Sharif Digital Repository

Nickel-copper alloy modified glassy carbon electrodes (GC/NiCu) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol and glucose in alkaline solutions. The methods of cyclic voltammetery (CV), chronoamperometry (CA) and impedance spectroscopy (EIS) were employed. The cyclic voltammogram of NiCu alloy demonstrates the formation of β/β crystallographic forms of the nickel oxyhydroxide under prolonged repetitive potential cycling in alkaline solution. In CV studies, in the presence of methanol NiCu alloy modified electrode shows a significantly higher response in oxidation reaction. The peak current of the... 

Semiconducting lead sulfide film was deposited on Stainless Steel (SS) electrode by cyclic voltammetry (CV) at room temperature. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry were used to investigate the electrochemical properties of PbS film in Na2SO4 solution. The voltammetric results showed that oxidative dissolution of PbS film occurred at about 0.21 V vs. Ag/AgCl and total film detachment from the surface occurs with increasing potential. It is concluded that the electrode surface was not passivated by sulfur produced from oxidative dissolution of PbS film. Also, cathodic reduction of the film continued to beyond the hydrogen evolution at -1.35 V vs. Ag/AgCl.... 

Abstract The role of the work function and Fermi level is significant in the performance of the photo-electrochemical cells. We report that a correlation exists between work function and thickness of deposited thin film metals (e.g., Zn, Pb, Co, and Cu). The potential difference between a metal and a reference electrode is used as a rough approach for investigation of work function or the Fermi level. Metal thickness was calculated using faradic current during electrodeposition and further investigated by X-ray diffraction technique. The results show that when thickness decreases the potential also decreases (becomes positive) and the Fermi level of metals electrodeposited on the indium tin... 

Cadmium sulfide (CdS) thin film was electrodeposited on indium tin oxide (ITO) by chronoamperometry. The SEM images showed that hexagonal sheets of CdS deposited on the ITO surface. The X-ray diffraction (XRD) analysis confirmed this structure for CdS crystals and the average of crystalline size and the lattice constant parameters are approximately 39.54 and a = 0.4136, c = 0.6696 nm respectively. Photo-electrochemical investigations were performed by cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS) techniques. CdS band edges and density of states (DOS) were determined by CV technique. The band gap energy (Ebg) was measured... 

Nickel and nickel-manganese alloy modified graphite electrodes (G/Ni and G/NiMn) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol in alkaline solutions. The methods of cyclic voltammetery (CV), chronoamperometry (CA) and impedance spectroscopy (EIS) were employed. In CV studies, in the presence of methanol NiMn alloy modified electrode shows a significantly higher response for methanol oxidation. The peak current of the oxidation of nickel hydroxide increase is followed by a decrease in the corresponding cathodic current in presence of methanol. The anodic peak currents show linear dependency upon the... 

The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution (0.1 mol/L). The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and catalytic activity of the modified electrodes were investigated by cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). It was found that, in the presence of methanol, the modified Ni-based ternary alloy electrode (G/NiCuCo) exhibited a significantly higher response for methanol oxidation compared to the other samples. The anodic peak... 

The electro-oxidation of methanol on nickel and nickel-copper alloy modified glassy carbon electrodes (GC/Ni and GC/NiCu) in a 1 M NaOH solution at different concentrations of methanol was studied by the method of ac-impedance spectroscopy. Two semicircles in the first quadrant of a Nyquist diagram were observed for electro-oxidation of methanol on GC/Ni corresponding to charge transfer resistance and adsorption of intermediates. Electro-oxidation of methanol on GC/NiCu shows negative resistance in impedance plots as signified by semi-circles terminating in the second quadrant. The impedance behavior shows different patterns at different applied anodic potential. The influence of the... 

Nickel and nickel-copper alloy modified glassy carbon electrodes (GC/Ni and GC/NiCu) prepared by galvanostatic deposition were examined for their redox processes and electro-catalytic activities towards the oxidation of glucose in alkaline solutions. The methods of cyclic voltammetry (CV) and chronoamperometry (CA) were employed. The cyclic voltammogram of NiCu alloy demonstrates the formation of β/β crystallographic forms of the nickel oxyhydroxide under prolonged repetitive potential cycling in alkaline solution. It is also observed that the overpotential for O 2 evolution increases for NiCu alloy modified electrode. In CV studies, NiCu alloy modified electrode yields significantly higher... 

Electrochemical deposition of aluminum and manganese from basic and acidic molten AlCl3-NaCl-KCl mixture on an aluminum electrode at 180 °C was studied by the methods of voltammetry, and potential and current transient. The deposition of aluminum was found to proceed via a nucleation/growth mechanism in basic melt, while the deposition of manganese was found to be diffusion controlled in basic melt. The diffusion coefficient of Mn2+ ions in basic melt, as derived by voltammetry was in agreement with the deductions of transient methods. Analysis of the chronoamperograms indicates that the deposition of manganese on Al was controlled by 3D diffusion controlled nucleation and growth. The... 

Electrochemical deposition of aluminum and lead from basic molten AlCl3-NaCl-KCl mixture on an aluminum electrode at 180 °C was studied by the methods of voltammetry, potential and current transient and constant current deposition. The deposition of aluminum was found to proceed via a nucleation/growth mechanism, while the deposition of lead was found to be diffusion controlled. The diffusion coefficient calculated for Pb2+ ions in basic melt by voltammetry was in agreement with the deductions of transient method. The analysis of the chronoamperograms indicates that the deposition process of lead on Al substrates was controlled by 3D diffusion control, nucleation and growth. The processes... 

