Sharif Digital Repository

The design of a power-efficient second-order Δ/∑ modulator for voice-band is presented. At system level, a new single-loop, single-stage modulator is proposed. The modulator employs only one class-AB op-amp to realize a second-order noise shaping for voice-band applications. The modulator is designed in a 0.25μm standard CMOS process, and exhibits 86 dB dynamic range (DR) for a 4 kHz voice-bandwidth. The proposed modulator consumes 125μW from a 2.5 V supply. © Springer Science + Business Media, LLC 2006  

In this paper, an algorithm for fault diagnosis of permanent magnet DC electromotors.has been investigated, based on vibration and electrical current monitoring. Several permanent magnet DC electromotors.with previously determined faults have been prepared and the vibration, current and speed data have been measured. The relationship between certain related measured data and faults has been determined. A fault diagnosis algorithm has been developed in this research based on these relationships. This algorithm can be used in mass production lines for quality control  

The Nafion ionomer affects the efficiency of the platinum (Pt) catalyst by blocking the active sites thereby restricting the gas permeability of the catalyst layer; but, there is a limitation in the quantity of Nafion ionomer that needs to be added without affecting the cell performance. Sulfonation of carbon-supported catalysts as mixed electronic and protonic conductors has been reported to be an efficient way to increase the triple-phase boundaries. In order to improve the utilization and activity of cathodic catalysts in the oxygen reduction reaction (ORR), Pt nanoparticles were loaded on a mixture of Vulcan XC-72R and MWCNTs, which were functionalized in a mixture of 96% sulfuric acid... 

Signed graphs are graphs whose edges get signs ±1 and, as for unsigned graphs, they can be studied by means of graph matrices. Here we focus our attention to the largest eigenvalue, also known as the index of the adjacency matrix of signed graphs. Firstly we give some general results on the index variation when the corresponding signed graph is perturbed. Also, we determine signed graphs achieving the minimal or the maximal index in the class of unbalanced unicyclic graphs of order n≥3. © 2019  

In this study, we present results of a mathematical model in which the governing equations of electroforming process were solved using a robust finite element solver (COMSOL Multiphysics). The effects of different parameters including applied current density, solution electrical conductivity, electrode spacing, and anode height on the copper electroforming process have been investigated. An electroforming experiment using copper electroforming cell was conducted to verify the developed model. The obtained results show that by increasing the applied current density, the electroforming process takes place faster, thereby resulting in a higher thickness of the electroformed layer. In addition,... 

The objective of this paper is to provide optimization of falling film Li/Br solution on a horizontal single tube based on minimization of entropy generation. Flow regime is considered to be laminar, the effect of boiling has been ignored and wall temperature is constant. Velocity, temperature and concentration distributions are numerically determined and dimensionless correlations are obtained for predicting the average heat transfer coefficient and average evaporation factor on the horizontal tube. Thermodynamic imperfection due to passing lithium bromide solution is attributed to non-isothermal heat transfer; fluid flow friction and mass transfer irreversibility. Scale analysis shows that... 

In this paper, heat and mass transfer phenomena occurring simultaneously in falling film generator of absorption chillers have been studied. The analysis is based on the laminar flow of an Li/Br solution over a horizontal single tube and tube bundle having a constant tube wall temperature. The effect of boiling has been ignored. An extensive numerical code is provided to calculate the heat transfer coefficient and the rate of evaporation. A parametric study is performed on the coefficient of heat transfer and the evaporation flux of the refrigerant. Dimensionless correlations are obtained to calculate the heat transfer coefficient on the horizontal tube and tube bundle. The comparison... 

A new wearable assistive device (WAD) was developed to decrease required force on the lumbar spine in static holding tasks. In order to obtain moments on lumbar spine in two conditions, with and without WAD, a biomechanical static model was used for estimation of external moments on lumbar spine. The results of biomechanical models indicated that there was a reduction in the lumbar moment ranging from 20% to 43% using WAD depending on the load and flexion angle. A total of 15 male healthy subjects were tested to experimentally verify the predicted reduction of external moments on the spine by wearing WAD. Normalized electromyography (EMG) of the right and left lumbar and thoracic erector... 

It is not common to build a geomechanical model for depleted reservoirs as logging and coring are costly and time consuming in such reservoirs. On the other hand, in regular analysis of wellbore stability, the effect of time is completely ignored. As a result, with time there will be some errors in the evaluation of wellbore stability in depleted reservoirs. In order to determine the optimum wellbore trajectory during the reservoir life, it is necessary to have a model which can estimate the rock properties based on the first full logging suite and also consider the depletion effect. In this study, a novel model is proposed which combines a mechanical earth model, borehole circumferential... 

The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results... 

Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,... 

The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of... 

Cell culture feeds optimization is a critical step in process development of pharmaceutical recombinant protein production. Amino acids are the basic supplements of mammalian cell culture feeds with known effect on their growth promotion and productivity. In this study, we reported the implementation of the Plackett-Burman (PB) multifactorial design to screen the effects of amino acids on the growth promotion and productivity of a Chinese hamster ovary DG-44 (CHO-DG44) cell line producing bevacizumab. After this screening, the amino acid combinations were optimized by the response surface methodology (RSM) to determine the most effective concentration in feeds. Through this strategy, the... 

N-annulated perylene based materials show outstanding and tunable optical and physical properties, making them suitable to be charge transport materials for optoelectronic applications. However, this type of materials has so far not been well studied in solar cells. Here, we develop a new hole transport material (HTM), namely S5, based on perylene building block terms, for organic-inorganic hybrid perovskite solar cells (PSCs). We have systematically studied the influences of the film thickness of S5 on their photovoltaic performance, and a low concentration of S5 with a thinner HTM film is favorable for obtaining higher solar cell efficiency. S5 shows excellent energy alignment with... 

Antisolvent crystallization is known as an effective approach for the deposition of pinhole-free solution-processed perovskite layers for high-performance solar cells. Here, we introduce a modified antisolvent dripping method by adding tetra ethyl orthosilicate (TEOS) into chlorobenzene as a conventional antisolvent. Through TEOS modification, perovskite solar cells show efficiencies as high as 16% with more than 85% retention after 290 h storage at ambient conditions in comparison to 20% in pristine cells. This significant enhancement in efficiency and stability mainly related to the decrement of the density of surface defects, which is confirmed by considerably enhanced photoluminescence... 

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition