energy storage systems and thermal management systems. However, the low thermal conductivity of these materials has imposed limitations on their widespread use in industries. In this study, for the first time, the effect of injecting a boiling fluid (BF) into the PCM container to enhance heat transfer and accelerate the solidification process has been experimentally investigated. In this regard, paraffin wax and acetone have been selected as the PCM and the BF, and the effects of parameters such as the initial... 

A Lab-On-A-Chip is a micro-scale system whic h utilizes some micro-scale components in order to implement detection tests on samples. One of the most important components of a lab-on-a-chip device is the micro-mixer, which is responsible for appropriately mixing of samples in a short period of time. The biggest problem relevant to mixing in micro scales is that since as the viscous forces are dominant in micro scale and dimensions are small, it is impractical to mix fluids via turbulence, and consequently mixing process is performed by diffusion mechanism. Two major strategies are being used in order to improve the mixing performance and two groups of micro-mixers, passive and active types,... 

Pulsating heat pipe (PHP) is a two-phase device for the means of transferring high heat fluxes and is used extensively for the electronic cooling. In this study the different flow regimes in PHP with different fluids have been investigated. In this research, 3 different fluids including: Pure fluids, Ferro-fluid and surfactant solution with %50 filling ratio have been used. For ferro-fluid, 5 different concentrations and 3 type of magnetic fields have been operated in 2 different heat pipes. Results show that ferrofluid is more stable in Pyrex made-heat pipe for long period of time and no magnet mode has the best thermal performance due to high conductivity of fluid. In copper made-heat pipe... 

The impact of droplets is a widely used method for creating direct heat transfer between two fluids. This method enhances heat transfer between the working fluid and the phase change material (PCM). Therefore, a thorough investigation has been carried out on the impact of an acetone droplet on the surface of a pool of molten paraffin, which leads to the simultaneous boiling of the acetone droplet and solidifying part of the paraffin in contact with the acetone. The dynamics of impact, the depth and width of the crater, the jet, and the crown formed as a result of the impact have been reported with varying Weber numbers (ranging from 74 to 375), and the temperature of the pool surface of the... 

In this project, two Ferrofluidic micropumps that do not need any mechanical moving parts are presented. These micropumps are including simple microchannels containing magnetic fluid plugs that are used as flow actuator and the on/off valve. Using external magnetic field actuation in this type of micropumps, the magnetic fluid would have continuous motion in a channel with micrometer dimensions that would provide the main fluid to be pumped. Although the plug of magnetic fluid has surface contact with operative fluid, but considering its specific features, it would not compine with the pumping fluid. These micropumps may be used to pump the fluids or gases. The outcomes of the investigation... 

Thermopneumatic micropump is one type of positive displacement micropumps, which has many applications due to its relatively large stroke volume, low working voltage, and simple fabrication in microscale. In this paper, a numerical study of heat transfer and fluid flow in a valveless thermopneumatically driven micropump is presented. For rectifying the bidirectional flow, a nozzle and a diffuser are used as the inlet and outlet of the chamber. Since the fluid flow is induced by the motion of a diaphragm, the numerical simulation includes fluid structure interaction, which requires applying a dynamic mesh. The domain of solution is divided into two sections; the actuator unit, which contains... 

Thermal management of micro-electronic devices is a contemporary issue which is increasingly gaining importance in line with the advances in packaging technology. Immediate and consistent multi-disciplinary research is needed to cater to the prevailing trends of net power and flux levels of upcoming micro-electronics products. Material science, packaging concepts, fabrication technology and novel cooling strategies are some of the key areas requiring synchronal research for successful thermal management. Focusing on the latter area, this thesis presents an experimental study on thermal performance of Micro-Closed Loop Pulsating Heat Pipes (MCLPHPs) which are new entrants in the family of... 

On-board hydrogen storage systems (as a substitute for fossil fuels) employing high-pressure metal hydrides, promise advantages including high volumetric capacities and cold start capability. In this project, we discuss the development of a system simulation model in Matlab/Simulink platform. Transient equations for mass balance and energy balance are presented. During driving, the bed requires external heat source, which is planned to be supplied by rejected heat from proton-exchange membrane (PEM) fuel cell. Therefore, this study develops a system-level dynamic model of a PEM fuel cell that is capable of characterizing the mixed effects of temperature, gas flow and capacitance, with... 

Thermo photovoltaic (TPV) is temperature oriented power generation system in which an emitter with temperature value around 1200℃ is usually used for radiation to the cells.Iron and steel industry as a fundamental industry has the most potential of interest for using TPV for recovering of energy. In steel casting unit there is rather high amount of radiation with temperature around 1000℃ which can be recovered by TPV system. The main aim of this dissertation is developing a mathematical model as well as verification of the model experimentally, in which the model is extended for possible using in iron and steel industry.The key modeling parameters of TPV include: open circuit voltage, short... 