The mechanism and kinetics of the hydrogen evolution reaction (HER) on tin electrode in 0.1 M H2SO4 solution were studied using the methods of steady-state polarization and electrochemical impedance spectroscopy. The simulation of the data obtained from these two methods, using nonlinear fitting procedure allowed us to determine the rate constants of Volmer, Heyrovsky and Tafel steps associated with the mentioned reaction. The kinetic results indicate that HER mechanism at low negative potentials is a serial combination of Volmer step and parallel Tafel and Heyrovsky steps. At high negative potentials where the hydrogen coverage reaches its limiting value, a Tafel line with the slope of -... 

Nickel and nickel-copper alloy modified glassy carbon electrodes (GC/Ni and GC/NiCu) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol in alkaline solutions. The methods of cyclic voltammetery (CV) and chronoamperometry (CA) were employed. The cyclic voltammogram of NiCu alloy demonstrates the formation of β/β crystallographic forms of the nickel oxyhydroxide under prolonged repetitive potential cycling in alkaline solution. In CV studies, in the presence of methanol NiCu alloy modified electrode shows a significantly higher response for methanol oxidation. The peak current of the oxidation of nickel... 

Nickel - copper alloy modified glassy carbon electrodes (GC/NiCu) prepared by galvanostatic deposition were used for the electrocatalytic oxidation of glucose in alkaline solutions. The electro-oxidation of glucose in a 1 M NaOH solution at different concentration of glucose was studied by the method of ac-impedance spectroscopy. The impedance behavior show different patterns, capacitive, and inductive loops and negative resistances, at different applied anodic potential. The influence of the electrode potential on the impedance pattern is studied and a quantitative explanation for the impedance behavior of glucose oxidation is put forward by a proposed mathematical model. At potentials... 

Nickel hydroxide modified nickel electrodes prepared by cycling the potential of a nickel electrode in alkaline solution exhibited electrocatalytic activity for the oxidation of methane in alkaline media. In the presence of methane the oxidation peak current of nickel hydroxide increases while that of the reverse process decreases. This is attributed to the mediation of nickel species, probably β-NiOOH phase, in the process of electrocatalysis. The mechanism of methane oxidation has also been discussed in terms of the formations of intermediates normally encountered in small organics electro-oxidation. It has also been suggested that in the further oxidation of the intermediates, ions in the... 

Nickel modified graphite electrodes (G/Ni) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol, ethanol, 1-propanol and 2-propanol in alkaline solutions. The methods of cyclic voltammetry (CV), chronoamperometry (CA) and impedance spectroscopy (EIS) were employed. In CV studies, the electrochemical response, peak current varied in the order of MeOH > EtOH > 1-PrOH > 2-PrOH. Under the CA regime, a higher catalytic rate constant obtained for methanol oxidation was in agreement with CV measurements. Lower charge transfer resistance was obtained for low carbon alcohols oxidation and significantly higher... 

Complexes of Ni II-(N,N′-bis(2-hydroxy, 3-methoxy benzaldehyde)-1,2-propandiimine) can be electro-polymerized onto GC electrode in an alkaline solution to give an electro-active film strongly adhered on the electrode surface. In alkaline solution, this poly-(Ni II{sal-1,2-pn(3-OMe) 2})/GC film shows the typical voltammetric response of a surface-immobilized redox couple, as can be anticipated for the Ni 2+/Ni 3+ transitions into the film. In addition, the film exhibits a potent and persistent electro-catalytic activity towards the oxidation of 1- and 2-propanol. In CV studies, in the presence of these alcohols, poly-(Ni II{sal-1,2-pn(3-OMe) 2})/GC electrode shows a new oxidation peak for the... 

Electro-oxidation of methanol in alkaline solution at a glassy carbon electrode electrochemically modified by a conductive polymeric meso-tetra(4-carboxyphenyl)porphyrinato nickel(II), abbreviated as poly-NiTCPP and also meso-tetra(4-carboxyphenyl)porphyrin with incorporated nickel(II) cations, abbreviated as, poly-TCPP/Ni, were investigated and compared. Both films were prepared by oxidative electro-polymerization of complexes by repetitive cyclic voltammetry (RCV) in 0.1 M NaOH aqueous solution. The electrochemical properties and behaviors and also kinetic values of both films have been characterized and compared using cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical... 

A stable copper (hydr)oxide-modified electrode was prepared in 0.5 mol/L NaOH solution by cyclic voltammetry in the range of -250 to 1000 mV. It can be used for electrochemical studies in the range of -250 to 1000 mV without interfering peaks because there is no oxidation of copper. During an anodic potential sweep, the electro-oxidation of saccharose on Cu occurred by the formation of CuIII and this reaction also occurred in the early stages of the reversed cycle until it is stopped by the negative potentials. A mechanism based on the electro-chemical generation of CuIII active sites and their subsequent consumption by saccharose was proposed, and the rate law and kinetic parameters were... 

Ni II-(N,N′-bis(2,4-dihydroxyacetophenone)-2, 2-dimethylpropandiimine (Ni II{salnptn(4-OH) 2}) complex has been encapsulated within the supercage of zeolite-NaY by reacting Ni 2+-exchanged NaY with the flexible Schiff-base ligand that diffuses into the cavities. The encapsulated complex is characterized by EDX, scanning electron microscopy, powder X-ray diffraction, FT-IR, and cyclic voltammetry studies. Density functional calculation is being carried out on both the free nickel Schiff-base complex and that encapsulated in NaY zeolite to investigate changes in structural parameters, energies of the HOMO and LUMO, and absolute hardness and softness. Electrochemical properties of the NaY...