The present work illustrates the results of an experimental study of ferrofluid flow in a tube subjected to a constant heat flux on its wall and filled with permeable material under the effect of magnetic field. The aim of this project is investigating the enhancement of heat transfer and obtaining a uniform temperature distribution inside the pipe. In order to achieve this, a porous medium with a porosity of 0.39 and ferrofluid with volume fractions of 0.6, 1.0 and 1.5 are used simultaneously, in the presence of magnetic field. The experiments are held for four different Reynolds numbers of 147.1, 167.3, 184.3 and 205.1. Also, four various modes of the oscillatory magnetic field are applied... 

Due to the operation of proton exchange membrane fuel cell (PEMFC), temperature will rise because of the electrochemical reactions and control of temperature is one of the most important sections that has influence on the performance of the fuel cell. In this study three alternative for cooling and controlling the temperature situation is proposed and compared. the experimental setup consists of the simulated fuel cell that produce heat just like PEMFC and number of thermosyphon miniature heat pipes for evoke the heat and three types of condenser that makes three different scenario for this cooling setup. Free convection, force convection using Fan and force convection using circulating... 

This thesis presents the prototype design and fabrication of magnetically actuated miniature pumps which utilize self-sealing capability of ferrofluid-covered permanent magnets in both pumping and valving mechanisms. The contactless external actuation feature of the design enables integration of the pump with other PMMA-based microfluidic systems with low cost and disposability. The body of the 1st fabricated prototype pump consists of three nozzle/diffuser elements and two pumping chambers connected to the ends of a flat-wall pumping cylinder. A cylindrical permanent magnet placed inside the pumping cylinder acts as a piston which reciprocates by using an external magnetic actuator driven... 

With regard to an increasing world population and the constant capacity of water resources, new and valid methods should be implemented to preserve freshwater resources and accordingly produce drinking water. In the present study, a solar hybrid system was studied by experimental and theoretical means to facilitate the transformation of waste heat from photovoltaic module (PV module) into useful heat that can be used in a solar desalination (SD) system for freshwater production purposes. The study aimed to fabricate a SD system by using both PV module and thermosyphon heat pipes (THPs) technologies in a single system. In the modeling section, the goal is to present a comprehensive model... 

The study of heat transfer using solid-liquid phase shifting has attracted much attention in applied engineering fields such as latent heat energy storage, building walls, waste energy recovery, battery thermal management, and more. Over the past few decades, the literature on phase shift has grown tremendously in terms of theory, laboratory, and numerical studies. Melting of phase change materials in rectangular chambers due to its wide range of engineering applications in fields such as casting, metallurgy, heat energy storage, and heat exchangers used in buildings, as well as aerospace issues including the use of These systems have been the subject of numerous studies on space missions to... 

In this research, two important mechanisms were discussed including droplet generation and jumping mechanisms using electro wetting-on-dielectric. For these purposes, the finite element method (FEM) was used to solve the unsteady Naiver-Stokes equation. In addition, the level set method was applied to capture the interface between two phases. In the current study, first, droplet generation in a T-junction fluidic channel device was studied through using electro wetting actuation. The efficacy of electro wetting on the droplet generation frequency as well as droplet diameter is visible in a T-junction fluidic channel since after applying voltages, specified with non-dimensional electro... 

The water crisis caused by climate change and anthropogenic activities in Iran has affected the daily lives of the people, and since the agricultural sector has a large share of water consumption, greenhouse cultivation and indoor farming has been developing in this country, to improve water productivity. Considering that the main source of energy supply in greenhouses is fossil fuels, in this work, the possibility of improving Industrial Symbiosis (IS) between greenhouses and waste heat sources in industries by employing the Organic Rankin Cycle (ORC) has been studied, in order to meet the heating demand of greenhouses in a more sustainable and eco-friendly way.Based on that, by modeling... 

Improving efficiency of heat exchangers has always been an important concern for the industry. Pulsating heat pipes are novel and efficient technology in the field of heat transfer. Pulsating heat pipes are widely used in solar water heaters, solar desalination systems, air conditioning systems, cooling of electronical boards, etc. these applications explain the necessity of performing this study in our country. In this research, thermal performance of open loop pulsating heat pipes using two operating fluids (ferrofluid with surfactant and aluminum microfluid) is experimentally investigated. Start-up and steady thermal performance of pulsating heat pipes charged with these two operating... 

Thermal management of electronics is a contemporary issue which is increasingly gaining importance in line with the advances in packaging technology. Immediate and consistent multi-disciplinary research is needed to cater to the prevailing trends of net power and flux levels of upcoming microelectronics products. Material science, packaging concepts, fabrication technology and novel cooling strategies are some of key areas requiring synchronal research for successful thermal management. Focusing on the latter area, this thesis attempts to describe the complex thermo-hydrodynamics of Closed Loop ... 

Considering problems related to energy, including high fuel prices, increasing demand, constraints, and environmental pollution, makes it clear that efficiency is one of the major problems in all over the world. Iran’s southern parts and those countries around Persian Gulf face serious shortage of drinking water. Moreover, on top of the other three types of energy production the need for drinking water is highly sensible. Therefore, the use of CCHPW System is the best solution in these areas. The purpose of this design is to empower the control capability of the combined systems over all factors and apply the necessary changes under different conditions. This endeavor requires a program to...